User's Manual

COM5000-8 POWER
AMPLIFIER
THE COM5000-8 IS A HIGH-EFFICIENCY CLASS AB
AMPLIFIER WITH THE LINEARITY OF A CLASS A DESIGN.
This amplifier is based on Silicon Power DMOS transistors that are specified for
continuous operation (CW) at maximum rated power. The COM5000 is modular in
design using basic building blocks in its four power amplifiers of 1.25 kW each. The
output of each power amplifier passes through a selectable multiband low pass filter
which is then summed by the output combiner.
The amplifier incorporates a sophisticated microprocessor based controller which is
used for normal “housekeeping” functions. The built-in T-4180 Exciter has RS-232
and RS-422 interfaces for connection to an external computer for remote control.
Built-In Test (BIT) routines continuously monitor conditions within the amplifier and
transmit status information upon request.
The COM5000-8 has a built-in exciter (Cubic T-4180) and is FCC Part 87 certified.
www.cubic.com
Enabling a Safer World
Modular Design
5,000 Watts PEP and Average
2.0 to 30 MHz
Automatic Level Control (ALC)
Operates into VSWRs up to
3:1 with graceful power reduction
VSWR Protection above 3:1
Multiband Low Pass Filters
RS-232/422/485 Interfaces
Built-in T-4180 Exciter
FCC Part 87 Certified
Front Panel Forward and
Reflected Power Meters

Summary of content (2 pages)