WX SENSOR User Manual Desk Configuration Ceiling Configuration
ENVIRONMENTAL RECOMMENDATIONS Your device is made of materials that can be recycled and reused if dismantled by a specialized firm. Please follow local regulations on how to dispose of old packaging materials, used batteries and your previous device. WARNINGS - Read the instructions in the manual. The safety provided by this product is only guaranteed for an intended use to its purpose. Maintenance can only be carried out by qualified staff.
Table of contents Table of contents____________________________________________________________ 1 1. Product description ____________________________________________________ 2 2. Installation of the product in Desk configuration _____________________________ 3 3. Installation of the product in Ceiling configuration ____________________________ 4 4. Field of view of the presence measurement _________________________________ 6 5.
1. Product description Part of the Transform Together® range, the WX SENSOR provides wireless measurement and transmission of presence information at a workstation or in a room. It can also, optionally, measure the number of people present in a space. The sensor is equipped with a bolometer that delivers 6400 temperature points over an area of 15 to 20m². A CSM algorithm transforms these measurements into a number of people present in the room.
2. Installation of the product in Desk configuration In this configuration, the WX SENSOR can be installed in all types of furniture with a flat, melamine, laminate, glass or metal coating. When ordering, it will be necessary to specify the desired installation kit : 1) Double-sided adhesives (ref VHB 4991 at 3M).
3. Installation of the product in Ceiling configuration In this configuration, the WX SENSOR can be installed on most types of ceiling (plaster, suspended ceiling, concrete, cable tray, etc.). When ordering, it will be necessary to specify the desired installation kit : 1) 2) 3) 4) None Double-sided adhesives (ref VHB 4991 at 3M).
Location for adhesive Installation label Location for threaded rod ØM5 or M6 Location for magnets Product label We will differentiate the different ceiling product thanks to : 1) The commercial reference indicated on the product label (see chapter « Commercial References ») 2) The color of the installation label text for un product : a. Performing presence measurements and counting : b. Performing presence measurements and no counting : c.
4.
5.
6. Start up the product The product will be delivered and configured in an operating mode blocking all radio frequency communication. During installation, before fixing the sensor to its support, the installer must press the pairing button in order to switch the product to nominal operation. Configuration Desk Configuration Ceiling BLE pairing button 7.
9.
10. Certification FCC certification This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
11. Human exposure to radio frequencies This equipment complies with the limits of human exposure to electromagnetic fields (EMF) for devices operating in the frequency range from 0 Hz to 300 GHz according to the EMF EN 62311 standard. 12. Notes about the batteries The WX SENSOR is equipped with one or two batteries depending on the autonomy needs desired by the customer.
13.
14. Technical support In order to get a technical support : Website Mail Phone number Address www.csmres.com support@csmres.
