Operator’s Manual FastAttach™ Brush Guard 19A30038100 WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS PRODUCT. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 Form No.
1 To The Owner Thank You Thank you for purchasing a Cub Cadet FastAttach™ Brush Guard. It was carefully engineered to provide excellent performance when properly operated and maintained. Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate and maintain your product. Please be sure that you, and any other persons who will operate the product, carefully follow the recommended safety practices at all times.
2 Assembly & Set-Up Contents of Carton 9 5 7 10 10 4 8 3 9 8 7 6 1 2 Part Number Description Qty. 1 689-00618 Brush Guard Assembly 1 2 731-13094 Guard, Fascia RH 1 3 731-13095 Guard, Fascia LH 1 4 689-00686 Bracket Assembly, Front RH 1 5 689-00685 Bracket Assembly, Front LH 1 6 710-04995A Screw, 5/16-14 X .750 6 7* 747-06963 Pin, 0.500 X 1.70 2 8* 714-3020 Internal Cotter Pin 2 9* 710-3001 Screw 3/8-16 X .
Required Tools • 9/16” Socket Wrench (1) Model 19A30038100 FastAttach™ Brush Guard kit is designed for use with select Cub Cadet XT1 & XT2 Enduro Series Lawn Tractors. 2. WARNING! Disengage the PTO, engage the brake lock, and stop the tractor engine before performing any preparation procedures. Place the tractor on a firm and level surface before beginning installation or removal procedures. • Align the brush guard assembly with the FastAttach™ brackets installed in step 1 and push assembly together.
FastAttach™ Front Attachments Description Part Number All-Season Plow 19A30037100 Brush Guard 19A30038100 More coming soon. Visit your local Cub Cadet Dealer or CubCadet.com for more information. FastAttach™ Rear Attachments Spreader (100 lb capacity) 19A30028100 Cargo Carrier (80 lb capacity) 19A30029100 Bagger (42" and 46" Decks) 19A30030100 Sprayer / Cargo Carrier Combo 19A30035100 More coming soon. Visit your local Cub Cadet Dealer or CubCadet.com for more information.
CUB CADET LLC MANUFACTURER’S LIMITED WARRANTY FOR SEPARATELY SOLD ATTACHMENTS AND ACCESSORIES IMPORTANT: To obtain warranty coverage owner may be required to present an original proof of purchase and applicable maintenance records to the servicing dealer. Please see the operator’s manual for information on required maintenance and service intervals.
Manual del Operador Protector de cepillo FastAttach™ 19A30038100 ADVERTENCIA LEA Y CUMPLA TODAS LAS REGLAS Y LAS INSTRUCCIONES DE SEGURIDAD DE ESTE MANUAL ANTES DE INTENTAR OPERAR ESTE PRODUCTO. SI NO SIGUE ESTAS INSTRUCCIONES, SE PUEDEN PROVOCAR LESIONES PERSONALES. CUB CADET LLC, P.O.
1 Al propietario Muchas gracias Gracias por comprar un protector de cepillo Cub Cadet FastAttach™. Ha sido cuidadosamente diseñado para brindar excelente rendimiento si se lo hace funcionar y se lo mantiene correctamente. Por favor lea todo este manual antes de hacer funcionar el equipo. El manual le indica cómo configurar, hacer funcionar y mantener el producto de manera fácil y segura.
2 Armado e Instalación Contenido de la caja 9 5 7 10 10 4 8 3 9 8 7 6 1 2 Ref.
• Llave tubular de 9/16 in (1) El juego de la protección de cepillo modelo 19A30038100 FastAttach™ está diseñado para ser utilizado con los tractores cortacésped Cub Cadet XT1 y XT2 serie Enduro. 2. • Llave abierta/de estrella de 9/16 in (1) Alinee el conjunto de la protección del cepillo con los soportes FastAttach™ instalados en el Paso 1 y empuje todo el conjunto. Consulte la Figura 1-2.
Accesorios frontales FastAttach™ Descripción Número de pieza Pala para cada estación 19A30037100 Protección del cepillo 19A30038100 Más productos próximamente. Visite al distribuidor de Cub Cadet de su localidad o CubCadet.com para obtener más información.
CUB CADET LLC GARANTÍA LIMITADA DEL FABRICANTE PARA ACCESORIOS Y ELEMENTOS QUE SE VENDEN POR SEPARADO IMPORTANTE: Para obtener cobertura de garantía, el propietario debe presentar el comprobante de compra original y los registros de mantenimiento correspondientes al centro de servicio técnico autorizado del distribuidor.
Manuel de l'utilisateur Grillage de protection FastAttach™ 19A30038100 AVERTISSEMENT LISEZ ET SUIVEZ TOUTES LES RÈGLES ET LES DIRECTIVES DE SÉCURITÉ OFFERTES DANS CE MANUEL AVANT DE FAIRE FONCTIONNER CE PRODUIT. LE NON-RESPECT DE CES INSTRUCTIONS PEUT ENTRAÎNER DES BLESSURES CORPORELLES. CUB CADET LLC, P.O.
1 Au propriétaire Merci Merci d'avoir acheté un grillage de protection FastAttach™ de Cub Cadet. Il a été soigneusement conçu afin de fournir un rendement exceptionnel lorsqu'il est utilisé et entretenu correctement. Veuillez lire ce manuel en entier avant de mettre l'équipement en marche. Ce manuel vous indique comment installer, utiliser et entretenir votre machine facilement et sans danger.
2 Assemblage et montage Contenu de la boîte 9 5 7 10 10 4 8 3 9 8 7 6 1 2 Réf. Numéro de pièce Description Qté.
Outils requis • Clé à douille 9/16 po (1) Modèle 19A30038100 La trousse du grillage de protection FastAttach™ est conçu pour être utilisé avec certains tracteurs de pelouse CUB CADET XT1 et XT2 de la série Enduro. 2. • Alignez l'ensemble du grillage de protection avec les supports FastAttach™ installés à l'étape 1 et poussez-les. Consultez la Figure 1-2.
Accessoires avant FastAttach™ Description Numéro de pièce Charrue tout-saison 19A30037100 Grillage de protection 19A30038100 Plus bientôt. Visitez votre revendeur local Cub Cadet ou le site CubCadet.com pour en savoir plus.
Notes
CUB CADET LLC GARANTIE LIMITÉE DU FABRICANT POUR LES ACCESSOIRES VENDUS SÉPARÉMENT IMPORTANT : Le propriétaire doit présenter le reçu original et les relevés d’entretien au concessionnaire pour faire honorer la garantie. Le propriétaire de l’équipement est tenu de respecter le calendrier d’entretien tel qu’il est indiqué dans le manuel de l’utilisateur.