5300-10009 User Manual User Manual V1.
Table of Contents 1.0. INTRODUCTION ................................................................................................................................ 3 2.0. POWERING UP .................................................................................................................................. 3 3.0. MAIN FUNCTIONS ............................................................................................................................. 4 3.4. 3.5. 3.6. 3.7. 3.8. 3.9. 3.10. 3.11.
1.0. Introduction Advanced Card Systems Limited developed this ACR310/312 Mobile Validator for a dedicated customer Cubic Transport Systems Inc. This document describes the basic operation of ACR310/312 Mobile Validator. This Mobile Validator is a smart payment terminal which can read/write different type of smartcards. Different connectivities are provided, e.g. Wi-Fi, Bluetooth, Ethernet, GPRS/WCDMA, USB, RS485, etc., for connecting with server or other devices.
A optional rechargeable battery can be inserted at the back. It acts as a backup battery when the external power is suddenly removed. So, the application software can perform some clearing tasks before going to sleep mode. 3.0. Main Functions 3.4. Smartcard reader The Mobile Validator is with a 13.56MHz smartcard reader built-in. The demo application software running at startup read cards continuously.
PC will recognize the mobile validator as a windows mobile device. It can access the mobile validator via ActiveSync. 3.9. Ethernet An Ethernet port is provided for connecting to network via RJ45 cable. By default, it uses dynamic IP address. So, when you connect the mobile validator to a network with DHCP server, it should be able to get the IP address automatically. Cable can be plugged to the mobile validator before or after booting up. 3.10.
3.12. GPS The mobile validator has a build-in GPS receiver with integrated antenna. The GPS is enabled when the COM5 is opened by an application. In the MicroSD card, the tools “GPSInfo” and “putty” can be used to open the COM5 and hence enabling the GPS. 3.13. Audio The mobile validator has a speaker to generate music/sound/tone. 3.14. SAM card slots The mobile validator has 4 SAM slots under the rechargeable battery. The card should be inserted before powering up the device. 3.15.
4.0. FCC/ISEDC Caution FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.