Owner's Manual

+ +
R
INTERFACING SOLUTIONS
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.082020
BTS-HN2
Bluetooth Audio Streaming, USB Player and
Auxiliary Audio Input for Select Acura and Honda Vehicles
1 of 2
- Adds Bluetooth Music streaming to the OEM Acura/Honda radio.
- USB music playback with track up, track down and folder controls from the radio panel or steering wheel controls.
- Adds 3.5mm auxiliary audio input jack.
- Hear turn-by-turn Navigation App Voice Prompts on your car audio system while in Bluetooth mode.
- USB port on the module can also be used to charge your phone.
- Magnetic phone mount included.
PRODUCT FEATURES:
NOTES:
1. Not compatible on Acura vehicles equipped with AcuraLink.
2. Radio must have a 14-pin CD changer port.
3. Not compatible with vehicles with DVD Navigation or factory rear view camera.
INSTALLATION INSTRUCTIONS:
1. Carefully remove the radio to gain access to the radio connectors.
2.Locate the 14-pin CD changer port. If there is a connector plugged into this cavity, you need to unplug it.
3. Plug the WHITE 14-pin connector of the BTS-HN2 to the CD changer port of the radio.
4. If the line-in feature will be used, plug a 3.5mm to 3.5mm cable (sold separately) to the BTS-HN2 module and
run towards the desired location.
5. If a USB ash drive will be used, plug in a male to female USB cable (not included) to the BTS-HN2 module and
run to the desired location.
6. You can also mount the BTS-HN2 to an accessible location such as the center console or glove box, to use the
3.5mm line-in and USB features.
7. Test the system for functionality before putting back the radio.