m1 Quick Reference Power On 2 sec Zero 1 setup 1 setup sec Backlight Power Off sec > 20 PSI, 1.4 bar, 140 kPa, 1.
m1Quick Reference Note: Pressing the enter button always returns the gauge to operating mode. If you want to set multiple Display Functions, press the setup button to navigate from one Display Function to the next, then press the enter button when you are done.
m1Quick Reference Gauge Setup Map continued Power Management Backlight Timer 3x * ( ) + next *This menu can be accessed only when the gauge is off. Lt: 15 (light stays on for 15 seconds) Lt: 60 (light stays on for 60 seconds) Lt: On (light does not turn off automatically) ( ) +1 next = To Clear Peaks or Line Pressure = 1 sec Ultra Low Power Mode rd 0.1. . . . . . . (1/10 minutes . . . 30,000 hours) rd 0.2. . . . . . . (1/5 minutes . . . . 25,000 hours) setup rd 1.0. . . . . . . (1/1 minute .
© 2013 Crystal Engineering Corporation 708 Fiero Lane, Suite 9, San Luis Obispo, California 93401-8701 4695.