CD STEREO PORTABLE PLAYER MODEL: CD156 INSTRUCTION MANUAL Please read instructions carefully before use and retain for future reference.
LOCATION OF CONTROLS 1. 2. 3. 4. 5. 6. 7. SKIP / SEARCH DOWN BUTTON SKIP / SEARCH UP BUTTON MODE BUTTON PROG(PROGRAM) BUTTON LCD DISPLAY PLAY / PAUSE BUTTON (POWER ON) STOP BUTTON (POWER OFF) 8. VOLUME DN BUTTON 9. VOLUME UP BUTTON 10. OPEN BUTTON 11. PHONE JACK 12. DC JACK 13. BATTERY COMPARTMENT CAUTION USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
POWER SOURCES Using Battery 1. Open the lid of the battery compartment. 2. Insert 2 "AA" Size (UM-3) alkaline batteries by matching the (+ and -) to the diagram inside the battery compartment and close the lid. (batteries are not included) Note: For battery operation the AC power adaptor must be disconnected from DC IN Jack. (adaptor is not included) When to Change the Battery When the battery is used up, " " indicator flashes in the display. Replace all the batteries with new alkaline batteries.
General Operation Play/Pause Button f Stop Button Skip / Search Button - Press once to start playback in the original order. Press again to stop the disc play temporarily. - Press once to stop playback. Press again to turn off power. - Press once to skip to next track or back to previous track. Press continuously to search forward or backward . Automatic Turn off (Auto Power Off) If the player in STOP mode for 30 seconds, it will turn off automatically.
- Press the PLAY button, all the tracks on a disc to be played in a random sequence. NOTE - To cancel RANDOM PLAY simply press MODE button one time until the RONDOM indicator disappears. Program Play 1. During stop, press PROG button until " PROG " and track number flashes in Display. 2. Press or SKIP/SEARCH button to choose a track. 3. Press PROG button to program the track, up to 20 tracks can be programmed into memory. 4. Repeat steps 2 and 3 to program tracks to start the program payback. 5.
GENERAL INFORMATION Troubleshooting Guide SYMPTOM CAUSE CD Player will not turn on - Dead or weak batteries - AC adaptor not connected properly Disc will not play - Disc inserted incorrectly No sound from earphones - Earphone plug not inserted properly - Volume control set to minimum - Weak batteries Sound is skipping - Defective compact disc - The compact disc or pickup lens is dirty - Strong vibrations SOLUTION - Replace batteries - Check AC adaptor connection - Reinsert disc with label side fac
