1. 2. 3. 4. 5. 6. Please read and keep these instructions handy. Please follow all instructions and heed all warnings. Do not use this jukebox in or near water. Jukebox is for indoor use only. Clean only with a dry cloth. D Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 7. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has 2 blades with one wider than the other.
Remove and save all packing materials from jukebox for warranty purposes. Power Source and Initial Set-Up 1. Remove the AC power adapter and cord from the packing material and connect the AC power cord to the AC adapter. 2. Plug the small end of the adapter into the DC jack on the back of the jukebox. 3. Connect the AC adapter cord into the wall socket. 4. the jukebox is in its final position. 5.
Press the front POWER button located on the right front panel behind the simulated title strips. The simulated title strip panel flips down to reveal all necessary jukebox controls. Volume Control: Press VOL + (UP) or VOL panel to adjust the volume. (DOWN) on the remote or on the front Select from Tuner (for AM/FM Radio) CD Bluetooth (BT) or AUX input by selecting the function displayed in the LED panel. The INPUT function button on the remote control will also change the audio functions.
Nearly all the functions of the jukebox can be operated remotely. For best performance, the remote control should be pointed toward the jukebox and have a clear path for the signals to travel. Ensure the remote has two fresh AAA batteries. Batteries are included with the jukebox but must be installed prior to initial use.
Playing a CD 1. Press the Input button on the remote or front panel to select the CD operation mode. 2. Open the simulated title strip compartment and press the Open/Close button on the remote or on the front panel to open the CD compartment. 3. Insert a disc with the printed side facing up. Press the OPEN/CLOSE button on the remote or on the front panel again to close the compartment, READING is displayed as the CD player scans the contents of the disc. 4. Track No.
3. Press PROGRAM to confirm, display shown stored track No. and next store position. 4. Repeat steps to select and store all desired tracks. FULL is displayed if you attempt to program more than 20 tracks. 5. Press PLAY/PAUSE to play the program 6. You will erase the contents of the memory by: Pressing the POWER button, selecting another INPUT mode or opening closing the CD tray. 1.
RCA input is located on the REAR CONTROL PANEL and can accept a variety of device inputs. No input cord is supplied with the jukebox. The user-supplied cable should match the output of the devi connection for input and connection with the jukebox. Ensure the audio device connected to the AUX connection has a proper volume adjustment for output. The jukebox does not require the use of external speakers.
No Power Ensure jukebox is plugged in to wall socket correctly. Verify the LED is glowing green on the AC adapter attached to the jukebox and wall socket. Ensure wall socket is working properly and not switched off. Ensure AC adapter has all connections tight from the wall socket to the jukebox. Remove the AC adapter from the back of jukebox and plug back and ensure the rear POWER switch is ON. No Sound Check that the volume is turned up by pressing VOL+ button on the remote or front control panel.