CR42D Lancaster Turntable Instruction Manual Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. – 6 p.m., EST, Monday – Friday 1-888-CROSLEY www.crosleyradio.
English Safety Instructions Read and understand this entire manual before using this product. Keep these instructions for future reference. 1. Do not use this product near water. 2. This product should be operated only by the type of power source indicated on the marking label or in this instruction manual. 3. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one blade wider than the other. This plug will fit into the power outlet only one way.
English Items in this package Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package: Turntable 45 RPM adapter 3.5mm aux in cable Please contact Crosley customer service if there is any accessory missing from the package. Retain the original packaging materials for exchange or return purposes. Specifications Power Power consumption Speaker Turntable speed Replacement needle 120V, 60Hz 18W 3.
English Product Description 1. Speakers 2. Program Button 3. Forward Skip Button 4. Backward Skip Button 5. Function Switch 6. On/Off Volume Knob 7. Aux In Jack 8. LED Display 9. CD Tray 10. Headphone Jack 11. Tuning Knob 12. AM/FM Switch 13. CD Door Open/Close Button 14. Stop Button 15. Play/Pause Button 16. Play Indicator 17. Dial Scale 18. Program Indicator 19. Turntable Platter 20. Turntable Spindle 21. 45 RPM Adapter 22. Tonearm Lever 23. Tonearm 24. Auto-stop Switch 25. Speed Switch 26.
English 28. Cassette Door 29. Cassette Eject/Fast Forward Button 30. External Antenna 31.
English Initial Setup Essential Setup 1. Place the unit on a flat and level surface. The selected location should be stable and free from vibration. 2. Remove the tie-wrap that is holding the tonearm. 3. Plug the power cord to the power outlet. Aux Input Connection You can connect an audio device to this unit and play your music through its speakers. To do this, connect the 3.5mm auxiliary cable between your audio device and the Aux In Jack of this unit and start playing the music.
English Turntable Operation 1. Rotate the On/Off Volume Knob to turn on the power. 2. Set the Function Switch to PHONO/TAPE (PH/TA) position. Note: If a tape is inserted the tape will play instead of the turntable. 3. Set the Speed Switch accordingly. 4. Place the record on the turntable. Use the 45 RPM Adapter if necessary. 5. Remove the stylus protector from the stylus assembly.
English Needle Replacement Removing Needle 1. Gently pull down the front edge of the needle. 2. Pull needle forward. 3. Pull out and remove. Installing Needle 1. Position the needle with its tip facing down. 2. Line up the back of the needle with the cartridge. 3. Insert the needle with its front end at a downward angle and gently lift the front of the needle upward until it snaps into place. Radio Operation 1.
English CD Playback Operation 1. Set the Function Switch to CD position. 2. Press the Open/Close button to open the CD tray and put the CD in the tray with the labeled side facing up. 3. Press the Open/Close button again to close the tray. The LED display will show “--“ for a few seconds, then the total number of tracks on the CD. If it is a blank CD or an unrecognizable CD, it will show “00”. Note: MP3 or similar types of digital audio files can not be read by the CD player. 4.
English Cassette Operation 1. Set the Function Switch to PHONO/TAPE (PH/TA) position. 2. Insert the prerecorded cassette through the cassette door and it will start playing automatically. 3. To fast forward, press the cassette Eject/F.F button half way in. To stop fast forwarding and return to the playback mode, press the button again. Note: To rewind the cassette, you would need to eject the tape and flip it over to the other side and fast forward. 4.
English Troubleshooting There is no power • No power at the power outlet. • To help save power consumption, some models will comply with ERP energy saving standard. When there is no audio input for 20 minutes, its powers will automatically cut-off. To turn power back on and resume playing, turn off the main power switch and turn it on again. Power is on, but the platter does not turn • Function switch is not set to Phono/Tape. • Turntable’s drive belt has slipped off.
English FCC Statements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.