User's Manual

Broadband Security Router User Guide
- 9 -
Setting Up the TCP/IP Protocol
If you are not sure whether the TCP/IP Protocol has been installed, follow these steps to
check, and if necessary, install TCP/IP onto your PCs.
1. Click the “Start” button. Choose “Settings”, then “Control Panel”. Double-click
the “Network” icon. Your Network window should appear as follows:
2. Select the “Configuration” tab.
Important:
For Windows 2000 & Windows XP Setting, you will find that they differs with
Windows 98/ME/NT slightly. See the following for reference.
Click the “Local Area Connection” icon on the lower right hand side of your
desktop screen.