PART LIST Top Panel Upper Left Panel |Upper Right Panel Top Shelf Middle Panel 1PC 1PC 1PC 1PC 1PC Left Back Panel |Right Back Panel | Lower Left Panel |Lower Right Panel| Bottom Shelf 1PC 1PC 1PC 1PC 1PC K L Bottom Panel Door Panel 1PC 1PC
HARDWARE LIST ADDITIONAL TOOLS (Not Provided) Note: It is not recommended to use power tails during assembly. / Phillips Head Screwdriver Note: Wood dowels are intended for alignment. Additional clearance between wood dowel and per-drilled hole is intentional for ease of assembly.
Step 1. Attach double hooks (part #8) to upper panels (parts B & C) using black short screws (part #11) and fillips head screwdriver. Attach magnets (part #14) to middle panel (part E) using round head screws (part #15) and fillips head screwdriver. #14x2 #15 =0 X4 Step 2. Attach top shelf (part D) to upper right panel (part C) using short bolt (part #2) and Allen wrench (part #5).
Step 3. Attach upper left panel (part B) to assembled unit (parts C & D) using wood dowels (part #1), short bolts (part #2) and Allen wrench (part #5). Step 4. Attach top panel (part A) to upper panels (parts B & C) using wood dowels (part #1), medium bolts (part #3) and Allen wrench (part #5).
Step 5.
Step 7. Attach lower right panel (part |) to assembled unit (parts G & J) using wood dowels (part #1), short bolt (part #2) and Allen wrench (part #5) . Step 8. Attach left back panel (part F) to assembled unit (parts G & J) using wood dowels (part #1), short bolt (part #2) and Allen wrench (part #5).
Step 9. Attach lower left panel (part H) to assembled unit (parts F & J) using wood dowels (part #1), short bolt (part #2) and Allen wrench (part #5). #1 ome Step 10.
Step 11. Attach bottom panel (part K) to assembled unit (parts using wood dowels (part #1), short bolts (part #2), long bolts (part #4) and Allen wrench (part #5). Dem Step 12. Attach hinges (part #9) and safety hinges (part #12) to door panel (part L) using zinc screws (part #10), screws (part #13) and fillips head screwdriver. #1128\
Step 13. Carefully turn unit upright. Attach door panel (part L) to lower panels (parts H & 1) using zinc screws (part #10), screws (part #13) and fillips head screwdriver. Attach handle (part #6) to door panel (part L) using round head bolts (part #7) and fillips head screwdriver.
5/8"x #3xD8 $4xD8 Safety Strap | Wall Anchor Bracket Short Screw | Long Screw | Safety Wall Kit Strap 18ET 1PC PCS 1PC 1PC 1PC SAFETY WALL STRAP INSTALLATION Note: It is highly recommended to install this safety strap kit to prevent tipping, damage and/or injury. 1. Insert short screw (C) and safety wall strap (E) through bracket (B) and attach to top panel {part A} using fillips head screwdriver. 2. Drill a 11/32" hole where you want to secure the unit.