WHIM Business Whim Pro, Whim Book, N141 User Manual V1.0 Note • This manual is mainly for Windows 10. There might be some slight differences if you use other windows systems. • This manual contains the common functions of most models. Maybe it does not fit very well with your model for some functions, or maybe some of your model functions are not contained in this manual. • The illustrations in this manual may differ from the actual products. Please prevail in kind.
Content Chapter 1 Know your computer ............................................................................................ 1 Front View ............................................................................................................... 1 Left View.................................................................................................................. 6 Right View ...............................................................................................................
Chapter 1 Know your computer Front View Attention: 1
• When you close the display, please be careful not to leave pens or any other objects in between the display and the keyboard. Otherwise, the display may be damaged.
Chapter 1 Know your computer ■Using the keyboard Keyboard function keys Pressing certain function key to enter the corresponding system settings immediately. Keyboard Function Through the use of the function keys, you can change operational feature instantly. To use this function, press and hold ; then press one of the function keys.
Chapter 1 Know your computer ■Positioning the display panel.The display panel can be opened to any angle up to 180 degrees. Note: • Do not open the display with too much force, otherwise the panel or hinges may be damaged. • Do not rotate the camera with too much force, otherwise the camera may be damaged.
USB 2.0Port You can connect a USB device to your computer by inserting its USB plug (Type A) into the USB port on your computer. Combo Audio Jack 1. The combo audio jack does not support a conventional microphone connection. 2. Due to differences in industry-standard, when third-party connects headphones or headset microphone, recording functions may not be supported well.
UDisk Port You can connect a Type C device to your computer by inserting its USB plug (Type C) into the Type C port on your computer. Switch Control camera, mic on and off.
Chapter 1 Know your computer Bottom View Chapter 2 Operating Windows10 Configuring the operating system in initial use. The first time you use, you need to configure the operating system. The configuration process may include the following steps: 1. Accepting the End User License Agreement 2. Configuring the Internet connection 3.
4. Creating a user account Operating System Interface Windows 10 comes with a powerful and useful start menu. To open the start menu, do one of the following: • Press the Windows key • Select Start on the keyboard on the lower-left corner of the desktop Chapter 2 Operating Windows10 Settings Button Settings let you perform basic tasks. You can also search for more settings with the settings search box in the upper-right corner.
Power Button The power button is on the Start menu, click it you can choose to shut down or restart the computer, or put the computer into sleep mode. Start Button Select the Start button on the taskbar, open the start menu Search Box Search for anything, anywhere Start menu You can personalize the start menu with your favorite apps. To personalize the Start menu, do the following: Right-click the application which you want to add to the Start menu, then select Pin to Start menu.
Putting your computer to sleep If you will be away from your computer for only a short time, put the computer to sleep. When the computer is in sleep mode, you can quickly wake it to resume use, by passing the startup process. To turn the computer to sleep mode, do one of the following: • Close the display lid. • Press the Power button. •Open the Start menu, and then select power -sleep To wake the computer, do one of the following: • Press any key on the keyboard.
Tasks view To open the task view, do one of the following: • Select the task view button on the taskbar. • Press the Windows + Tab key. • Swipe from the left edge of the screen to the middle.
To enable the wireless feature, do the following: • Click the network menu on the right bottom of the taskbar , to open the Network configuration page Connect to a wireless network • The computer will automatically scan for available wireless networks and list them in the list when wireless is enabled. • Click the network name in the list to choose, and click Connect. NOTE: Some of the networks need to connect the network on basis of security key or password.
1. Display issues When I turn on the computer, nothing appears on the screen. • If the screen is blank, please make sure: - The AC power adapter is connected to the computer, and plugged into a working electrical outlet. - The computer power is on. Press the power button again to confirm. • If these items are properly set, and the screen remains blank, have the computer serviced. The screen goes blank while the computer is on • Your screen saver or power management may be enabled.
more. If the computer still does not respond, remove the AC power adapter. •Your computer might lock when it enters sleep mode during a communication operation. Disable the sleep timer when you are working on the network. The connected external device does not work •Do not connect or disconnect the non-USB cable device in the boot state, otherwise you may damage your computer.
IC statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.