Product Manual

ManualsBrandsCTEK ManualsBattery ChargersMXS 10 12V 10A Battery Charger

EN • 3

MANUAL

SAFETY

•Thechargerisdesignedforchargingonlybat-

teriesaccordingtothetechnicalspecication.

Donotusethechargerforanyotherpurpose.

Alwaysfollowbatterymanufacturers'userand

safetyrecommendations.

•Nevertrytochargenon-rechargeablebatteries.

•Neverplacethechargerontopofthebattery

orcoverthechargerwhencharging.

•Neverchargeafrozenordamagedbattery.

•NeverchargeaLi-batterywithtemperature

below0°C(32°F)ifnotspeciedbythebattery

manufacturer.

•Neveruseachargerwithdamagedcables.

Ensurethatthecableshavenotbeendamaged

byhotsurfaces,sharpedgesorinanyother

way.

•Neverplaceafan-cooledchargersothatdust,

dirtorsimilarcanbesuckedintothefan.

•Adamagedcablemustbereplacedbya

CTEKrepresentativeusinganoriginalpart

suppliedbyCTEK.Adetachablecablecanbe

replacedbytheuserusinganoriginalpartsup-

pliedbyCTEK.

•Connectiontothemainssupplymustbein

accordancewiththenationalregulationsfor

electricalinstallations.

•Chargerswithgroundedmainsplugmustonly

beconnectedtoagroundedsocketoutlet.

•Duringcharging,Lead-Acidbatteriescould

emitexplosivegases.Preventsparkscloseto

thebattery.Provideforgoodventilation.

•ChargerswithIP-classlowerthanIPx4are

designedforindooruse.Seetechnicalspeci-

cation.Donotexposetorainorsnow.

•Connectthechargertothebattery´spositive

poleandthentothenegativepole.Forbatter-

iesmountedinsideavehicle,connectthenega-

CONGRATULATIONS

tothepurchaseofyournewprofessionalswitchmodebatterycharger.Thischargeris

includedinaseriesofprofessionalchargersfromCTEKSWEDENABandrepresentsthe

latesttechnologyinbatterycharging.

Summary of content (8 pages)

PAGE 1
CONGRATULATIONS to the purchase of your new professional switch mode battery charger. This charger is included in a series of professional chargers from CTEK SWEDEN AB and represents the latest technology in battery charging. SAFETY • The charger is designed for charging only batteries according to the technical specification. Do not use the charger for any other purpose. Always follow battery manufacturers' user and safety recommendations. • Never try to charge non-rechargeable batteries.
PAGE 2
tive connection to the vehicle chassis remote from the fuel pipe. Then connect the charger to mains supply. • Disconnect the charger from the mains supply. Next remove the negative connection (vehicle chassis) and then the positive connection. • Don’t leave any battery unattended for a longer period of time during charging. If any error occurs disconnect the charger manually. • (IEC 7.12 ed.
PAGE 3
HOW TO CHARGE 1. Connect the charger to the battery. EN 2. Connect the charger to the wall socket. The power lamp will indicate that the mains cable is connected to the wall socket. The error lamp will indicate if the battery clamps are incorrectly connected. The reverse polarity protection will ensure that the battery or charger will not be damaged. 3. Press the MODE-button to select charging program. 4. Follow the 8-step display through the charging process.
PAGE 4
CONNECT THE CHARGER TO A BATTERY INFO If the battery clamps are incorrectly connected, the reverse polarity protection will ensure that the battery and charger are not damaged. Comfort Connect – + – + For batteries mounted inside a vehicle 1. C onnect the red clamp to the battery's positive pole. 2. Connect the black clamp to the vehicle chassis remote from the fuel pipe and the battery. 3. Connect the charger to the wall socket. 4.
PAGE 5
ERROR LAMP TECHNICAL SPECIFICATIONS 1. Is the chargers positive lead connected to the batterys positive pole? 2. Is the charger connected to a 12V battery? 3. Has charging been interrupted in STEP 1, 2 or 5? Restart the charger by pressing the MODE-button. If charging is still being interrupted, the battery... step 1: ...is seriosly sulphated and may need to be replaced. step 2: ...can not accept charge and may need to be replaced. step 5: ...can not keep charge and may need to be replaced.
PAGE 6
CHARGING PROGRAM SOFT START BULK ABSORPTION ANALYSE RECOND FLOAT PULSE 11 2 3 4 5 6 7 8 AGM RECOND 15.8V 10A until 12.6V 15.8V 10A until 12.6V 15.8V 10A until 12.6V Increasing voltage to 14.4V @ 25°C 10A Increasing voltage to 14.7V @ 25°C 10A Increasing voltage to 14.4V @ 25°C 10A 14.4V @ 25°C Declining current Checks if voltage drops to 12V 13.6V 10A 12.7V‒14.4V 10‒2A 14.7V @ 25°C Declining current Checks if voltage drops to 12V 13.6V 10A 12.7V‒14.7V 10‒2A 14.
PAGE 7
LIMITED WARRANTY EN CTEK SWEDEN AB, issues this limited warranty to the original purchaser of this product. This limited warranty is not transferable. The warranty applies to manufacturing faults and material defects for 2 years from the date of purchase. The customer must return the product together with the receipt of purchase to the point of purchase.
PAGE 8
10 • EN 20014905G