PART LIST Leg Shelf Frame |Top Shelf Frame| Glass Shelf | Top Glass Shelf 4 pcs 4 pcs 1pc 4 pcs 1pc HARDWARE LIST Bolt Allen Wrench | Safety Strap Kit 42 pes {Extra 2) 1pc 1 set
Step 1. Lay 2 down on a flat surface. Insert top shelf and all shelf into brackets of the Attach remaining 2 by inserting brackets into top shelf and shelf Step 2. Attach top shelf and shelf to the by using bolts (part#1) and Allen will be inserted from the opposite direction for top shelf only. Note: Please do not fully tighten bolts until all of them are in place.
Step 3. Carefully turn unit upright.Install glass and top glass into the frame as shown below.
Step D10 172" SAFETY STRAP KIT WALL ANCHOR HOOK SCREW BOLT SAFETY WALL STRAP 1ST 1PC PCS 1PC 1PC 1PC SAFETY WALL STRAP INSTALLATION Note: It is highly recommended to install this safety strap kit to prevent tipping, damage and/or injury. 1) Insert bolt(D) through hook(B) and using a Philips screwdriver, attach it to the prevailed hole in the top shelf of the frame. 2) Drill a 11/32" hole in the wall where this unit will be secured.