CR7022A-BK Vinyl Turntables with external Speaker - USER MANUAL -
Product Description 9. AUX IN Jack 10. Power/Mode Button 11. USB Port 12. Previous Section/ Previous Station 13. Record Button 14. Next Section/Next Station 15. Play/Pause 16. Volume Knob 17. LED Display 1. Turntable Platter 2. Turutable Shaft 3. Tonearm 4. Tonearm Lever 5. Auto-stop Switch 6. Speed Switch 7. Hold Down Clip 8. 45 RPM Adaptor 18. Left/Right Speaker Jack 19. FM Antenna 20. Audio Output Jack 21. Power Input Jack General Operation Essential Setup 1.
1. Press “ /MODE” key to change to Bluetooth pairing mode, the LED display will show “bt”. 2. Turn on the Bluetooth feature of your audio device, search for “CROSLEY CR7022A” and pair. 3. Once your device is successfully connected with the speakers, you will hear a short confirmation sound from the speakers. 4. Play and stream music from your device to the speakers. Hold and press the “Play/Pause” key to disconnect the Bluetooth connection.
The audio Jacks output analog line-level signals and could be connected directly with a pair of active/powered speakers or the appropriate input of your stereo system. Note: 1. The Audio Jacks are not designed to be connected directly to the passive/unpowered speakers. If connected to the passive speakers, the volume level will be very low. 2. If want to mute the unit, please hold and press the “ ” button to mute the unit or unplug the speakers from Out L/R jack.
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.