Electric DC Air Pump Questions? Scan code to chat. Manufactured for: Crew & Axel Manufactured in: Guangdong Province, China Batch #:212021 help@crewaxel.
ELECTRIC AIR PUMP Catalogue I Product Introduction .....................................1 II List of Accessories.......................................... . 1 VII. Troubleshooting Issue Inspection Solution The pump isn’t starting 1. The power source is not plugged in properly. . 1. Make sure that the power wire is plugged in the 12V DC socket. 2. Change the fuse. 3. Cool the motor and restart it. 4.
HT-785 HT-785 Warning: Before using, please check the cigarette lighter socket to 8 6 7 1 Inflation inlet 2 PSI selection 3 Power button 4 Air inlet 5 DC plug 6 Air t ap 7 Hose 8 Flexible conduit adaptor IV. Safety Instructions make sure that there is no rust or residue inside. Damaged or dirty sockets can cause overheating of the product, or the power source. Always make sure it is clean. Warning: Please follow the instructions of this booklet.
HT-785 When the pressure reaches the set value, the air pump will stop working automatically. After completing the inflation, pull out the DC plug from the 12V DC socket. After pulling out the DC plug, let the pump cool off and store in a dry and cool place. Thank you for purchasing your new Crew & Axel electric pump. You are one step closer to enjoying hassle and pain free pumping! HT-785 is an electric air pump that can inflate paddle boards, tents, kayaks, boats etc.
