CR7016A Rhapsody Entertainment Center Instruction Manual Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. – 6 p.m., EST, Monday – Friday 1-888-CROSLEY www.crosleyradio.
English Safety Instructions Read and understand this entire manual before using this product. Keep these instructions for future reference. 1. Do not use this product near water. 2. This product should be operated only by the type of power source indicated on the marking label or in this instruction manual. 3. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one blade wider than the other. This plug will fit into the power outlet only one way.
English Items in this package Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package: Turntable 45 RPM adapter 3.5mm aux in cable Please contact Crosley customer service if there is any accessory missing from the package. Retain the original packaging materials for exchange or return purposes. Specifications Power Power consumption Speaker Turntable speed Replacement needle 12V, 2A 18W 3.
English Product Description 1. Speakers 2. Play/Pause Button 3. Stop Button 4. Bluetooth Indicator 5. Repeat Button 6. LED Display 7. Backward Skip Button 8. Power Indicator 9. Forward Skip Button 10. CD Door Open/Close Button 11. Function Knob 12. CD Tray 13. Tuning Knob 14. Dial Scale 15. On/Off Volume Knob 16. Turntable Platter 17. Turntable Spindle 18. Tonearm Lever 19. Auto-stop Switch 20. Tonearm 21. Speed Switch 22. Hold Down Clip 23. Power Jack 24. RCA Jacks 25. Aux In Jack 26. Headphone Jack 27.
English Initial Setup Essential Setup 1. Place the unit on a flat and level surface. The selected location should be stable and free from vibration. 2. Remove the tie-wrap that is holding the tonearm. 3. Plug the power cord to the power outlet. Stereo System Connection RCA Jacks The RCA Jacks output analog line-level signals and could be connected directly with a pair of active/powered speakers or the appropriate input of your stereo system.
English Turntable Operation 1. 2. 3. 4. 5. Rotate the On/Off Volume Knob to turn on the power. Set the Function Knob to the PHONO position. Set the Speed Switch accordingly. Place the record on the turntable. Use the 45 RPM Adapter if necessary. Remove the stylus protector from the stylus assembly. Note: To avoid stylus damage, make certain the included stylus guard is in place whenever the turntable is being moved or cleaned. 6. Release the tonearm Hold Down Clip.
English Needle Replacement Removing Needle 1. Gently pull down the front edge of the needle. 2. Pull needle forward. 3. Pull out and remove. Installing Needle 1. Position the needle with its tip facing down. 2. Line up the back of the needle with the cartridge. 3. Insert the needle with its front end at a downward angle and gently lift the front of the needle upward until it snaps into place. Radio Operation 1. Set the Function Knob to the AM or FM position. 2.
English CD Playback Operation 1. Set the Function Knob to the CD position. 2. Press the Open/Close button to open the CD tray and put the CD in the tray with the labeled side facing up. 3. Press the Open/Close button again to close the tray. The LED display will show “--“ for a few seconds, then the total number of tracks on the CD. If it is a blank CD or an unrecognizable CD, it will show “00”. Note: MP3 or similar types of digital audio files cannot be read by the CD player. 4.
English Troubleshooting There is no power No power at the power outlet. To help save power consumption, some models will comply with the ERP energy saving standard. When there is no audio input for 20 minutes, the power will automatically cut-off. To turn power back on and resume playing, turn off the main power switch and turn it on again. Power is on, but the platter does not turn Turntable mode is not selected. Turntable’s drive belt has slipped off.
English FCC Statements NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CR7016A Centro de entretenimiento Rhapsody Manual de instrucciones ¿Tiene preguntas, ha tenido problemas o hay piezas faltantes? Antes de devolver el producto a la tienda, comuníquese con nuestro Servicio al Cliente de 8 a. m. a 6 p. m., hora del este, de lunes a viernes 1-888-CROSLEY www.crosleyradio.
Español Instrucciones de seguridad Lea y comprenda este manual en su totalidad antes de usar este producto. Conserve estas instrucciones para consultarlas en el futuro. 1. No use este producto cerca del agua. 2. Este producto debe ser utilizado solo con el tipo de fuente de alimentación indicado en la etiqueta o en este manual de instrucciones. 3. No subestime el propósito de seguridad del enchufe polarizado. Un enchufe polarizado posee dos hojas; una de ellas es más ancha que la otra.
Español Artículos en este empaque Antes de deshacerse de cualquier material del empaque, revíselo con atención y asegúrese de encontrar los siguientes artículos que se incluyen en este paquete: Tocadiscos Adaptador de 45 rpm Cable de entrada de 3.5 mm Comuníquese con el Servicio al Cliente de Crosley en caso de que faltara algún accesorio en el empaque. Conserve el material de embalaje original para realizar cambios o devoluciones.
Español Descripción del producto 1. Altavoces 2. Botón de reproducción/pausa 3. Botón de detención 4. Indicador de Bluetooth 5. Botón de repetición 6. Pantalla LED 7. Botón de salto hacia atrás 8. Indicador de Encendido 9. Botón de salto hacia delante 10. Botón de apertura/cierre de la puerta para CD 11. Perilla de funciones 12. Bandeja para CD 13. Perilla de sintonización 14. Indicador de estaciones 15. Perilla de volume y encendido/apagado 16. Bandeja del tocadiscos 17. Eje del tocadiscos 18.
Español Instalación inicial Instalación indispensable 1. Coloque la unidad en una superficie plana y nivelada. El lugar seleccionado debe ser estable y estar libre de vibraciones. 2. Quite la banda de sujeción que sostiene el brazo del tocadiscos. 3. Enchufe el cable de alimentación en un tomacorriente.
Español Funcionamiento de Bluetooth 1. Coloque el perilla de funciones en modo Bluetooth . La unidad emitirá un sonido de activación. 2. Active la conexión de Bluetooth en el dispositivo de audio, busque “CROSLEY CR7016A” y conéctelo. 3. Una vez que el dispositivo quede conectado correctamente, la unidad emitirá un sonido corto de confirmación. 4. Reproduzca música en forma inalámbrica desde el dispositivo hacia la unidad. Nota: Versión de Bluetooth – 5.0 Funcionamiento del tocadiscos 1.
Español Detención automática de la bandeja Si el Interruptor de detención automática se encuentra en la posición ENCENDIDO, la bandeja dejará de girar automáticamente cuando el disco termine de reproducirse. En raras ocasiones, si el tocadiscos deja de reproducir el disco antes de que termine, ajuste el interruptor a la posición APAGADO. El problema se debería solucionar de esta manera. Reemplazo de la aguja Quitar la aguja 1. Tire del borde delantero de la aguja con suavidad. 2.
Español Funcionamiento de la reproducción de CD 1. Ajuste el perilla de funciones a la posición CD. 2. Presione el botón Apertura/cierre para abrir la bandeja para CD y colocar el CD en la bandeja con el lado de la etiqueta hacia arriba. 3. Vuelva a presionar el botón de Apertura/cierre para cerrar la bandeja. La pantalla LED mostrará “--” durante unos pocos segundos y luego mostrará el número total de pistas en el CD. Si se trata de un CD vacío o un CD irreconocible, la pantalla mostrará "00".
Español Solución de problemas La unidad no enciende. El transformador no está conectado correctamente. Con el fin de ahorrar en el consumo de energía, algunos modelos cumplirán con el estándar de ahorro de energía ERP (productos relacionados con la energía). En el caso de que no se produzca la entrada de audio durante 20 minutos, estos equipos se desactivarán automáticamente. Para volver a encender la unidad y reanudar la reproducción, apáguela y vuelva a encenderla.
Español Declaraciones de la FCC NOTA: Este equipo se verificó y se comprobó que cumple con los límites para un dispositivo digital clase B, conforme a la Sección 15 de las reglas de la Comisión Federal de Comunicaciones (FCC). Estos límites están diseñados para brindar una protección razonable frente a interferencia perjudicial en un establecimiento residencial.
CR7016A Centre de divertissement Rhapsody Manuel d’utilisation Des questions, problèmes, pièces manquantes? Avant de retourner au magasin, appelez le service à la clientèle De 8 h à 18 h, HNE, du lundi au vendredi 1-888-CROSLEY www.crosleyradio.
Français Instructions de sécurité Veuillez lire et comprendre l'intégralité de ce manuel avant d'utiliser ce produit. Conservez ces instructions pour pouvoir les consulter ultérieurement. 1. Ne pas utiliser ce produit près de l’eau. 2. Ce produit doit être alimenté uniquement par le type de source d’alimentation indiqué sur l’étiquette ou dans le présent manuel d'utilisation. 3. Ne pas tenter de modifier le dispositif de sécurité que constitue la fiche polarisée.
Français Contenu de la trousse Avant de jeter les emballages, veuillez les passer en revue minutieusement et vérifier que vous avez les éléments suivants fournis dans cette trousse : Tourne-disque Adaptateur 45 tours Câble d'entrée auxiliaire de 3,5 mm Veuillez contacter le service à la clientèle de Crosley s'il manque des accessoires dans la trousse. Conservez les emballages d'origine pour procéder à un échange ou à un retour.
Français Description du produit 1. 2. 3. 4. 5. Haut-parleurs Bouton Lecture/Pause Bouton Arrêt Voyant Bluetooth Bouton Lecture en boucle 6. Affichage à DEL 7. Bouton Précédent 8. Voyant d’alimentation 9. Bouton Suivant 10. Bouton d'ouverture/fermeture de la porte du compartiment CD 11. Bouton de fonction 12. Porte-CD 13. Bouton de syntonisation 14. Échelle de syntonisation 15. Bouton On/Off du volume 16. Plateau du tournedisque 17. Broche du tourne-disque 18. Levier du bras de lecture 19.
Français Configuration initiale Configuration de base 1. Placez l'appareil sur une surface plane. L'emplacement choisi doit être stable et sans vibration. 2. Retirez l'attache qui retient le bras de lecture. 3. Branchez le cordon d’alimentation à la prise de courant.
Français Utilisation du Bluetooth 1. Réglez le bouton de fonction sur la position Bluetooth, l'unité émettra un son d'activation. 2. Activez la fonction Bluetooth de votre appareil audio, recherchez « CROSLEY CR7016A » et associez l'appareil. 3. Une fois votre appareil associé à l'unité, celle-ci émettra un bref son de confirmation. 4. Lire et diffuser de la musique en continu de votre appareil sur l'unité. Remarque : Versions de Bluetooth – 5.0 Utilisation du tourne-disque 1.
Français Arrêt automatique du plateau Si le sélecteur d'arrêt automatique est en position ON (MARCHE), le plateau s'arrêtera automatiquement de tourner lorsque la lecture du disque sera terminée. Dans quelques rares occasions, si le tourne-disque s'arrête de lire avant la fin du disque, positionnez le sélecteur sur OFF (ARRÊT) : le tournedisque devrait surmonter ce problème. Remplacement de l'aiguille Retrait de l'aiguille 1. Tirez doucement vers le bas le bord avant de l'aiguille. 2.
Français Mode d'emploi de la lecture d'un CD 1. Mettez le bouton de fonction en position CD. 2. Appuyez sur le bouton Ouvrir/Fermer pour ouvrir le porte-CD et mettez le CD dans le porte-CD avec le côté marqué du disque vers le haut. 3. Appuyez de nouveau sur le bouton Ouvrir/Fermer pour fermer le porte-CD. L’écran ACL indique « -- » pendant quelques secondes, puis le nombre total de pistes sur le CD. S'il s'agit d'un CD vierge ou inconnu, il indiquera « 00 ».
Français Dépannage L’appareil ne s’allume pas L'adaptateur d’alimentation n’est pas branché correctement. Pour contribuer à économiser de l'énergie, certains modèles se conformeront à la norme d'économie d'énergie ERP (Energy-Related Products). En l'absence d'entrée audio pendant 20 minutes, l'alimentation se coupera automatiquement. Pour rétablir l’alimentation en courant et reprendre la lecture, éteignez l'appareil puis rallumez-le.
Français Déclarations relatives à la FCC REMARQUE : Ce matériel a été testé et jugé en conformité avec les limites pour un appareil numérique de Classe B, conformément à la partie 15 des règles de la FCC. Ces limites ont été établies pour offrir une protection raisonnable contre l’interférence nuisible dans une installation résidentielle.