Notes: Before using this information and the product it supports, be sure to read important Safety Information on page ii. Some instructions in this guide may assume that you are using Win 7/ Win 8.1/Win 10. If you are using another Windows Operating System, some operations may be slightly different. If you are using other Operating System, some operation may not apply to you, but should not affect your use of this Tablet.
Dear User, Before using this product, make sure to read this user guide carefully. We are pleased that you have chosen us for your mobile computing needs. To help you master the usage of your new Tablet quickly, we have prepared this user guide. In this manual you will find information on the system configuration, basic operating instructions, and important notices. We have done our best to avoid any error in making sure that the information provided in this manual is accurate and reliable.
Contents Important Safety Information ……………………………………….Page 4 Chapter 1. Getting to know your Tablet …………………………..Page 6 Features and Specifications ………………………………………..Page 6 System over view ……………………………………………………..Page 9 Chapter 2. Learning the Basics …………………………………….Page 14 Chapter 3. Troubleshooting …………………………………………Page 16 Chapter 4. BIOS setting ………………………………………………Page 17 Appendix A. Use and Care Information …………………………...Page 21 Appendix B. Optional Devices Information …………….………...Page 24 1.
Important Safety Information Important Safety Information This information can help you safely use your Tablet PC. Follow and retain all information included with your Tablet. The information in this document does not alter the terms of your purchase agreement. Intended use: The CyberMed Rx and Rugged X10 are intended to serve as a medical monitor that is designed for general purpose for hospital/commercial environment and for diagnosis. It could be used for PACS, LIS and Electronic Medical Record purposes.
follow the instructions hereafter. Unpack Inspect the covers of the Tablet and the AC adapter, especially parts with the following labels attached for any crack or damage. Danger: Hazardous voltage, current and energy levels are present inside any component that has this label attached. Workplace Do NOT use the Tablet in humid places such as a bathroom. Keep the Tablet and other parts away from liquids. Danger: An electric shock may be caused by spilled liquid.
Caution: Chapter 1. Getting to know your Tablet This manual refers to both the Medical model known as CyberMed Rx and the Enterprise model known as Rugged X10 Windows Tablet. 1) CyberMed Rx Medical Tablet 2) Rugged X10 Enterprise Grade Tablet Note: CyberMed Rx is white color plastic housing with anit-germ technology. Rugged X10 is black color plastic housing for commercial application. Both of CyberMed Rx and Rugged have same configuration.
Note: The following specification may contain technical inaccuracies or typographical errors. Cybernet reserves the rights to improve and/or change specifications at any time without notice. Form Factor Display 10.1” (16:10 format) with LED backlight Maximum resolution 1920 x 1200 Back light: 400nits Power Input 1 x DC-19V With 3.15A / 3.78A / 6.
Built-in Echo cancellation I/O Port Control buttons 1 x USB3.
System overview Front No.
2 Finger Print Full type biometric module, Startek standard, Optional Crossmatch, FIPS 201 certified and Imprivata OneSign. 3 Front Camera 2.
Back 11
No. 1 Item Description Internal USB port USB2.0 internal port for external module device (Only for service personnel) Pin definition: 1: 5V, 2: USB-, 3: USB+, 4: GND 2 Battery Hot swap battery have Blue LED indicator. When press the button indicator will display battery capacity 3 Rear Camera (option) 5.
Side No. Item Description 1 1D/2D scanner (Option) Support 1D/2D white LED barcode scanner 2 DC Jack Support 19V input adapter 3 Smart Card Reader (Option) Support ISO7816-1,2,3 4 I/O USB3.
TOP & Bottom No. 1 Item Description Power Button Press to turn the Tablet on; Press again to turn the Tablet to sleep mode; Press and hold 4 seconds to force shutdown. 2 Scanner On/Off Press to turn on or off scanner device power, the status shown as LED indicator 3 Scanner Trigger Press to trigger scanner for scan barcode. 4 Docking connector Water proof docking connector to connect Desktop / VESA docking device. Chapter 2.
Humidity (Non-condensing): Operating: 10% to 90% Non-operating: 10% to 90% Pressure 700 to 1060hPa (0-3000m) Connecting to the power: The battery is not fully charged at purchase. To charge the battery and begin using your Tablet, connect a Hospital Grade power cord to the AC adapter. The battery is automatically charged while the Tablet is running on AC power. Connecting the Tablet to an electrical outlet: 1. Connect Hospital Grade used Power Cord to the AC Adapter. 2.
Connecting a universal serial bus (USB) device: Your Tablet comes with one USB port compatible with USB devices. Note: When using a high power consumption USB device such as USB ODD, use the external device’s power adapter. Otherwise, the device may not be recognized resulting in system shutdown.
Chapter 3. Troubleshooting Troubleshooting This section only describes problems that might negate the need to refer to the more comprehensive information in Chapter 2. Start Up problems: 1. When I turn on the Tablet, nothing appears on the screen. If the screen is blank, make sure that: - The AC adapter is connected to the Tablet and the power cord is plugged into a working electrical outlet. - The Tablet power is on. (Press the power button again and check power LED indicator for confirmation.) 2.
Chapter 4. BIOS Setup The BIOS provides a Setup utility program for specifying the system configurations and settings. The BIOS ROM of the system stores the Setup utility. When you turn on the computer, the BIOS is immediately activated. Pressing the key immediately allows you to enter the Setup utility. If you are a little bit late pressing the key, POST (Power On Self Test) will continue with its test routines, thus preventing you from invoking the Setup.
Brand String Intel(R) Core(TM) i5-530 2700 MHz 306d4 F 2Corer(s)/4Threa d(s) →← Select Screen 16 ↑↓ Select Item GT2 (600 MHz) Enter: Select +- Change Opt. 1036 F1: General Help F2: Previous Values 2.5.0.3 4096 MB (DDR3) F3: Optimized Default F4: Save & Exit 1600 Mhz ESC: Exit Frequency Processor ID Stepping Number of Processors Microcode Revision GT Info IGFX VBIOS Version Memory RC Version Total Memory Memory Frequency MCU Information MCU FW Version 1.0 System Date System Time [Tue 01/20/2009] [00.00.
↑↓ Select Item Enter: Select +Change Opt. F1: General Help F2: Previous Values F3: Optimized Default F4: Save & Exit ESC: Exit ► PCH-IO Configuration Security Settings This section allows you to configure and improve your system and allows you to set up some system features according to your preference. Main Advanced Chipset Security BootSave & Exit Password Description If ONLY the Administrator’s password is set, then this only limit access to Setup and is only asked for when entering Setup.
Boot Option Priorities Boot Option #1 Hard Disk Boot Option #2 Boot Option #3 Boot Option #4 Boot Option #5 Boot Option #6 Boot Option #7 Boot Option #8 CD/DVD USB Hard Disk USB CD/DVD USB Key USB Floppy USB LAN Network → ← Select Screen ↑↓ Select Item Enter: Select +- Change Opt.
Keep your Tablet away from magnet. Avoid subjecting the Tablet to extreme temperatures (below 0°C or above 35°C). Be gentle with your Tablet: Avoid placing any object (including paper) on the display. Do not drop, bump, scratch, twist, hit, vibrate, push, or place heavy object on your Tablet, display, or external device. Before moving your Tablet, be sure to remove any media, turn off attached devices and disconnect cords and cables.
When transferring data to or from a Flash Media Card, do not put your Tablet in sleep mode before the data transfer is complete. To do so might damage your data. Cleaning the surface of the Tablet: Occasionally clean your Tablet as follows: Any industrial grade alcohol wipe or spray or diluted detergents( nonbleach type) , would be acceptable on Both the CyberMed Rx / Rugged X10-body and glass.
Check the capacity of your storage drive from time to time. If the storage drive gets too full, Windows will slow down and might produce errors. Empty your recycle bin on a regular basis. Use the Microsoft Disk Defragmenter on your storage drive on a regular basis to improve data search and read time. To free up disk space, uninstall unused application programs. Clean out your Inbox, Sent, and Trash folders from your e-mail client program. Make a point to back up your data at least once a week.
Form Factor No. Item Description 1 LAN 10/100/Gigabit LAN, Support Wake on LAN and PXE. 2 DC-IN 19V input with 19V/6.31A 120Watt adapter Power by an adaptor, EDACPOWER Electronics CO., Ltd EM11011M I/P: 100-240Vac, 2.0-1.0A, 50-60Hz 3 USB2.0 2 x USB 2.0 The USB interface supports Plug and Play. (Optional USB1.
VESA Docking Station Dimension 28
Form Factor No. Item Description 1 LAN 10/100/Gigabit LAN, Support Wake on LAN and PXE. 2 DC-IN 19V input with 19V/3.78A Power by an adaptor EM10681V, 72W, Made by EDAC Power Electronics Co., Ltd and FSP065-DBBM1, 65W, Made by FSP TECHNOLOGY INC. for EN60601-1:2006,IEC606011:2005 3 USB2.0 2 x USB 2.0 The USB interface supports Plug and Play. (Optional USB1.
screws (4.0mm x 13.0mm) Appendix C. Notices Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules.
To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. For body exposure, this device has been tested and meets FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the device a minimum of 0 mm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
order to reduce the potential for causing interference to radio and TV communications and to other electrical or electronic equipment. Such cables and connectors are available from Cybernet authorized dealers. Cybernet cannot accept responsibility for any interference caused by using other than recommended cables and connectors. Canadian Notice This Class B digital apparatus complies with Canadian ICES-003 Cet appareil numérique de classe B est conforme à la norme NMB-003.
2. Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation d'au moins 0 cm doit être maintenue entre l'antenne de cet appareil et toutes les personnes Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
WEEE Statement (Waste Electrical and Electronic Equipment) The WEEE directive places an obligation on EU-based manufacturers, distributors, retailers and importers to take-back electronics products at the end of their useful life. A sister Directive, ROHS (Restriction of Hazardous Substances) compliments the WEEE Directive by banning the presence of specific hazardous substances in the products at the design phase. The WEEE Directive covers products imported into the EU as of August 13, 2005.
Cybernet has an e-recycling program that is very easy to use. Just follow the steps explained below or go to our website at www.cybernet.us 1. Request an RMA via phone, email or support request. 2. We will arrange a call tag to have the product picked up. Just have it packed and ready to ship. We do the rest! Cybernet Manufacturing 5 Holland Irvine, California 92618 Free: (888) 834-4577 Phone: (949) 600-8000 Fax: (949) 600-8013 www.cybernet.us sales@cybernet.
