RKP115 / RKP117 / RKP119 User Manual 4. Package Contents LCD Monitor Drawer with IP KVM Switch 1 Piece User Manual 1 Piece DC Power Adapter 1 Piece Power Cord 1 Piece Mounting Bracket 1 Pair Fasteners 4 Pieces CD-6 3-in-1 KVM cable 8 Pieces Before Unpacking It is very important to locate the LCD Keyboard Drawer in a suitable environment. ● The surface for placing and fixing the LCD Keyboard Drawer should be stable and level or mounted into a suitable cabinet.
RKP115 / RKP117 / RKP119 User Manual 5. Optional Accessories KVM Cable CD-6 / 10 / 15 6ft / 10ft / 15ft PS/2 3-in-1 cable Cascade Cable CA-2 / 6 / 10 / 15 2ft / 6ft / 10ft / 15ft PS/2 3-to-3 cable Conversion Adapter SUN-31 SUN / iMAC USB to PS/2 adapter Others Video Input 12V / 24V / 48V DC Power Supply Rev. : 1.0 6.
RKP115 / RKP117 / RKP119 User Manual 7. Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. ● Unplug the LCD Keyboard Drawer from the power outlet before cleaning. ● Do not spray liquid cleaners or aerosol directly on the device. Wet a cloth with a neutral detergent (e.g. clean water) and squeeze it tight, then clean the screen slightly with it.
RKP115 / RKP117 / RKP119 User Manual 8. Structure Diagram 1. PS/2 keyboard 2. Aluminium front panel 3. Class A active matrix TFT LCD panel 4. Rear metal case 5. LCD inverter 6. LCD membrane 7. Ball bearing telescopic slides with stopper 8. Adjustable mounting bracket 9. Optional KVM switch • ‚ ƒ „ † Rev. : 1.0 ‰ ‡ P.
RKP115 / RKP117 / RKP119 User Manual LCD Session Rev. : 1.0 P.
RKP115 / RKP117 / RKP119 User Manual 10.
RKP115 / RKP117 / RKP119 User Manual 10. LCD Session Bright / Contrast 1. Brightness ● To perform brightness adjustment of the input RGB signal ● Use the Left & Right button to adjust and button to “Brightness” 2. Contrast ● To adjust the contrast level of the input signal ● Use the Left & Right button to adjust and button to “Contrast” Phase / Clock 1. Phase ● To adjust input video sampling clock’s phase ● Use the Left & Right button to adjust and button to “Phase” 2.
RKP115 / RKP117 / RKP119 User Manual 10. LCD Session MISC 1. Information ● ● ● The first header row shows the current resolution setup The second header row shows the horizontal frequency of the current input signal The third header row shows the vertical frequency of the current input signal 2. OSD Timer ● To modify the duration of the OSD time-out 3.
RKP115 / RKP117 / RKP119 User Manual 10. LCD Session Resolution Settings For Microsoft Windows Step 1 – Press right click on the desktop Step 2 – Choose “Properties” Step 3 – Change the “Screen Resolution” Step 4 – Change the “Screen refresh rate” Rev. : 1.0 P.
RKP115 / RKP117 / RKP119 User Manual 10. LCD Session Resolution Settings For SUN Servers ● ● ● ● ● ● ● ● Resolution configuration procedures should be run by qualified SUN server administrator Sun Servers are using resolution at 1152 x 900 x 76Hz. Supported resolution mode for 15” LCD: 1024 x 768 x 70/75Hz Supported resolution mode for 17” LCD: 1280 x 1024 x 75Hz You need to change the Sun Server resolution before you connect to LCD Display.
RKP115 / RKP117 / RKP119 User Manual KVM Session Rev. : 1.0 P.
RKP115 / RKP117 / RKP119 User Manual 11. KVM Session Rear View lk k o n m j Figure 11-1. Identifying IP KVM rear panel components Rear Panel Components Location Rev. : 1.0 Component j 8 or 16 PC Ports k Serial Port l RJ-45 LAN Port m Cascade Port n Virtual Media USB Port o DC Power Input P.
RKP115 / RKP117 / RKP119 User Manual 11. KVM Session Step 4. Connect the IP KVM to your Servers using the provided KVM cables* (Fig. 1) VGA HDDB-15-pin connector on KVM cable (Blue) PS/2 mouse connector on KVM cable (Green) PS/2 keyboard connector on KVM cable (Purple) Figure 11-4. PS/2 KVM Cable Server connectors PS/2 keyboard port of your server PS/2 mouse port of your server VGA HDDB 15-pin display output port of your server Step 5. Connect IP KVM to the network for remote control purpose.
RKP115 / RKP117 / RKP119 User Manual 11. KVM Session Cascading Using CA-6 PS/2 KVM cable to connect from Bank 1’s “Cascade port” to Bank 2’s “Console port”. After connected please press “Bank” & “Channel” button on the front of the PS/2 KVM switch to reset the PS/2 KVM switch. Bank 1 Figure 11-6. IP KVM Rear View Bank 2 Bank 8 (Max.) CA-6 PS/2 KVM cable Figure 11-7. PS/2 KVM Rear View CA-6 PS/2 KVM cable Figure 11-8. PS/2 KVM Rear View Cascade level Max. : 8 level Rev. : 1.0 ● Max.
RKP115 / RKP117 / RKP119 User Manual 11. KVM Session Remote Access the IP KVM Device Factory Default Information: IP Address : 192.168.1.22 Subnet mask: 255.255.255.0 Gateway : none Login name : super Passwords : pass Step 1. Open your java enabled browser, e.g.: Internet Explorer 6, Netscape, Mozilla, FirFox.. Step 2. Enter the IP address of the IP KVM in the address box. http://192.168.1.22 Enter Username “super” (Factory default) Enter Password “pass” (Factory default) Figure 11-9.
RKP115 / RKP117 / RKP119 User Manual 11. KVM Session IP KVM web base interface j k l m n o p q Figure 11-10. Main page of IP KVM IP KVM Configurations Location Function j KVM Console & Telnet Console setup k Virtual Media setup l Change Password and User management m User Console, Keyboard, mouse and Video settings n Network, Serial port, security, date, log view settings o Device Status, Firmware upgrade, Event log & Unit reset p Log off user and exit from IP KVM.
RKP115 / RKP117 / RKP119 User Manual 12. Start Up 1. The channels that have PC connected and it is switch on will have a green LED on that channel. 2. The red LED will indicate the selected channel. 3. 7 segments LED will display the bank number. 4. Press channel button to select the channel. 5. Enter the password, default is “00000000” eight zeros. 6. Otherwise the keyboard & mouse will be locked. 7. If you forget your password, send back to Manufacturer. HotKey Command Rev. : 1.
RKP115 / RKP117 / RKP119 User Manual 12. Start Up Hot-key Command Operation 1. Calling OSD Menu Scroll 2. Space Bar Scroll + £ + Switch to Next Power On Port (powered on PC only) Scroll 4. + Switch to Previous Port (powered on PC only) Scroll 3. Scroll + Scroll + ¤ + Switch to Previous Bank Scroll Scroll + First digit of Port Number: 0 for Port 0-9 1 for Port 10-16 Pg Up + Second digit of port Number 5. Switch to Specific Port Scroll Scroll + Bank 1~8 + No. 0 or 1 + No.
RKP115 / RKP117 / RKP119 User Manual 12. Start Up HotKey Command Operation 6. Switch to Next Bank Scroll 7. + Scroll + PgDn Enable / Disable beeper sound Scroll + Scroll B + Note: The default Beeper function is ON and beeper control is only for 8. Auto Scan for Powered on PC Scroll 9. + Scroll S + Reset to factory Default Setting Scroll + Scroll R + ROM REFLASH Note: Not available for password reset. 10.
RKP115 / RKP117 / RKP119 User Manual 12. Start Up OSD Structure Diagram Bank Session BANK : 1 BANK : 1 SYSTEM 01 01 01 03 SYSTEM 01 03 ® SYSTEM 03 05 03 ® SYSTEM 05 05 07 ® SYSTEM 05 07 02 ® SYSTEM 02 E SYSTEM0204 02 ®®SYSTEM 04 06 06 08 ® SYSTEM SYSTEM0406 PC Session SYSTEM 06 08 ® SYSTEM 07 ® SYSTEM 08 OSD SYSTEM : 1 0 SEC. 07 CHANGE08PASSWORD OSD : 1 0 SEC. CHANGE SCAN: CONSOLEPASSWORD ON/OFF KVM Settings Session SCAN: 1 0 SEC.
RKP115 / RKP117 / RKP119 User Manual 12. Start Up KVM Settings Session 1. OSD ● ● 2. ● It can be modified to 99 seconds for maximum. Choose “Change Password” in KVM Setting Session. ● Key-in the existing password. ● Enter the New Password. ● Re-Enter the New Password. ● Changing Password complete. ● The steps are shown as next picture: Console On/OFF ● ON – any user can use the console ● ● 5.
RKP115 / RKP117 / RKP119 User Manual 13. FAQ 1. Don’t press any keys on the keyboard while the selected computer is booting up. Otherwise, it might cause the keyboard error or keyboard is not detected at PC side. 2. The computer boot up fine, but keyboard doesn’t work. ● Make sure the keyboard works when directly plugged into the computer. ● Try a different keyboard, but use only 101, 102 or 104-key keyboard. 3. The Mouse is not detected during PC boot up.