Installation Guide

CURTMFG.COM
•
PRODUCT SUPPORT: 877.287.8634
•
15927-INS-RA
•
05/08/2020
•
ECN7017
•
PAGE 1
Product Registration and Warranty
CURT stands behind our products with industry-leading warranties. To get copies of the product
warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys
INSTALLATION MANUAL
15927
Level of Difficulty
Difficult
Installation difficulty levels are based on time
and effort involved and may vary depending on
the installer level of expertise, condition of the
vehicle and proper tools and equipment.
SAFETY INSTRUCTIONS
Safety glasses should be worn at all times while installing this product.
NOTICE
Visit www.curtmfg.com for a full-color copy of this
instruction manual, as well as helpful videos, guides and much more!
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
This installation requires welding. It is recommended
to have two or three people during the install.
Periodic inspection of the trailer hitch should be performed to ensure all
mounting hardware remains tight and structural components are secure.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
WARNING
Never exceed the vehicle manufacturer's recommended towing capacity.
If metal surfaces are not completely bare, the weld
will not be the required strength and may void warranty.
Parts List
Item Qty Description
1 1 Hitch center section, 44"
2 1 Side plate,
driver-side, 9" drop
3 1 Side plate,
passenger-side, 9" drop
Product Photo
Weight Carrying Capacity
Gross trailer weight (GTW) 16,000 lbs.
Tongue weight (TW) 1,600 lbs.
Rated up to 16,000 lbs. GTW when
installing side plates mounted at a width
of 42" or narrower and a drop of 9" or less