User’s Manual MBP15A6 MBP20A6 MBP30A5 CyberPower Systems (USA), Inc. 4241 12th Avenue East Suite 400 Shakopee, MN 55379 Phone: 877-297-6937 Fax: 952-403-0009 www.CPSww.
IMPORTANT SAFETY INSTRUCTIONS This manual contains important instructions. Please read and follow all instructions carefully during installation and operation of the unit. Read this manual thoroughly before attempting to unpack, install, or operate the Maintenance Bypass PDU (MBP). CAUTION! The MBP must be connected to a grounded AC power outlet with a fuse or circuit breaker protection. DO NOT plug the MBP into an outlet that is not grounded.
UNPACKING User’s manual Registration card Rackmount brackets (2) Flat head screws: M4X8L (4) 15A / 20A or 30A MBP (Maintenance Bypass PDU) Pan head screws: M5X12L (4) 2 Copyright © 2014 CyberPower Systems, Inc.
HARDWARE INSTALLATION HARDWARE INSTALLATION The MBP can be mounted in a rackmount or vertical tower orientation. Please follow the instructions below for the respective mounting methods. Step 1: Brackets installation Attach the two brackets to the MBP using the provided screws M4X8L*4pcs.
HARDWARE INSTALLATION MBP mounted vertically in a rackmount MBP mounted with a CyberPower UPS in tower mode Wall-mounted 4 Copyright © 2014 CyberPower Systems, Inc.
CONNECTING THE INPUT/ OUTPUT CONNECTING THE MAINTENANCE BYPASS PDU TO A UPS Connect the input/output as shown in the following diagrams. 5 Copyright © 2014 CyberPower Systems, Inc.
BASIC OPERATION MBP FRONT PANEL DESCRIPTION 1. AC Output Outlets The AC outlets provide output power to the connected equipment. The MBP can be manually set to Bypass to insure power is provided from the utility source when performing maintenance or replacing the UPS. 5. “To UPS Output” power cord Connect the AC Power cord to a UPS outlet. 6. “To UPS Input” Outlet Connect the AC Power cord from the UPS. 2.
MAINTENANCE MAINTENANCE BYPASS PDU OPERATION Qualified personnel can use the bypass feature of the MBP to disconnect it from the UPS, without disrupting power to connected equipment, to perform maintenance to or replace the UPS. The connected equipment is supplied by UPS output when the Manual Bypass Switch is turned to “Normal”. The connected equipment is supplied by utility power when the Manual Bypass Switch is turned to “Bypass”. 7 Copyright © 2014 CyberPower Systems, Inc.
TECHNICAL SPECIFICATIONS Model MBP15A6 Configuration Form Factor MBP20A6 MBP30A5 >1U 19” rack-mounting with multi-position mounting 19” rack horizontal or vertical mounting on CyberPower RT UPSs Yes, Yes, Yes, NEMA 15A output socket NEMA 20A output socket NEMA 30A output socket Installation Cascading Input Input Voltage Range Input Current Rating (Derated) Plug To Utility Power Outlet for UPS Input Power Plug To UPS Output Output Transfer Time (Typical) Outlets Status Indicators LED Indicators Physic
COMPATIBILITY LIST FOR CYBERPOWER UPS FOR MODEL MBP15A6 ONLY OL1000RTXL2U, OL1000RT JP, OL1000RTXL2UTAA, OL1000XL, OL1000 JP, OL1000XLTAA, OL1500RTXL2U, OL1500RT JP, OL1500RTXL2UTAA, OL1500XL, OL1500 JP, OL1500XLTAA, CPSXSL and where X may be 280, 300, 320, 350; Y may be 350, 385, 400, 420, 450,480, 500, 520, 560, 580, 600, 620, 650, MN525, CPS425SL, SYC-650BB, 25654, CPSXAVR, where X may be 1000, 950, 900, 870, 850, 820, 800, 780, 750A, 720A, 700A, CPXSL, where X may be 420, 400, 385, 280, 350, 325, 320,
COMPATIBILITY LIST FOR CYBERPOWER UPS FOR MODEL MBP20A6 ONLY OL2200RTXL2U, OL2200RT JP, OL2200RTXL2UTAA , OL2200XL, OL2200 JP, OL2200XLTAA, SP2200, SP2000, SP1800, SP1600, PRY-2U, GRK-Y-2U, PRYX-2U, GRK-YX-2U, where Y may be 2200, 2000, 1800, 1600, PP2200, PP2000, PP1800, PP1600, OR2200LCDRM2U, OR2200LCDRT2U, OR2200LCDRT2UTAA, PR2200LCDRT2U, EP-400-UPS-8HTR-2200, PR2200LCDRT2UTAA, PR2200LCDRTXL2U, PR2200LCDRTXL2U-CH, PR2200LCDRTXL2U-HH, PR2200LCDRTXL2UTAA, OR2200LCDRTXL2U, OR2200LCDRTXL2UTAA, OR2200PFCRT2U
PRODUCT REGISTRATION CyberPower requests that you complete and return the Warranty Registration Card enclosed with the Product or register the Product at its website (www.cpsww.com) to establish that you are the Initial Customer of the Product, and therefore entitled coverage under the Limited Warranty. (Registration is not required for coverage, but note: if you do not register your purchase, you will be required to provide proof of purchase.
LIMITED WARRANTY Who Pays For Shipping? We pay when we send items to you; you pay when you send items to us. What Are Some Examples Of What This Warranty Does Not Cover? 1. This Warranty does not cover any software that was damaged or needs to be replaced due to the failure of the Product or any data that is lost as a result of the failure or the restoration of data or records, or the reinstallation of software. 2.
LIMITED WARRANTY This document is believed to be accurate, but CyberPower reserves the right to change or correct the contents and does not assume any responsibility for omissions or errors. Need Additional Help? Feel free to contact our Tech Support department with installation, troubleshooting, or general product questions. CyberPower Technical Support Phone: 1-877-297-6937 Email: tech@cpsww.com Web: www.CPSww.
