User Manual

Package contents
• Rocketsh Miracast Video Receiver
• 6" HDMI adapter
• 30" Micro USB charger cable
• Quick Setup Guide
System requirements
• Digital TV with an HDMI jack and a USB port
Features
• Requires Android™ Jellybean 4.2.1 or newer
• Works with compatible devices such as your phone or tablet to deliver signals to
your TV, projector or other audio/video devices.
Installing your receiver
1 Turn o the TV.
2 Insert the Rocketsh Miracast Video Receiver into the HDMI port on your TV. If the
video receiver will not t into the HDMI port on your TV (too large or too wide), use
the 6" HDMI adapter for a better t.
3 Insert one end of the 30" cable into the micro USB port on the receiver. Insert the
other end into the USB port on your TV.
4 Turn on your TV, then press the TV’s Input or Source button to select the input HDMI
input of the Rocketsh Wireless Video Receiver.
5 The LED on the Rocketsh Miracast Video Receiver starts to blink and boot up. The
splash screen on your TV is displayed within 30 seconds. If the LED doesn’t blink or
the boot up splash screen is not seen, check to make sure that the TV input you have
selected is correct and the Rocketsh Wireless Video Receiver has power and is fully
inserted.
Setting up your receiver connection
For the rst time use, the Rocketsh Miracast Video Receiver will boot up and go into
the Auto mode and is ready to accept a Wi-Fi Direct connection.
1 Verify the TV screen shows Rocketsh Wireless Video Receiver screen as shown below.
2 On your Miracast mobile device, such as a mobile phone or tablet, turn on the Wi-Fi
network.
3 Press the WPS button on the Rocketsh Miracast Video Receiver for rst-time
connection.
4 Go to Settings > Display > Wireless Display and select the SSID noted in Step 1.
5 When the connection is successful, your Miracast device’s (such as your phone)
screen is displayed on your TV, indicating that video streaming has started.
One-year limited warranty
Visit www rocketfishproducts com for details
Legal notices
FCC Statement
Before using your new product, please read these instructions to prevent any damage.
Receiver
6" HDMI adapter
30" Micro USB
cable charger
QUICK SETUP GUIDE
Rocketsh Advanced Miracast Video Receiver
RF-WFD301
Need additional help?
See your User Guide! This comprehensive guide includes
everything from basic how-to steps to more advanced features.
Go to www.rocketshproducts.com, then click Support &
Service. Enter your model number in the Manual, Firmware,
Drivers & Product Information, then click Search.
Wireless Video Receiver
Choose network, press Enter to connect.
SSID: BBY-41-a048
Discovery Channel: 11
Operating Channel: 149
Status: Searching for peers
Settings
Device ID: 0A:FB:1C
RF-WFD301_12-1246_QSG_V1_EN.ai 1 1/11/2013 2:34:57 PMRF-WFD301_12-1246_QSG_V1_EN.ai 1 1/11/2013 2:34:57 PM
V1
FINAL
FOR PRINT