FCC Thr NVSCOEX-10UY Attachment C3: CT-1000 System TECHNICAL MANUAL OPERATION AND MAINTENANCE INSTRUCTIONS OPERATIONAL LEVEL POWER SUPPLY, 28V DC PS-7130A-1 (160 264V AC SINGLE-PHASE INPUT) (FCC VERSION) © Cubic Communications, Inc. 9535 Wales St rest San Diego, California 92121-2953 Telephone: (519) 843-5800 Teletext: (619) 643-5803 Manual Part No.
CUBIC. COMMUNICATIONS PS-7130A-1 TECHNICAL MANUAL A mambas of the Cubs Corporation family of companies FOREWORD SCOPE This manual contains information for the installer and operator to obtain best performance from the PS-7130A-1. The information includes: a general description, preparation for use and installation instructions, operating instructions, general theory of operation, maintenance instructions, preparation for reshipment, and parts fist. Component level maintenance is not included in this manual.
@ CUBIC.COMMUNICATIONS PS-T130A-1 TECHNICAL MANUAL A amber of the Custer Corporation fame of companies TABLE OF CONTENTS Chapter [2 1 GENERAL DESCRIPTION At 1-1 INTRODUCTION. C11 1-2 EQUIPMENT DESCRIPTION EQUIPMENT SUPPLIED AND REQUIRED . Ll 1-4 STORAGE DATA oo 1-1 1-5 TOOLS AND TEST EQUIPMENT CL 1-6 SAFETY PRECAUTIONS 1-1 2 PREPARATION FOR USE AND INSTALLATION INSTRUCTIONS o. L210 2-1 INTRODUCTION. . 2-1 2-2 UNPACKING AND INSPECTION . 2-1 2-3 INSTALLATION L 22 2-4 CONNECTIONS .
®CUBIC. COMMUNICATIONS PS-7130A-1 CARNIVAL MANUAL A mariachi of tha Cubic: Corporation verity of companies FIL Figure Age 1-1 PS-7130A-1 Front View .. 1-2 2-1 PS-7130A-1 Rear Panel PS-7130A-1 Controls and Indicators . 32 4-1 PS-7130A-1 Block Diagram . 42 FEW-1 PS-7130A-10utline and Mounting Drawing . PF-1 FEW-2 PS-7130A-1 Interconnect Diagram x) FEW-3 PS-7130A-1 Interconnect Diagram .. PF-5 FEW-4 PS-7130A-1 Parts Locator Diagram .
CUBIC. COMMUNICATIONS PS-7130A-1 TECHNICAL MANUAL CHAPTER 1 GENERAL DESCRIPTION 1-1 INTRODUCTION. This chapter contains a description of the equipment supplied, equipment required but not supplied, storage data, and recommended tools and test equipment. 1-2 EQUIPMENT DESCRIPTION. The PS-7130A-1 power supply (figure 1-1) supplies four independent regulated +28V DC voltages at 30 amperes and one +28V DC voltage at 11 amperes using 160 to 264 volts, 50/60 Hz, single phase AC input power.
@cubic. COMMUNICATIONS A arm bar af the Gable Corporation family of companies PS-T130A-1 TECHNICAL MANUAL Table 1-1 PS-7130A Specifications. Item Specification ELECTRICAL REQUIREMENTS Input Voltage 160 264V AC (RMS) (220V AC typical) Frequency Range 50/60 Hz Input Current 30 Amperes maximum Power Consumption 3,400 Waits maximum | Output Voltage Output Current ENVIRONMENTAL Ambient Temperature 0 to +50°C +28VDC nominal (5 ea.) 30 amperes max. (each of 4 outputs), [1 amperes max.
@cubic. COMMUNICATIONS PS-7130A-1 TECHNICAL MANUAL A member of ihe Cutie Corporation amity of companies CHAPTER 2 PREPARATION FOR USE AND INSTALLATION INSTRUCTIONS 2-1 INTRODUCTION. This chapter contains unpacking, inspection, installation, connections, and initial alignment procedures for the power supply. 2-2 UNPACKING AND INSPECTION. To unpack and inspect the power supply for damage, perform the following procedures: 1. Inspect the shipping carton for damage before unpacking the power supply.
@music. COMMUNICATIONS PS-7130A-1 TECHNICAL MANUAL A member of ine Cable Corporation timely of companies 2-3 INSTALLATION. The power supply is designed for rack slide mounting in a relatively dust free environment with an ambient temperature range between 0 and +50°C. CAUTION Ensure slide mounting screws are of the proper length. If screws are too long internal equipment may be damaged. NOTE See figure FEW-1 for clearance requirements and mounting details.
CUBIC. COMMUNICATIONS PS-7130A-1 TECHNICAL MANUAL A ma miser of tre Cub Corporation amity of companies Table 2.2 DC POWER Connector {J1} Pin Descriptions. Remarks PS1 Output, 30 Amps PS1 Output PS2 Quip, 30 Amps PS2 Output PS3 Output, 30 Amps P53 Output PS4 Output, 30 Amps PS4 Output AUX Output, 11 Amps AUX Output Table 2-3 AC POWER Connector {J2) Pin Descriptions.
@Telecommunications A member of tha Cubic Corporation eerily of compensates Table 2-4 SIGNAL (J3) Pin Descriptions.
@ TELECOMMUNICATIONS PS-7T130A-1 TECHNICAL MANUAL CHAPTER 3 OPERATING INSTRUCTIONS 3-1 INTRODUCTION. This chapter contains PS-7130A-1 power supply operating instructions. 3-2 OPERATION. Operation is performed using the front panel controls and indicators. (See figure 3-1.) Table 3-1 lists the front panel controls and indicators and their functions. To turn on, and initially set-up the PS-7130A-1, perform the following procedures: 1. Set the front panel switch/circuit breaker on (up).
@S Cubic. COMMUNICATIONS PS-7130A-1 TECHNICAL MANUAL CHAPTER 4 GENERAL THEORY OF OPERATION 4-1 INTRODUCTION. This chapter describes the PS-7130A-1 theory of operation (see figure F0-2). 4-2 OVERALL THEORY. When the front panel power switch/circuit breaker (S1} is set on, AC power is applied from the rear panel connector (J2) to the four power supply modules through an AC line filter. The AC line filter keeps internally generated power supply switching noise off the AC input line.
$ CUBIC. COMMUNICATIONS PS.7130A-1 TECHNICAL MANUAL. CHAPTER 5 MAINTENANCE INSTRUCTIONS Section I. PREVENTIVE MAINTENANCE 5-1 INTRODUCTION. This chapter contains both preventive and corrective operational level maintenance instructions. The information includes cleaning and lubrication, inspection, performance verification, troubleshooting, and module replacement, 5-2 CLEANING AND LUBRICATION.
CUBIC. COMMUNICATIONS PS-7130A-1 TECHNICAL MANUAL A member ot tne Cutie Com oration family of commons Section Il. CORRECTIVE MAINTENANCE 5-5 TROUBLESHOOTING. §-5.1 Troubleshooting Philosophy. Certain assumptions are made concerning the troubleshooting approach as applied to the unit as follows: 1. All point-to-point wiring is correct. Therefore, no malfunction is the result of a wiring (or cable connector) fault.
CUBIC. COMMUNICATIONS PS-7130A-1 TECHNICAL MANUAL X member of the Curdle Corporation (amity of companion Qne PS Status LED Off. 1f a PS status lamp remains off after power-up, the fault is usually in the indicated Power Supply module. Remove and replace the Power Supply module with one from another slot to confirm the faulty module. Multiple PS Status LED Off. If all or multiple PS status LED are off, check for low line input voltage. No PS Status LED Off.
® CUBIC. COMMUNICATIONS PS-7130A-1 TECHNICAL MANUAL 4 member of the Curie Corporation family of compares 4. Some voltages may be checked on the rear panel connectors. Refer to Chapter 2 for pin-outs of these connectors. Some voltages may be checked by removing the module where the signal in question terminates, and checking the voltage at the connector in the chassis.
[2] CUBIC. COMMUNICATIONS PS-7130A-1 TECHNICAL MANUAL A meme; of te Cubic Corporation family of compares CHAPTER 6 PREPARATION FOR RESHIPMENT 8-1 INTRODUCTION. This chapter contains information to prepare the equipment for reshipment including disassembly and removal from the rack mount, packaging, and shipping. 6-2 DISASSEMBLY AND REMOVAL. To disassemble and remove the PS-7130A-1 from the rack mount, perform the following procedures: oR . Ensure the front panel switch/circuit breaker is set off (down.
© CUBIC. COMMUNICATIONS PS-7130A-1 TECHNICAL MANUAL CHAPTER 7 STORAGE 7-1 INTRODUCTION. This chapter contains information for storage of the equipment including environmental conditions and any special preservation requirements. 7-2 STORAGE ENVIRONMENT. The power supply should be stored indoors in the original shipping container (or similar container) as described in Chapter 6. The environment should be dry with a temperature range between -40 and +75°C.
TELECOMMUNICATIONS PS-7130A-1 TECHNICAL MANUAL CHAPTER 8 PARTS LIST 8-1 INTRODUCTION. This chapter contains the parts fist for replaceable parts at the operational maintenance level. 8-2 REPLACEABLE PARTS LISTING. Table 8-1 lists the replaceable parts for the unit. (See figure FEW-4 for locations.) Table 8-1 Replaceable Parts List. Qty Description Part Number Mfr! 4 Power Supply Module 2241-1104-1 CCl 1 Filler Panel, Front 2242-4412-1 CCI 1 Filler Panel, Rear 2242-4413-7 CCI ‘Cubic Communications Inc.
DOUBTING. COMMUNICATIONS PS-7130A-1 TECHNICAL MANUAL Are Ca mere oe ee, FRONT PANEL t sop TRL Low A RH ic ern wm] orp be wi Lang FILTER tow THEIRS. mi 0 uw Lar ton Ca be Ton ac Ever sour or: Eo nem ¥ DC OUTPUT ES R505) ios FD3. PS-71304+1 interconnect Diagram.
FCC ID: dVSCTX-1000 Attachment C2: CT-1000 System TECHNICAL MANUAL OPERATION AND MAINTENANCE INSTRUCTIONS OPERATIONAL LEVEL POWER AMPLIFIER, 1KW MF HF PA-5050A (FCC VERSION) @® Cubic Communications, Inc. 9535 Wales Street San Siege, California 92121-2953 Telephone: (619) 843-5800 Teletext: (619) 643-5803 Manual Part No.
CUBIC.
Subsonic. COMMUNICATIONS PA-5050A TECHNICAL MANUAL A member of the Cubic Cooperation family of companies FOREWORD SCOPE This manual contains information for the installer and operator to obtain best performance from the PA-5050A. The information includes; a general description, preparation for use and installation instructions, operating instructions, general theory of operation, maintenance instructions, preparation for reshipment, and parts list. Component level maintenance is not included in this manual.
@ CUBIC. COMMUNICATIONS PA-5050A TECHNICAL MANUAL A macrame of he Cubic Corporation family of companies fn age 1 GENERAL DESCRIPTION LL. oii eae IEEE cmv air ies 1-1 1-1 INTRODUCTION. 1-2 EQUIPMENT DESCRIPTION . 1-3 EQUIPMENT FURNISHED . 1-4 STORAGE DATA 1-5 TOOLS AND TEST EQUIPMENT 1-6 SAFETY PRECAUTIONS .. 2 PREPARATION FOR USE AND INSTALLATION INSTRUCTIONS 2-1 2-1 INTRODUCTION. 2-2 UNPACKING AND INSPECTION | 2-3 INSTALLATION 2-4 CONNECTIONS 2-5 INITIAL ALIGNMENT PROCEDURES .. 3 OPERATING INSTRUCTIONS ..
H CUBIC. COMMUNICATIONS PA-5050A TECHNICAL MANUAL A member af the Cubic Corporation family of companies TA F Chapter [9 6 PREPARATION FOR RESHIPMENT 6-1 INTRODUCTION. 6-2 DISASSEMBLY AND REMOVAL . 6-3 PACKAGING .. 6-4 SHIPPING STORAGE oo ia earn naan aaa 7-1 7-1 INTRODUCTION 7-2 STORAGE ENVIRONMENT . . 7-3 PRESERVATION PARTS LIST ooo eee eerie eas 8-1 8-1 INTRODUCTION 82 REPLACEABLE PARTS LISTING APPENDIX A: REMOTE CONTROL CABLE A-1 INTRODUCTION .
@Cubic. COMMUNICATIONS PA-5050A TECHNICAL MANUAL A member of the Cubic Corporation taffy of companies Tabla LIST OF ILLUSTRATIONS Pays PA-5050A Front View .. .12 PA-5050A Rear Panel .. 23 PA-5050A Front Panel Controls and Indicators . 3-2 PA-5050A Outline and Mounting Drawing... PA-5050A Block Diagram PA-5050A Interconnect Diagram .. PA-5050A Replaceable Parts Locator Diagram « FP7 LIST OF TABLES Pan PA-5050A Specifications 1-3 elms Furnished and Required .
CUBIC, COMMUNICATIONS PA-5050A TECHNICAL MANUAL A member af the Cubic Corporation family of ceremonials 1-1 1-2 1-3 CHAPTER 1 GENERAL DESCRIPTION INTRODUCTION. This chapter contains a description of the equipment supplied, equipment required but not supplied, storage data, and recommended tools and test equipment. EQUIPMENT DESCRIPTION. The PA-5050A linear power amplifier (figure 1-1) is a solid state unit that provides 1 kilowatt power amplification of RF signals between 1.6 and 30 MHz.
@CUBIC. COMMUNICATIONS 2 mamba of he Cubic Corporation family of companies PA-5050A TECHNICAL MANUAL Figure 1-1 PA-5050A Front View.
@URIC. COMMUNICATIONS PA-5050A TECHNICAL MANUAL A manta of the Cute Preparation Tensity af Companies Table 1-1 PA-5050A Specifications. item ELECTRICAL REQUIREMENTS Frequency Range Specification 1.6 30.0 MHz Power Output 1 kW peak. (900 w from MHz 30 MHz) Rated for 100% continuous duty SSB, CW, AM, or FSK. Drive Level 20 to 100 milliliters input for 1000 watts output. Inter modulation Distortion (dB below I kW PEP) 3rd order 32 dB, 5th order 37 dB typical. Filter Bands (in MHz) Band@ 1.60231 Band 6.
@CUBIC.COMMUNICATIONS A member of the Cubic Com oration Jami of Companies Table 1-2 Items Furnished and Required. PA-5050A TECHNICAL MANUAL Part No. Qty Nomenclature 2241-1000-3 01 PA-S050A Power Amplifier (FCC LD. # CONVICTS-1000) Furnished 2241-1021-3 01 Technical Manual, Operation and Maintenance Furnished Instructions, POWER AMPLIFIER, PA-5050A 2242-1000-1 01 Cubic PS-TI130A. Furnished (Four independent Power Sources @ +28VDC 10%, 25 amperes., and one source @ +28VDC 10%, 11 amperes.
CUBIC. COMMUNICATIONS PA-5050A TECHNICAL MANUAL A mamba of te Cubic Corporation family of companies 241 2-3 CHAPTER 2 PREPARATION FOR USE AND INSTALLATION INSTRUCTIONS INTRODUCTION. This chapter contains unpacking, inspection, installation, connections, and initial alignment procedures for the PA-5050A. UNPACKING AND INSPECTION. To unpack and inspect the PA-5050A for damage, perform the following procedures: 1. Inspect the shipping carton for damage before unpacking the PA-5050.
CUBIC. COMMUNICATIONS PA-5050A TECHNICAL MANUAL A mamba at the Cubic Corporation family of companies 24 NOTE See figure FEW-1 for clearance requirements and mounting details, I. Securely mount the outer section of the slides to the rack cabinet being sure to select the correct mounting holes. 2. Attach indicated right and left slide rails to each side of unit. 3.
CUBIC. COMMUNICATIONS PA-5050A TECHNICAL MANUAL A amber of the Cubic Corporation family of companies Table 2-2 DC POWER (J3) Pin Descriptions.
@® CUBIC. COMMUNICATIONS A member of the Ruble Corporation tatami of companion Table 2-3 SIGNAL (J4) Pin Descriptions.
® CUBIC. COMMUNICATIONS PA-5050A TECHNICAL MANUAL & member of ta Cub lo Corporation family of companies Table 2-4 REMOTE CONTROL (JS) Pin Descriptions.
@cubic. COMMUNICATIONS PA-5050A TECHNICAL MANUAL 4 member af inw Cubic Corporation family of compares. 2-5 INITIAL ALIGNMENT PROCEDURES. NOTE This procedure is used only when the system is turned on for the first time or when the T-4180 exciter is changed. Setting PAP Manually: 1. 1f the PS-7130A and the PA-50504 are on, turn them off. 2. Press the button on the PA-5050A and hold down while turning on the PS-7130A. 3. The LED readout will display “TURN OFF TO ABORT". Release the button.
TELECOMMUNICATIONS PA-5050A TECHNICAL MANUAL CHAPTER 3 OPERATING INSTRUCTIONS 3-1 INTRODUCTION. This chapter contains operating instructions for the PA-5050A linear power amplifier. A separate power supply source, neurotransmitter, and antenna system are required. Refer to the documentation supplied with the power supply, transmitter/exciter, and antenna system for operation of that equipment. 3-2 OPERATION. Operation is performed using the front panel controls and indicators. (See figure 3-1.
@ CUBIC. COMMUNICATIONS PA-5050A TECHNICAL MANUAL. Member! ihe Cube Corporation family of companies Table 3-2 PA-5050A Serial Bus Command and Status Messages. Syntax Reply Description | Command Messages PAF12345678 —— Set operating frequency in Hz. Range 1.6 30 MHz. This will select the appropriate low pass filter. PAP# —Set the power output. Valid ranges are 1=100W, 2=500W, 3=1KW below 28 MHZ & 900W at 28 MHZ and above 1 Software Turkey. 1=TX, 0=RX Set front end attenuation value 00.00 to 32.00 dB, (XX.
@ CUBIC. COMMUNICATIONS PA-5050A TECHNICAL MANUAL 4 member of the Cubic Corporation family of compares 441 4-2 CHAPTER 4 GENERAL THEORY OF OPERATION INTRODUCTION. This chapter contains a block diagram description of the PA-5050A linear power amplifier. The following paragraphs describe operation of the PA-5050A (see figure FO-2). GENERAL THEORY OF OPERATION. 4-2.1 Power Distribution. Power is applied to the rear panel of the unit on connector Ji.
© CUBIC.COMMUNICATIONS PA-5050A TECHNICAL MANUAL A member o the Cubic Corporation family of comedian 4-2.3 Display. The Display board contains a liquid crystal alphanumeric display that provides an indication of forward power, reflected power, attenuation and frequency. When the front panel DISPLAY STATUS switch is pressed, the display shows the alternate information. 4-2.
# CUBIC. COMMUNICATIONS PA-5050A TECHNICAL MANUAL A lumbar of the Cutie: Preparation family of companies to the RF input of the PA-5050A. This reduction of drive to the PA modules causes the temperature to drop. When the PA module cools down sufficiently, the thermostat switch closes. The PWR LED lights, and normal drive is restored. Each PA module has a VOLTAGE SENSE line that is sent to the individual external power supplies.
@cubic. COMMUNICATIONS PA-5050A TECHNICAL MANUAL A member of tre Cubic Corporation amy of companies 5-1 5-4 CHAPTER 5 MAINTENANCE INSTRUCTIONS Section |. PREVENTIVE MAINTENANCE INTRODUCTION. This chapter contains both preventive and corrective operational level maintenance instructions. The information includes cleaning and lubrication, inspection, performance verification, troubleshooting, and module replacement. CLEANING AND LUBRICATION.
® CUBIC, COMMUNICATIONS PA-5050A TECHNICAL MANUAL A amber of the Cubic Corporation fem of companies 5-5 Section i. CORRECTIVE MAINTENANCE TROUBLESHOOTING. 5-51 Troubleshooting Philosophy. Certain assumptions are made concerning the troubleshooting approach as applied to the unit as follows: 1. All point-to-point wiring is correct. Therefore, no malfunction is the result of a wiring (or cable connector) fault.
CUBIC. COMMUNICATIONS PA-5050A TECHNICAL MANUAL A member of the Cubic Corporation teddy of campaniles Table §-1 Front Panel LED interpretation. Condition Corrective Action ON ON OFF Normal None ON OFF OFF 1. Overheat 1 Turnkey and wait § mind. Check cooling fans Check ambient temperature Replace PA module Replace PA-5050A 2. Loss of input voltage to 2. Check input voltage to module module Replace PA module Replace PA-5050A ON OFF ON Overheat and low RF power out | Turnkey and wait 5 mind.
CUBIC.COMMUNICATIONS PA-5050A TECHNICAL MANUAL A member of tre Cubic Corporation family of companies 5-5.3 Module Replacement. ‘Turn off power before removing or replacing modules. Equipment may be damaged if modules are removed or replaced with power applied. To remove and replace a PA module, perform the following procedures: Removal. 1. Turn the knurled knobs on the top and boom of the PA module counter-clockwise to release the module from the chassis. 2. Slide the module out of the chassis. Replacement.
music. COMMUNICATIONS PA-5050A TECHNICAL MANUAL A member of the Cubic Corporation family of companies There are two methods to calibrate 3 PARASOL after the calibration values are erased: 1 Attach a T4150/80 to the RF in and control connectors. Set PA POW to 100 Watts using the soft keys on the T4180/50. Key the transmitter.
$ CUBIC. COMMUNICATIONS PA-5080A TECHNICAL MANUAL Iambi of ihe Cu Consecrations family of camp arise 4. Some voltages may be checked on the rear panel connectors. Refer to chapter 2 for pin-outs of these connectors. Some voltages may be checked by removing the module where the signal in question terminates, and checking the voltage at the connector in the chassis. Remove the +28V DC input voltages before performing continuity checks.
© CUBIC. COMMUNICATIONS PA-5050A TECHNICAL MANUAL A ember of tbe Cubic Corporation lam of companies 6-1 6-3 6-4 CHAPTER 6 PREPARATION FOR RESHIPMENT INTRODUCTION. This chapter contains information to prepare the equipment for reshipment including disassembly and removal from the rack mount, packaging, and shipping. DISASSEMBLY AND REMOVAL. To disassemble and remove the PA-5050A from the rack mount, perform the following procedures: Remove power from the PA-5050A.
@PUBIC, COMMUNICATIONS PA-5050A TECHNICAL MANUAL Mare af oa Gobi Palmerston tummy of companies CHAPTER 7 STORAGE 7-1 INTRODUCTION. This chapter contains information for storage of the equipment including environmental conditions and any special preservation requirements, 7-2 STORAGE ENVIRONMENT. The PA-S050A should be stored indoors in the original shipping container (or similar container) as described in Chapter 6. The environment should be dry with a temperature range between -40 and +75 °C.
@ CUBIC. COMMUNICATIONS PA-5050A TECHNICAL MANUAL A mamba of the Cubic Corporation family of companies CHAPTER 8 PARTS LIST 8-1 INTRODUCTION. This chapter contains the parts list for replaceable parts at the operational maintenance level. 8.2 REPLACEABLE PARTS LISTING. Table 8-1 lists the replaceable parts for the unit. (See figure FEW-4 for locations.) Tabla 8-1 Replaceable Parts List. Description Part Number Power Amplifier Module !Cubic Communications Inc.
Calculi. COMMUNICATIONS PA-5050A TECHNICAL MANUAL 4 member of the Cubic Corporation fame of competitors APPENDIX A REMOTE CONTROL CABLE \-1 INTRODUCTION. This appendix contains a description of the remote control cable connecting the PA-5050A to the T4150/80 exciter. \-2 DRAWING. Figure A-1 shows the schematic of the remote control cable CCI P/N 2241-5023-X.
MERCURIC, COMMUNICATIONS arc be cats epee AT ott. cent GALAPAGOS TECHNICAL MANUAL FEW. PA-80504 interconnect Diagram.
CUBIC, COMMUNICATIONS PARASOL TECHNICAL MANUAL Nem tat corona Aly snot ren “80 560 Bo 0830 1 ) sacks oon L \ POWER: AUP MODULE Dee FATE ew A PAE THN SCANS DN OVER” AME NODULE TH THE Eka uP FORESTATION HONK SOON 10 STALENESS I SASS e! 3 FO, PA-50504 Replaceable Parts Locator Diagram.