CyberView User Manual RKP115 RKP117 1U Rackmount LCD monitor Keyboard drawer Version 1.
User Manual Table of Contents 1.0 General............................................................................................................ 3 1.1 Unit Introduction........................................................................................... 3 1.2 Unit Photograph............................................................................................ 3 1.3 Unit Features ................................................................................................ 3 1.
User Manual 1.0 1.1 General Unit Introduction Thank you for purchasing the 1U Rackmount LCD monitor Keyboard drawer. The unit offers space saving leading edge, flexible, features. 1.2 Unit Photograph 1.3 Unit Features • • • 1.
User Manual • • • 1.6 • • • • • • • • • Refer to section 5.0 of this user manual regarding recommended storage and operating conditions for the unit Refer to sections 6.0 of this user manual regarding troubleshooting of the unit Refer to section 7.0 of this user manual regarding improper use of the unit Preparation for Use Carefully remove the unit from its packaging Please check that the unit and its accessories match the packing contents in section 1.
User Manual 2. LCD On Screen Display 2.1 Display & Navigation Using Membrane Keys The On screen display built into the unit provides users with an efficient method of adjusting to the display input signal. This section explains clearly how to navigate the OSD using the membrane keys, shown below, that you will find on the unit to the right side of the LCD screen. 2.1.
User Manual 2.1.2 To Select a Menu Item Simply press the key to scroll 2.1.3 To Enter the Sub Menu Simply press the key marked 2.1.4 To Change an Input Value Simply use the key marked 2.1.5 To Save the setting Simply press the key marked 2.1.6 To Exit the Main Menu Simply use the key marked 2.2 2.2.1 Customizing the LCD Settings Brightness / Contrast To adjust brightness - follow steps 2.1.1 through 2.1.5 2.2.2 Auto Adjust To auto adjust - follow steps 2.1.1 through 2.1.
User Manual 2.2.3 Phase / Clock To optimize display qualities - follow the steps 2.1.1 through 2.1.5 2.2.4 Horizontal Screen Position To adjust horizontal screen position - follow the steps 2.1.1 through 2.1.5 2.2.5 Vertical Screen Position To adjust horizontal screen position - follow the steps 2.1.1 through 2.1.5 2.2.6 To reset to default factory setting To reset - follow the steps 2.1.1 through 2.1.5 3. Miscellaneous Sub Menu To select miscellaneous sub menu - follow the steps 2.1.
User Manual 3.1.1 Information To select information sub menu - follow the steps 2.1.1 through 2.1.5 3.1.2 OSD Timeout To select OSD Timeout sub menu - follow the steps 2.1.1 through 2.1.5 3.1.3 Color To select Color sub menu - follow the steps 2.1.1 through 2.1.5 www.austin-hughes.co.
User Manual 3.1.4 OSD language To select the OSD language sub menu - follow the steps 2.1.1 through 2.1.5 4. Setting OS Refresh Rate - Microsoft Windows® On the windows desktop ‘right click’ the mouse key and then select ‘properties’ Select ‘Settings’ from the tab menu Select ‘Monitor’ and then select a Screen refresh Rate of 75 Hertz – Press OK to save and exit www.austin-hughes.co.
User Manual 5. LCD Technical Specification LCD Video Size 15" Screen Area TFT Active Matrix Display Area 304.1mm (h) x 228.1mm (V) Contrast Ratio 300:1 Viewing Angle 130 deg (H) z 115 deg (V) TYP Resolution 1024 x 768 XGA Pixel Pitch 0.297mm (H) x 0.297mm (W) Response Time Tr = 5ms, TF = 20ms TYP Brightness 250 cd/m2 Panel Color 16.2M Colors Back Light 4 Lamps Synchronization Horizontal 48.36-60 KHz Range Vertical 56-75 Hz Input Signal Analog RGB 0.7Vp-p Power Management www.
User Manual LCD Video Size 17" Screen Area TFT Active Matrix Display Area 337:92mm (h) x 270.336mm (V) Contrast Ratio 350:1 Viewing Angle 150 deg (H) z 125 deg (V) TYP Resolution 1280 x 1024 SXGA Pixel Pitch 0.264mm (H) x 0.264mm (W) Response Time Tr = 5ms, TF = 20ms TYP Brightness 250 cd/m2 Panel Color 16.7M Colors Back Light 4 Lamps Synchronization Horizontal 31-69 KHz Range Vertical 56-75 Hz Input Signal Analog RGB 0.
User Manual 6. LCD Troubleshooting 6.1 The LCD does not function, the PC input is operational • Ensure that the Power adaptor is securely plugged in at both ends and has power feed from the supply source; check that the Green led light is on on the adaptor unit • Ensure the LCD is on by pressing the key • Ensure that the LCD is pulled out past the micro switch threshold 6.2 • 6.3 • 6.
User Manual 7. Warranty 7.1 Period & Conditions Warranty is from the date of sale of the unit, subject to the terms and conditions of the Austin Hughes Europe Authorised channel partner who supplied the unit, please refer to your authorised channel partner for terms & conditions 7.2 Manufacturers exclusions 7.2.1 Any Unit on which the Austin Hughes serial number has been defaced, modified or removed 7.2.
