5300-10009 User Manual User Manual V1.
Table of Contents 1.0. INTRODUCTION ................................................................................................................................ 3 2.0. POWERING UP .................................................................................................................................. 3 3.0. MAIN FUNCTIONS ............................................................................................................................. 4 3.4. 3.5. 3.6. 3.7. 3.8. 3.9. 3.10. 3.11.
1.0. Introduction Advanced Card Systems Limited developed this ACR310/312 Mobile Validator for a dedicated customer Cubic Transport Systems Inc. This document describes the basic operation of ACR310/312 Mobile Validator. This Mobile Validator is a smart payment terminal which can read/write different type of smartcards. Different connectivities are provided, e.g. Wi-Fi, Bluetooth, Ethernet, GPRS/WCDMA, USB, RS485, etc., for connecting with server or other devices.
A optional rechargeable battery can be inserted at the back. It acts as a backup battery when the external power is suddenly removed. So, the application software can perform some clearing tasks before going to sleep mode. 3.0. Main Functions 3.4. Smartcard reader The Mobile Validator is with a 13.56MHz smartcard reader built-in. The demo application software running at startup read cards continuously.
USB hub, etc) can be connected to the mobile validator via this port. For standard HID device (e.g. mouse) or mass storage device (e.g. USB drive), no driver is needed. 3.8. USB Client The USB client port is compliant with USB 2.0 high speed. The mobile validator can connect to a host (e.g. PC) via this port. This port is intended for application development and debugging but not for actual application. PC will recognize the mobile validator as a windows mobile device.
5 RS485 D- 6 GND 3.12. GPS The mobile validator has a build-in GPS receiver with integrated antenna. The GPS is enabled when the COM5 is opened by an application. In the MicroSD card, the tools “GPSInfo” and “putty” can be used to open the COM5 and hence enabling the GPS. 3.13. Audio The mobile validator has a speaker to generate music/sound/tone. 3.14. SAM card slots The mobile validator has 4 SAM slots under the rechargeable battery. The card should be inserted before powering up the device. 3.15.
4.0. FCC/ISEDC Caution FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.