C100A C100 Turntable Instruction Manual Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. – 6 p.m., EST, Monday – Friday 1-888-CROSLEY www.crosleyradio.
English Safety Instructions Read and understand this entire manual before using this product. Keep these instructions for future reference. 1. Read Instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating Instructions should be adhered to. 4.
English 19. 20. 21. 22. e. If the product has been dropped or damaged in any way. This indicates a need for service. f. When the product exhibits a distinct change in performance Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
English WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
English Items in this package Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package: Turntable Turntable Lid Turntable Platter Turntable slip mat Headshell 45 RPM adapter Tonearm Counterweight Please contact Crosley customer service if there is any accessory missing from the package. Retain the original packaging materials for exchange or return purposes.
English Product Description 1. 45 RPM Adapter 2. Turntable Platter 3. Turntable Spindle 4. Strobe Dots 5. Power Knob 6. Start/Stop Button 7. Hinges 8. Spare Headshell Holder 9. Tonearm Counterweight 10. Downforce Scale Dial 11. Anti-Skate Adjustment Dial 12. Tonearm Lift 13. Cue Lever 14. Tonearm Rest 15. Hold Down Clip 16. Tonearm 17. Pitch Control 18. Headshell Locking Ring 19. Headshell 20. Speed Selector 21. Phono/Line Jacks 22. Phone/Line Switch 23.
English Initial Setup Essential Setup 1. Place the unit on a flat and level surface. The selected location should be stable and free from vibration. 2. Install the turntable lid to the hinges. 3. Remove the tie-wrap that is holding the tonearm. 4. Install the turntable platter and drive belt accordingly 5. Place the slip mat on top of the turntable platter. 6. Insert the Headshell into the socket at the front of the tonearm, and then turn the Headshell Locking Ring counter-clockwise.
English Turntable Platter and Belt Setup 1. Install the drive belt over the inner ring under the platter and make sure it won’t fall off during the setup. 2. Place the platter through the turntable spindle, then rotate the platter until you see the drive motor pulley through the window at the top right corner. 3. Carefully grab the drive belt and put it around the slot of motor pulley. Phono/Line Switch For increased flexibility of use, this unit has a built-in stereo phono pre-amplifier.
English Turntable Operation 1. 2. 3. 4. Turn the Power Knob clockwise to turn on the power. Set the Speed Switch accordingly. Place the record on the turntable. Use the 45 RPM Adapter if necessary. Remove the stylus protector from the stylus assembly. Note: To avoid stylus damage, make certain the included stylus guard is in place whenever the turntable is being moved or cleaned. 5. Press the Start/Stop Button to start the turntable platter’s rotation. 6. Release the tonearm Hold Down Clip.
English Pitch Control Adjustment There are two sets of strobe dots at the edge of the platter, upper set for AC frequency 50Hz and bottom set for AC frequency 60Hz. When the platter is spinning, observe the strobe dots on the edge of the platter. As illuminated by the light coming from the strobe illuminator, if the appropriate row of strobe dots appears to be stationary, the platter is spinning at the precise rated speed.
English Cartridge Replacement 1. Before replacement, put the stylus protector back on the stylus to prevent damage to the stylus during the replacement process. 2. Turn the headshell locking ring clockwise to release the headshell and remove it from the tonearm. 3. Carefully remove the wire leads from the original cartridge 4. Loosen the two screws on the headshell that are securing the cartridge and then remove the original cartridge. 5. Mount the new cartridge to the headshell and tighten it lightly.
English Troubleshooting There is no power No power at the power outlet. To help save power consumption, some models will comply with ERP energy saving standard. When there is no audio input for 20 minutes, their powers will automatically cut-off. To turn power back on and resume playing, turn off the power and turn it on again. Power is on, but the platter does not turn Turntable mode is not selected. Turntable’s drive belt is not installed or has slipped off.