PART LIST Side Panel Cross Rail Top Panel Shelf PCs PCS 1PC PCS HARDWARE LIST #1 #2 #3 Bolt Allen Wrench Safety Strap Kit 72 PCS (Extra 1) 1PC 1 SET ADDITIONAL TOOLS (Not Provided) Notelet is not recommended to use power tools during assembly.
Step 1. Insert cross rails (part B) into side panel (part A). Step 2. Secure cross rails (part B) and side panel (part A) using bolts (part #1) and Allen wrench (part #2).
Step 5. Place top panel (part C) and shelves (part D) into assembled unit (parts A & B). Step 6. Secure top panel (part C) and shelves (part D) using bolts (part #1) and Allen wrench (part #2). Important: Safety strap kit (part #3) must be installed to prevent tipping, damage and/or injury. NOTE: It is important to adjust levelers once fully assembled and upright. Extend adjustable leveler until it's firmly in contact with the floor.
Safety Strap Kit | Wall Anchor Washer Short Screw | Long Screw |Safety Wall Strap 1 SET 1PC PCS 1PC 1PC 1PC D8 3/4" SAFETY WALL STRAP INSTALLATION Note: It is highly recommended to install this safety strap kit to prevent tipping, damage and/or injury. 1. Insert short screw {C) through washer (B) and safety wall strap (E) and attach to top panel {part C) using fillips head screwdriver. 2. Drill a 11/32" hole where you want to secure the unit.