CR7011A Burton Entertainment Center Instruction Manual Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. – 6 p.m., EST, Monday – Friday 1-888-CROSLEY www.crosleyradio.
English Safety Instructions Read and understand this entire manual before using this product. Keep these instructions for future reference. 1. Do not use this product near water. 2. This product should be operated only by the type of power source indicated on the marking label or in this instruction manual. 3. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one blade wider than the other. This plug will fit into the power outlet only one way.
English Items in this package Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package: • Turntable • 45 RPM adapter • 3.5mm aux in cable Please contact Crosley customer service if there is any accessory missing from the package. Retain the original packaging materials for exchange or return purposes. Specifications Power Power consumption Speaker Turntable speed Replacement needle 120V, 60Hz 18W 3.
English Product Description 1. Speakers 2. Dial Scale 3. Forward Skip Button 4. Backward Skip Button 5. Program Indicator 6. Program Button 7. AM/FM Button 8. Function Switch 9. Volume Knob 10. CD Tray 11. Aux In Jack 12. Repeat Indicator 13. Repeat Button 14. Stop Button 15. Play Indicator 16. Play/Pause Button 17. CD Door Open/Close Button 18. Power Button 19. Bluetooth Indicator 20. Tuning Knob 21. Headphone Jack 22. 45 RPM Adapter 23. Turntable Platter 24. Turntable Spindle 25. Tonearm Lever 26.
English 31. External Antenna 32. Power Cord Plug 33. Cassette Eject/Fast Forward Button 34.
English Initial Setup Essential Setup 1. Place the unit on a flat and level surface. The selected location should be stable and free from vibration. 2. Remove the tie-wrap that is holding the tonearm. 3. Plug the power cord to the power outlet. Aux Input Connection You can connect an audio device to this unit and play your music through its speakers. To do this, connect the 3.5mm auxiliary cable between your audio device and the Aux In Jack of this unit and start playing the music.
English Turntable Operation 1. Press the Power Button to turn on the power. 2. Set the Function Switch to the TAPE/PHONO position. Note: If a tape is inserted the tape will play instead of the turntable. 3. Set the Speed Switch accordingly. 4. Place the record on the turntable. Use the 45 RPM Adapter if necessary. 5. Remove the stylus protector from the stylus assembly. Note: To avoid stylus damage, make certain the included stylus guard is in place whenever the turntable is being moved or cleaned. 6.
English Needle Replacement Removing Needle 1. Gently pull down the front edge of the needle. 2. Pull needle forward. 3. Pull out and remove. Installing Needle 1. Position the needle with its tip facing down. 2. Line up the back of the needle with the cartridge. 3. Insert the needle with its front end at a downward angle and gently lift the front of the needle upward until it snaps into place. Radio Operation 1. Press the Power Button to turn on the power. 2.
English CD Playback Operation 1. Press the Power Button to turn on the power. 2. Set the Function Switch to the CD position. 3. Press the Open/Close button to open the CD tray and put the CD in the tray with the labeled side facing up. 4. Press the Open/Close button again to close the tray. The LED display will show “--“ for a few seconds, then the total number of tracks on the CD. If it is a blank CD or an unrecognizable CD, it will show “00”.
English Cassette Operation 1. Press the Power Button to turn on the power. 2. Set the Function Switch to TAPE/PHONO position. 3. Insert the prerecorded cassette through the cassette door and it will start playing automatically. 4. To fast forward, press the cassette Eject/F.F button half way in. To stop fast forwarding and return to the playback mode, press the button again. Note: To rewind the cassette, you would need to reject the tape and flip it over for the other side and fast forward. 5.
English Troubleshooting There is no power • No power at the power outlet. • To help save power consumption, some models will comply with ERP energy saving standard. When there is no audio input for 20 minutes, their powers will automatically cut-off. To turn power back on and resume playing, turn off the power and turn it on again. Power is on, but the platter does not turn • Turntable mode is not selected. • Turntable’s drive belt has slipped off.
English FCC Statements NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.