SHORT GUIDE SILK Android
Thank you for choosing a Custom® product
BOX CONTENTS Remove the device from its carton being careful not to damage the packing material so that it may be re-used if the device is to be transported in the future. Make sure that all the components illustrated below are present and that there are no signs of damage. If there are, contact customer service. 1. Documentation (Short guide) 2. Device 3. Power supply cable 4.
DEVICE DESCRIPTION 1. ON/OFF key 5. USB 2.0 port (x5) 9. RJ48 port 2. Status LED 6. Serial DB9 port 10. Cash drawer port 3. Support 7. Reserved Debug port 11. MiniSD slot 4. Touch screen 8. Ethernet port 12. Jack audio port 13.
TURN THE DEVICE ON/OFF 1. Connect the power supply cable (included) to the device and the mains outlet use the type of electrical power supply indicated on the device label. 2. Turn the device on pressing the ON/OFF key. ATTENTION: In special conditions of use, it is recommended to mount ferrite on the power supply cable. 1 2 IN DC 12V 3.
STATUS MESSAGES Status LED STATUS LED DESCRIPTION ON DEVICE ON OFF DEVICE OFF 7
CONNECTIONS USB CASH DRAWER COM ETHERNET USB SERIAL USB
CLEANING 1. Disconnect the power supply cable and wait a few minutes to allow the screen to get to room temperature. 2. To clean the device use compressed air or a soft cloth. 3. Gently wipe the screen with a soft cloth slightly moistened with water. 1 2 3 Alcohol, solvent ON Alcohol, solvent ON H2O 5 min.
TECHNICAL SPECIFICATIONS DEVICE DIMENSIONS All the dimensions shows in following igures are in millimetres. GENERAL Processor RK3288 Quad-core A17 1.8 GHz Width 397.80 mm Length 204.50 mm Android 8.1 Height 330 mm 4.0 Weight 4150 g RAM memory 4 GB Flash memory 8 GB Operating system Bluetooth Wi-Fi 802.11 b/g/n 2.4G. Single Channels USB port (x5) reserved Debug port cash drawer RJ11 port RJ48 port Ethernet port serial DB9 port power supply port 12V DC Interfaces 45.30 mm 397.
TECHNICAL SERVICE 1. Find the product label located on the bottom of the device. The label shows the product code PC, serial number SN and hardware release HW. 2. Login to the site www.custom4u.it,and use the support tools.
CUSTOM S.p.A. Via Berettine 2/B 43010 Fontevivo (PARMA) - Italy Tel. : +39 0521-680111 Fax : +39 0521-610701 http: www.custom.biz Customer Service Department: www.custom4u.it © 2020 CUSTOM S.p.A. – Italy. All rights reserved. Total or partial reproduction of this manual in whatever form, whether by printed or electronic means, is forbidden. While guaranteeing that the information contained in it has been carefully checked, CUSTOM S.p.A.
FCC WARNING This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modiications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Rev. 1.10 Code : 0578200M000034 CUSTOM S.p.A. World Headquarters Via Berettine, 2/B - 43010 Fontevivo, Parma ITALY Tel. +39 0521 680111 - Fax +39 0521 610701 info@custom.biz - www.custom.biz All rights reserved www.custom.