Quick Start Guide

Quick Start Guide for C190SHP,
C190POS, C190DSK – Page 1
C190SHP, C190 POS, C190 DSK User Guide Page 1
Cubetape
C190 POS
C190DSK
Cradle
C190CRC
USB Cable
www.cubetape.com
Quickstart
Guide
Contents of C190SHP:
Powering On/Off and Bluetooth Pairing:
• Power on Cubetape by pressing and holding m button for 3 seconds
Power off Cubetape by pressing and holding m button for 6 seconds
• To pair with cradle, scan the pairing barcode on the front of the cradle
• Connection is successful when the Blue LED indicators on Cubetape and
the cradle are permanently ON. If the Blue LED indicators continue to
flash, re-scan the Bluetooth pairing barcode on the cradle.
• Cubetape will remain ON while it has an active Bluetooth connection,
otherwise it will power OFF after around 3 minutes
P airing
barcode
Operaons and Measuring:
√
CORRECT
INCORRECT
x
Extend the tape, press the
‘m’ buon
to scan the barcode
measurement on the tape
• Blue LED indicators are on permanently when
connected
• To scan a barcode ID, press ‘m’
DIP switches beneath cradle:
USB
Cable
PC
Cradle
Installaon:
OFF ON DEFAULT
5(6(59('
COMMS MODE
RESERVED
RESERVED

USB-VPC
--
--

USB-HID
--
--
2))
ON
OFF
OFF
# 2018001