Installation Manual

- Adds Bluetooth Music streaming to the OEM Acura/Honda radio.

- USB music playback with track up, track down and folder controls from the radio panel or steering

wheel controls.

- Adds 3.5mm auxiliary audio input jack.

- Hear turn-by-turn Navigation App Voice Prompts on your car audio system while in Bluetooth mode.

- USB port on the module can also be used to charge your phone.

- Magnetic phone mount included.

1. Not compatible on Acura vehicles equipped with AcuraLink.

2. Radio must have a 14-pin CD changer port.

3. Not compatible with vehicles with DVD Navigation or factory rear

view camera.

1. Carefully remove the radio to gain access to the radio connectors.

2. Locate the 14-pin CD changer port. If there is a connector plugged into this cavity, you need to

unplug it.

3. Plug the WHITE 14-pin connector of the BTS-HN2 to the CD changer port of the radio.

4. If the line-in feature will be used, plug a 3.5mm to 3.5mm cable (sold separately) to the BTS-HN2

module and run towards the desired location.

5. If a USB flash drive will be used, plug in a male to female USB cable (not included) to the

BTS-HN2 module and run to the desired location.

6. You can also mount the BTS-HN2 to an accessible location such as the center console or glove

box, to use the 3.5mm line-in and USB features.

7. Test the system for functionality before putting back the radio.

iPod, USB flash drive

and 3.5mm cable not

included.

Navigations Apps

rev.092117

1/2

PAGE 1
- Adds Bluetooth Music streaming to the OEM Acura/Honda radio. USB music playback with track up, track down and folder controls from the radio panel or steering wheel controls. Adds 3.5mm auxiliary audio input jack. Hear turn-by-turn Navigation App Voice Prompts on your car audio system while in Bluetooth mode. USB port on the module can also be used to charge your phone. Magnetic phone mount included. 1. Not compatible on Acura vehicles equipped with AcuraLink. 2.
PAGE 2
For Bluetooth function: 1. Turn on the radio and press the CD button. Screen will show “CD1 01”. 2. Go to the Bluetooth menu on your phone and connect to “Crux BT”. 3. BTS-HN2 will announce when the phone has been connected. 4. Play the music on your phone or other audio player and audio should be heard on the factory sound system. For USB Mode: 1. Plug in your USB flash drive to the BTS-HN2 USB port. 2. Turn on the radio and press the CD button. Screen will show “CD1 01”. 3.