Owner's Manual

ManualsBrandsCustom Dynamic ManualsElectronicsProGLOW LED Accent Light Bluetooth App Controller

Table Of Contents

空白页面

Custom Dynamics® ProGLOW™

Bluetooth Controller

Installation Instructions

Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST

01/2021

Package Contents:

- ProGLOW™ Controller (1)

- Power Harness with Switch (1)

- 3M Tape (5)

- Isopropyl Alcohol Wipe (1)

Part Numbers:

Warning: Disconnect negative battery cable from battery; refer to owner’s

manual. Failure to do so may result in electrical shock, injury, or fire. Secure

negative battery cable away from positive side of battery and all other posi-

tive voltage sources on vehicle.

Safety First: Always wear appropriate safety gear including safety glasses

when performing any electrical work. It is highly recommended that safety

glasses be worn throughout this installation process. Be sure vehicle is on

level surface, secure and cool.

Important: Controller should only be used with Custom Dynamics®

ProGLOW™ LED accent lights. This device and the LEDs used with it are

not compatible with other manufacture’s products.

Important: This unit is rated for a 3 amp load. Never use a fuse greater

than 3 amps in the in-line fuse holder, using a larger fuse or bypassing the

fuse will void warranty.

Important: Maximum LEDs per channel is 150 in series connection, not to

exceed 3 amps.

Note: Controller App is Compatible with iPhone 5 (IOS10.0) and newer

equipped with Bluetooth 4.0 and with Android Phones Versions 4.2 and

newer with Bluetooth 4.0. Apps available for download from the following

sources:

- Google Play: https://play.google.com/store/apps

- iTunes: https://itunes.apple.com/

Keyword Search: ProGLOW™

Important: Controller should be secured after installation in an area away

from heat, water, and any moving parts. We recommend the use of tie

wraps (sold separately) to secure wires from becoming cut, frayed, or

pinched. Custom Dynamics® is not liable for damage as a result of improp-

erly securing or failing to secure the controller.

ATTENTION

Please read all Information below before Installation

PG-BTBOX-1

We thank you for purchasing the Custom Dynamics® ProGLOW™ Bluetooth Controller. Our products utilize

the latest technology and high quality components to ensure you the most reliable service. We offer one of the

best warranty programs in the industry and we back our products with excellent customer support, if you have

questions before or during installation of this product please call Custom Dynamics® at 1(800) 382-1388.

Installation:

1. Connect the Red battery terminal of the Bluetooth Controller Pow-

er Harness and the Blue Battery Monitor wire from the controller to

the Positive terminal of the battery. Connect the Black battery ter-

minal of the Bluetooth Controller Power Harness to the Negative

battery terminal.

2. Check the switch on the Power Harness to confirm it is not illumi-

nated. If the switch on the Power Harness is illuminated, press the

switch button so the switch is not illuminated.

3. Plug the power harness into the ProGLOW™ Bluetooth Controller

power port.

4. (Optional Step) Connect the Black Brake Monitor wire on the Blue-

tooth Controller to the vehicle brake circuit to enable brake alert

mode. If not used, cap wire to prevent shorting. (Lights will change

to Solid Red when brake is engaged, then return to normal pro-

gram function when released.)

5. Refer to the diagram on Page 4 and Connect your ProGLOW™

LED accessories (Sold Separately) to the controller Channel ports

1-3.

6. Mount the ON/OFF switch on the Power Harness in a discrete

accessible location using the provided 3M tape. Clean the mount-

ing area and switch with the provided Isopropyl Alcohol Wipe and

allow to dry before applying the 3M tape.

7. Use the provided 3M tape to secure the ProGLOW™ Bluetooth

Controller in an area away from heat, water, and any moving

parts. Clean the mounting area and controller with the provided

Isopropyl Alcohol Wipe and allow to dry before applying the 3m

Tape.

8. Press the switch on the Power Harness, the LED Accessories

should now be illuminated and color cycling.

9. Download the ProGLOW™ Bluetooth App from either the Google

Play Store or the iPhone App Store depending on your smart

phone device.

Fits: Universal, 12VDC systems.

PG-BTBOX-1: ProGLOW™ 5v Bluetooth Controller

works with ProGLOW™ Color Changing LED Accent

Light Accessories only.

Summary of content (5 pages)

PAGE 1
Custom Dynamics® ProGLOW™ Bluetooth Controller Installation Instructions We thank you for purchasing the Custom Dynamics® ProGLOW™ Bluetooth Controller. Our products utilize the latest technology and high quality components to ensure you the most reliable service. We offer one of the best warranty programs in the industry and we back our products with excellent customer support, if you have questions before or during installation of this product please call Custom Dynamics® at 1(800) 382-1388.
PAGE 2
Installation Instructions - Page 2. 8. Open the ProGLOW™ app. When opening the app for the first time you will need to allow access to your phone. Select “OK” to allow access to your Media and Bluetooth. Refer to Photos 1 and 2. 12. When the App has found the controller, the controller will appear in the Controller List. Refer to Photo 6. 13. Tap the controller listed in the Controller List and the controller will pair with the phone.
PAGE 3
Installation Instructions - Page 3. ProGLOW™ Power Harness Connections ON/OFF Power Switch Power Harness with Switch BATTERY Blue 3A Fuse Channel 2 Output Channel 1 Output 3A Fuse Channel 3 Output DC Power Plug Black Optional: Connect black wire to vehicles 12vdc positive brake circuit for Brake Alert feature. If not used, cap wire to prevent shorting.
PAGE 4
Installation Instructions - Page 4. (2) End Cap L6 L6 [ [ [ C5 [ ( ) C4 L3 [ ( ) C3 L2 ( ) C5 ( ) C4 ( ) C3 ( ) C5 L1 ( ) C3 ( ) ( ) C2 C2 ( ) ( ) C6 C6 [ [ ( ) C1 [ C1 L2 C4 ( ) L1 ( ) L3 ( ) L1 C2 L C6 [ L1 [ L5 ( ) ( ) ( ) C1 C5 C5 L4 L4 L [ [ L ( ) ( ) C4 C4 L3 L3 [ [ ( ) ( ) C3 C3 L2 L2 [ [ ( ) ( ) Note: Look inside the cap to identify if it’s a Loop Cap or End Cap. Loop Caps will have pins inside, End Caps will be empty with no pins.
PAGE 5
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.