Quick Reference Guide

Quick reference guide

Find software, recommended accessories and tested games at

cybershoes.io/support

Turn on: Press button on shoe

Turn o󰀨: Press and hold button on shoe for

6 seconds (until red light is visible)

Shoes indicate charging state when on.

Shoes charge when o󰀨 as well but do not indicate.

Change channel (multiplayer only):

1. SHOES: Press the button for power on

RECEIVER: connect with USB cable

2. wait for the 1 second LED light signal

3. wait until the 1 second LED signal goes o󰀨

4. then immediately press button and cycle through

the color-coded channels. Google Youtube: „Cybershoes frequency“

Shoes and receiver must blink in the same color! If a shoe misses on receiver this shoe is set to the wrong channel.

Cyberchair

If not already removed: remove cap from gas lift.

Cable management with cable rectractor

In the Cybershoes package you nd a cable retractor.

Attach it to a recommened tripod and with the cable

tie to the VR cable: see cybershoes.io/support

Headset to retractor: 90cm / 35“ (on cable)

Retractor to joint of tripod: 140cm / 55“ (on cable)

Height of retractor: 210cm / 82“ above ground

As an alternative you can mount the retractor to the

ceiling or to a suspended wire or wooden batten.

Recommendations for bar stool and cable management: cybershoes.io/support > bar stools & cable management

Cable management with IKEA Regolit

Do not use the "last element" with the cable and lamp socket.

Cable management with AliExpress Ceiling suspension

Thrid party bar stool

Use gas lift that comes with cybershoes

cable tie

CHANGE CHANNEL BUTTON

CHANNEL INDICATOR LED

INPUT SPEED MULTIPLIER

ROLL

CHANNEL INDICATOR LED

CHANGE CHANNEL BUTTON

TO PC

PAGE 1
Quick reference guide Find software, recommended accessories and tested games at cybershoes.io/support Turn on: Press button on shoe Turn off: Press and hold button on shoe for 6 seconds (until red light is visible) TO PC CHANGE CHANNEL BUTTON CHANNEL INDICATOR LED INPUT SPEED MULTIPLIER Shoes indicate charging state when on. Shoes charge when off as well but do not indicate. Change channel (multiplayer only): CHANNEL INDICATOR LED 1.
PAGE 2
On the STEAM platform (steampowered.com), install and launch Cybershoes software. A Step by Step Guide can be found on the STEAM Cybershoes store page, and on cybershoes.io/support Before buying a game for use with Cybershoes, check the compatibility with your headset: cybershoes.io/games or open the Cybershoes UI>GAMES Join the Cybershoes Think Tank facebook.com/groups/cybershoes for knowlegde base and feedback. Meet and play with Cybershoes peers: steamcommunity.