Quick Start Guide

HOW TO ASSEMBLE THE BREAD PAN
Compact Automatic Bread Maker
BEFORE THE FIRST USE
Wash and dry bread pan and kneading paddle.
Note: Do not use metal utensils in bread pan as they may ruin the non-stick surface.
CAUTION! Falling Object Hazard. Bread maker can wobble and walk during kneading cycle. Always
position it in the center of counter away from the edge.
1. Check for any missing or damaged parts.
2. Clean all the parts according to “CLEANING AND MAINTENANCE”.
3. Set the bread maker on bake mode and let it run on empty for about 10 minutes. Once you let it cool,
clean all the detached parts again. The appliance may emit a little smoke and/or odor when you turn
it on after the first time. This is normal, and it will subside after the first or second use. Make sure the
appliance has sufficient ventilation.
4. Once you dry all parts thoroughly and assemble them, the appliance is ready for use.
1. To use the bread pan handle, turn the bread pan counter-clockwise,
then pull it out of the device.
2. Place the bread pan back into the bread maker. Ensure the pan is firmly locked into place by
turning it clockwise. Then, close the lid.
CAUTION : Be careful as the product may be hot.
3. Push the kneading paddle onto the drive shaft inside the bread pan.
퀵가이드-김상엽148X210_2017.qxp_레이아웃 1 2020. 12. 29. 오후 4:46 페이지 1

Summary of content (2 pages)