Crestron DMPS-100-C/DMPS-200-C/ DMPS-300-C/DMPS-300-C-AEC DigitalMedia™ Presentation Systems Operations Guide
Important Safety Instructions • • • • • • • • • • • • • • • • • • Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Regulatory Compliance This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc. As of the date of manufacture, the DMPS-100-C, DMPS-200-C, DMPS-300-C, and DMPS-300-C-AEC have been tested and found to comply with specifications for CE marking. Federal Communications Commission (FCC) Compliance Statement This device complies with part 15 of the FCC Rules.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation Systems Contents DigitalMedia Presentation Systems: DMPS-100-C/DMPS-200-C/ DMPS-300-C/DMPS-300-C-AEC 1 Introduction ............................................................................................................................... 1 Features and functions ................................................................................................. 1 Applications...............................................................
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System DigitalMedia Presentation Systems: DMPS-100-C/DMPS-200-C/DMPS-300-C/ DMPS-300-C-AEC Introduction The DMPS-100-C, DMPS-200-C, DMPS-300-C, and DMPS-300-C-AEC systems from Crestron® are complete, high-definition presentation control and signal routing solutions for classrooms, boardrooms, lecture halls, and videoconference rooms.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC Features and Functions (Continued) • • • • • • • • • • • • • • • • • • • • • • • • • • • Features auto-detecting, auto-switching inputs for all types of video and audio sources Includes built-in 2-channel (DMPS-100-C), 4-channel (DMPS-200-C), or 6-channel (DMPS-300-C and DMPS-300-C-AEC) gated microphone mixing with DSP Includes full-bandwidth, fully-adaptive acoustic echo cancellation on each mic input (DMPS-300-C-AEC only) Allows d
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System No Programming Required (DMPS-100-C Only) Installing the DMPS-100-C is easy, fast, and affordable. There is no programming required to deliver a fully-functional presentation system–just select the input sources and display device, add lighting control and other features, and the job is done. Configuring and controlling the complete system is enabled using the TSW-750-B PAK 7” tabletop touch screen.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC Supporting wire lengths up to 330 feet (100 meters), DM 8G+ can also provide an ideal interface to a central DigitalMedia switcher as part of a larger multiroom or room-combining system. DM 8G+ requires just one CAT5e wire run to each location, transporting high-definition video, audio, and Ethernet for each device without compromise.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System Professional Audio DSP Each analog audio output on the DMPS-100/200/300-C includes its own digital signal processor, allowing each output to be optimized to feed a power amplifier, codec, recorder, or assistive listening system. In addition to real-time adjustable volume, bass, treble, and mute controls, each DSP provides 10-band graphic equalization, 2band parametric equalization, and 85 ms speaker delay adjustment.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC Auto-Locking Technology Crestron Auto-Locking technology enables super fast signal switching by instantaneously configuring every device in the signal path, including DM transmitters, DM receivers, and scalers, as soon as the signal hits the first device.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System Applications The following diagram shows a DMPS-300-C in a video conferencing application. DMPS-300-C in a Video Conferencing Application Operations Guide – DOC.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC Internal Block Diagram The following diagrams represent the audio and video switching functions of the DMPS-300-C and the DMPS-300-C-AEC. DMPS-300-C Audio Block Diagram 8 • DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System DMPS-300-C-AEC Audio Block Diagram Operations Guide – DOC.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC DMPS-300-C and DMPS-300-C-AEC Video Block Diagram Specifications Specifications for the DMPS-100/200/300-C are listed in the following table. NOTE: In the following table, references to AEC controls and specifications are relevant only to the DMPS-300-C-AEC.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System DMPS-100/200/300-C Specifications (Continued) SPECIFICATION DETAILS Communications Ethernet ® 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, Private Network mode, SSL, SNMP, IPv4, RSTP, SMTP e-mail client, web server; Installer setup via Crestron Toolbox Cresnet Cresnet master mode DigitalMedia DM 8G+, HDCP, EDID, CEC, PoDM, HDBaseT compliant HDMI HDMI, HDCP,
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC DMPS-100/200/300-C Specifications (Continued) SPECIFICATION DETAILS Video (Continued) Input Resolutions HDMI and HDBaseT, Progressive Input Resolutions HDMI and HDBaseT, Interlaced Input Resolutions RGB 640 x 480 @ 60 Hz 720 x 480 @ 60 Hz (480p) 720 x 576 @ 50 Hz (576p) 800 x 600 @ 60 Hz 848 x 480 @ 60 Hz 852 x 480 @ 60 Hz 854 x 480 @ 60 Hz 1024 x 768 @ 60 Hz 1024 x 852 @ 60 Hz 1024 x 1024 @ 60 Hz 1280 x 720 @ 50 Hz (720p50) 128
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System DMPS-100/200/300-C Specifications (Continued) SPECIFICATION DETAILS Video Input Resolutions RGB (Continued) 1440 x 900 @ 60 Hz 1600 x 1200 @ 60 Hz 1680 x 1050 @ 60 Hz 1920 x 1080 @ 50 Hz (1080p50) 1920 x 1080 @ 60 Hz (1080p60) 1920 x 1200 @ 60 Hz 2048 x 1152 @ 60 Hz Input Resolutions Component 480i, 576i, 480p, 576p, 720p50, 720p60, 1080p24,1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines), 1080p60 Input Resolutions C
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC DMPS-100/200/300-C Specifications (Continued) SPECIFICATION DETAILS Audio (Continued) Switcher/Mixer (DMPS-300-C) 6-channel gated mic mixer with DSP, auto-detecting multiformat digital/analog source inputs, DigitalMedia 8G+ inputs, 7 x 7 stereo source switcher, 7 x 4 multichannel source switcher, analog, and HDMI outputs, DM 8G+ outputs, independent 6-channel mic + source mixer per output, independent stereo DSP per analog output,
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System DMPS-100/200/300-C Specifications (Continued) SPECIFICATION DETAILS Audio Typical of Microphone Input Channels (Continued) AEC (DMPS-300-C-AEC) Enable/Disable AEC High-Pass Filter Enable/Disable at 80 Hz AEC Double-Talk Suppression 0.0 to -50.0 dB AEC Noise Cancellation 0.0 to -50.0 dB AEC Automatic Gain Control 0.0 to -50.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC DMPS-100/200/300-C Specifications (Continued) SPECIFICATION DETAILS Audio Typical of Analog Line Outputs with DSP (Continued) Codec 1 – 2 (DMPS-300-C-AEC) -80.0 to +10 dB level adjustment range plus mute and balance (Codec 1 available at Program Out and Aux 2 out only, Codec 2 available at Program Out and Aux 1 out only Master Volume -80.0 to +10 dB level adjustment range, plus mute Mixer Presets 1 through 5 Bass ±12.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System DMPS-100/200/300-C Specifications (Continued) SPECIFICATION DETAILS Audio AEC Reference Output (Internal) (Continued) Treble ±12.0 dB Equalization 10-band graphic + 2-band parametric GEQ Center Frequencies 31.5 Hz, 63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz GEQ Gain ±12.0 dB per band GEQ Presets 1 through 10 PEQ Center Frequencies 5 Hz to 24 kHz per band PEQ Gain -36.0 to +24.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC DMPS-100/200/300-C Specifications (Continued) SPECIFICATION DETAILS Audio (Continued) Stereo Amplified Output (Same Signal As Program Output) Output Power, 4/8 Ohms 20 watts RMS per channel at 8 ohms, 4 ohms tolerant Output Power, 70/100 V 40 watts RMS Frequency Response 20 Hz to 20 kHz ±1 dB @ 20 watts into 8 ohms 100 Hz to 20 kHz ±2.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System DMPS-100/200/300-C Specifications (Continued) SPECIFICATION DETAILS Available Accessories (Continued) CNXRMIRD IR Receiver CRESNET Cresnet Control Cable Crestron App Control App for Apple iOS Crestron Mobile Pro ® ® Control App for iPhone, iPad, and Android Devices Crestron App for ® Samsung Smart TV Control App for Samsung Smart TV CSP-LIR-USB IR Learner DM-8G-CONN-100 DigitalMedia 8G Cable Connectors DM-8G-CONN-WG
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC Physical Description This section provides information on the connections, controls, and indicators available on the DMPS-100/200/300-C. DMPS-300-C Physical View DMPS-100/200/300-C Overall Dimensions (Side View) 20 • DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System DMPS-100-C Dimensions (Front View) DMPS-100-C (Rear View) DMPS-200-C Dimensions (Front View) Operations Guide – DOC.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC DMPS-200-C (Rear View) DMPS-300-C Dimensions (Front View) DMPS-300-C (Rear View) 22 • DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System NOTE: In the following table, the reference designation and quantity of several of the connectors and indicators vary between the DMPS-100/200/300-C models. Refer to the previous illustrations and the description in the table for clarification.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation Systems Connectors, Controls, and Indicators (Continued) 1 # CONNECTORS, CONTROLS, AND INDICATORS DESCRIPTION 17 OUTPUTS (3) Push buttons and red LEDs, select outputs 1, PROG, AUX 1 destination(s), for DMPS-100-C (5) Push buttons and red LEDs, select outputs 1 – 2, PROG, AUX 1 – 2 destination(s), for DMPS-200-C (7) Push buttons and red LEDs, select outputs 1 – 4, PROG, AUX 1 – 2 destination(s), for DMPS-300-C 18 COMPUTER Pin 4 Pin 3
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System Connectors, Controls, and Indicators (Continued) 1 # CONNECTORS, CONTROLS, AND INDICATORS DESCRIPTION 23 RELAY (1) 8-pin 3.5 mm detachable terminal block; Comprises (4) normally open, isolated relays; Rated 1 amp, 30 volts ac/dc; MOV arc suppression across contacts 24 25 (2) for DMPS-100-C; (4) for DMPS-200-C; (6) for DMPS-300-C: 5-pin 3.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC Connectors, Controls, and Indicators (Continued) 1 # CONNECTORS, CONTROLS, AND INDICATORS DESCRIPTION 27 SPEAKER OUTPUT (2) 2-pin 7.62 mm 15 A detachable terminal blocks; 4 – 8 ohm stereo speaker level audio output; Wire size: Terminals accept up to 14 AWG Output power: 20 W RMS per channel stereo at 8 ohms, 4 ohms tolerant; Driven by program audio output NOTE: 4 ohms/8 ohms and 70/100 V outputs are mutually exclusive.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System Connectors, Controls, and Indicators (Continued) 1 # CONNECTORS, CONTROLS, AND INDICATORS DESCRIPTION 34 AUX OUT (1) for DMPS-100; (2) for DMPS-200 and DMPS-300: 5-pin 3.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation Systems Connectors, Controls, and Indicators (Continued) # 40 1 CONNECTORS, CONTROLS, AND INDICATORS DESCRIPTION DM INPUT Not present on DPMS-100, (1) for DMPS-200, (2) for DMPS-300: 8-pin RJ-45 female, shielded; DM 8G+ inputs, capable of supplying power over 7 DM ; Connects to DM 8G+ output of a DM transmitter or other DM device via CAT5e or Crestron 8 DM-CBL-8G cable Green LED Amber LED Pin 8 Pin 1 (2) LEDs, green LEDs indicate
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System 5. The RGB inputs can accept component, composite, and S-video signals via direct interface to Crestron MPS Series products, or through an appropriate adapter (not included). Input sync detection is not provided for composite or S-video signal types through the RGB connection. 6. Refer to the following table for the RGB IN connector pinouts.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC Setup Network Wiring When wiring the network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. • For DigitalMedia CAT wiring, use DM-CBL DigitalMedia cable. Up to two DM Repeaters (model DM-DR, sold separately) may be required. Refer to the Crestron DigitalMedia Design Guide (Doc. 4546) at www.crestron.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System Installation Ventilation The DMPS-100/200/300-C should be used in a well-ventilated area. The venting holes should not be obstructed under any circumstances. To prevent overheating, do not operate this product in an area that exceeds the environmental temperature range listed in the table of specifications. Consider using forced air ventilation to reduce overheating.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC To install the ears, use the following procedure: CAUTION: To prevent equipment damage, use only the rack ears Crestron provides for this device. 1. There are screws that secure each side of a DMPS-100/200/300-C top cover. Using a #1 or #2 Phillips screwdriver, remove the three screws closest to the front panel from one side of the unit. Refer to the diagram following step 3 for a detailed view. 2.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System Foot Placement for the DMPS-100/200/300-C NOTE: No more than two DMPS-100/200/300-C devices should be stacked. Hardware Hookup Connect the Device Make the necessary connections as called out in the illustration that follows this paragraph. Refer to “Network Wiring” on page 30 before attaching the 4-position terminal block (NET) connectors. Apply power after all connections have been made.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC Hardware Connections for the DMPS-100-C Hardware Connections for the DMPS-200-C 34 • DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System Hardware Connections for the DMPS-300-C/300-C-AEC NOTE: Tie all source and device grounds to the ground terminal. Ensure the unit is properly grounded by connecting the chassis ground lug to an earth ground (building steel). NOTE: To prevent overheating, do not operate this product in an area that exceeds the environmental temperature range listed in the table of specifications.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation Systems Typical Balanced/Unbalanced Inputs Balanced Input L Unbalanced Input R Shield Source L Source R L + Source L + Source R R +-G+- +-G++ Jumpers Shield + Shield Typical Balanced/Unbalanced Outputs Balanced Output L Unbalanced Output R +-G+- L R +-G+- Shield + + Label the Buttons Right + AMP Left Right AMP + Left Use Crestron Engraver software to print custom labels for the DMPS-100/200/300-C front panel
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade it is necessary to establish communication. Once communication has been established, files (for example, programs or firmware) can be transferred to the control system (or device).
DigitalMedia Presentation Systems TCP/IP Crestron DMPS-100/200/300-C/300-C-AEC Ethernet Communication The DMPS-100/200/300-C connects to PC via Ethernet: 1. Establish communication between DMPS-100/200/300-C and PC. 2. Use the Device Discovery Tool (click the icon) in Crestron Toolbox to detect all Ethernet devices on the network and their IP configuration. The tool is available in Toolbox version 1.15.143 or later. 3. Click on the DMPS-100/200/300-C to display information about the device.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System Static IP Address Configuration of DMPS-100/200/300-C Inputs/Outputs DMPS-100/200/300-C INPUTS/OUTPUTS IP ADDRESS DMPS-100/200/300-C (main address) 192.168.1.100 Audio Board No IP address Video Board (main + 1) 192.168.1.101 DMIn 6 = Video board + slot# = (main +2) + 6 = main + 7 192.168.1.107 DMIn 7 = Video board + slot# = (main +1) + 7 = main + 8 192.168.1.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC Configuration and Operation The DMPS-100/200/300-C can be used for audio and video switching without any programming required. This is ideal for those that need a basic audio-video switching system. Prior to operation, the DMPS-100/200/300-C must be configured for use. Configuration The DMPS-100/200/300-C is configured using the built-in “Setup Menu”. Access the “Setup Menu” Access the “Setup Menu”: 1.
Crestron DMPS-100/200/300-C/300-C-AEC “Setup Menu” Structure DigitalMedia Presentation System The following diagram displays the “Setup Menu” structure of the DMPS-100/200/300-C. DMPS-100/200/300-C “Setup Menu” Structure SETUP MENU AUDIO SETUP VIDEO SETUP NETWORK SETUP CONTROL SETUP INPUT SIG. TYPE INPUT NAMES IP ADDRESS BACKLIGHT PROGRAM OUTPUT INPUT TYPES SUBNET MASK PASSWORD AUX. 1 OUTPUT OUTPUT NAMES DEFAULT ROUTER INFO AUX.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC Input Signal Type The Input Sig. Type section of the “Audio Setup” menu is used to set the input signal types to the AUD IN 1 through AUD IN 5 connectors as Auto, HDMI, or Analog. NOTE: For inputs 3, 4, and 5, there is no audio output if the audio input type is set to HDMI, and the video input type is set to something other than HDMI. Access Input Signal Types Access input signal types: 1.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System Program Output The Program Output section of the “Audio Setup” menu is used to set the program output source mix, bass, treble, program delay, minimum volume, maximum volume, startup volume, and stereo/mono settings. Access the “Program Output” Menu Set the Program Source Mix Access the “Program Output” menu: 1. Access the “Audio Setup” menu as described on page 41. 2.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC Adjust the program bass level with the and buttons. NOTE: While adjusting the program bass level, the program volume level can be adjusted by turning the VOLUME control clockwise to raise the volume, or counterclockwise to lower the volume. When adjusting the volume, the display changes to indicate the volume level. 3. Set the Program Treble Level Press MENU or ENTER to save changes and return to the previous screen.
Crestron DMPS-100/200/300-C/300-C-AEC Set the Program Minimum Volume DigitalMedia Presentation System The “Prog. Min Volume” menu is used to set the lowest volume level of the program output. Set the program minimum volume level: 1. Access the “Program Output” menu as described on page 43. 2. Press the or buttons until Min Volume is displayed on the LCD and press ENTER to display the “Prog Min Volume” menu. “Prog. Min Volume” Menu 3.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC “Prog. Startup Vol.” Menu 3. Adjust the program startup volume level with the and buttons. The highest program startup volume setting is 100%. NOTE: While adjusting the program startup volume level, the program volume level can be adjusted by turning the VOLUME control clockwise to raise the volume, or counterclockwise to lower the volume. When adjusting the volume, the display changes to indicate the volume level. 4.
Crestron DMPS-100/200/300-C/300-C-AEC Set the Auxiliary Output Source Mix DigitalMedia Presentation System 2. Press the or buttons until the Aux. 1 Output or Aux. 2 Output is displayed on the LCD, and press ENTER to display the “Aux. 1 Output” or “Aux. 2 Output” menu. 3. To return to the “Audio Setup” menu, press MENU. Set the auxiliary output source mix: 1. Access the “Aux. 1 Output” or “Aux. 2 Output” menu as described above. 2.
DigitalMedia Presentation Systems Set the Auxiliary Output Treble Level Crestron DMPS-100/200/300-C/300-C-AEC Set the auxiliary output treble level: 1. Access the “Aux. 1 Output” or “Aux. 2 Output” menu as described on page 46. 2. Press the or buttons until Treble is displayed on the LCD and press ENTER to display the “Aux. 1 Treble” menu. The current treble level is displayed. “Aux. 1 Treble” Menu 3. Adjust the auxiliary output treble level with the and buttons.
Crestron DMPS-100/200/300-C/300-C-AEC 3. DigitalMedia Presentation System Adjust the auxiliary output minimum volume level with the and buttons. The highest auxiliary output minimum volume setting is 50%. NOTE: While adjusting the auxiliary output minimum volume level, the auxiliary output volume level can be adjusted by turning the VOLUME control clockwise to raise the volume, or counterclockwise to lower the volume. When adjusting the volume, the display changes to indicate the volume level. 4.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC Input Compensation The input compensation level of each analog audio input can be set from the DMPS-100/200/300-C’s front panel. The line outputs are not affected by changes made to the input compensation level. Set the Input Compensation Level Set the input compensation level for an input: 1. Access the “Audio Setup” menu described on page 41. 2.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System press ENTER to display the “Microphones” menu. 3. Set Microphone Input Gating To return to the “Audio Setup” menu, press MENU. Microphone input gating can be individually set on each of the microphone inputs. Switch microphone gating on or off: 1. Access the “Microphones” menu as described above. 2. Press the or buttons to display each of the gating choices. Press ENTER to display the desired microphone gating control display.
DigitalMedia Presentation Systems Adjust Microphone Input Gain Crestron DMPS-100/200/300-C/300-C-AEC The gain for each microphone input can be individually set. Adjust the gain of a microphone input: 1. Access the “Microphones” menu as described on page 50. 2. Press the or buttons to display each of the mic gain choices. Press ENTER to display the desired microphone gain control display. “Mic 1 Gain” Menu 3. Gain can be adjusted between 0% and 100%.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System the character to be deleted and press the button under Del. To insert a space, position the cursor where the space is to be inserted and press the button under Ins. Select Input Type 5. Press ENTER to save the new name and return to the “Sel. Input to Name” menu or press MENU to cancel the operation and return to the “Sel. Input to Name” menu. 6. After all inputs have been named, press MENU to return to the “Video Setup” menu.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC and press ENTER. The cursor is placed after the last character in the output name. Output Name Change Screen 4. Turn the VOLUME control clockwise or counterclockwise (or press the or buttons) to select a new letter (uppercase or lowercase) or number. Move the cursor by pressing the buttons under the < or > symbols. Each output name can be up to 14 characters in length.
Crestron DMPS-100/200/300-C/300-C-AEC Set the Subnet Mask DigitalMedia Presentation System 4. Press ENTER to move the cursor to the next section of the address. To change a different section, press the button under the section to be changed. 5. Repeat the previous two steps until the entire IP address is set. 6. To save the new address and return to the “Network Setup” menu, move the cursor to the right-most section and press ENTER.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC cursor to the right-most section and press ENTER. To cancel the operation and return to the “Network Setup” menu, press MENU. Set the DHCP Status The IP address can be obtained from a DHCP server or manually set. For information on manually setting the IP address, refer to “Set the IP Address” on page 54. Set the DHCP status: 1. Access the “Network Setup” menu as described on page 54. 2.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System HostName Change Screen View and Set the Domain Name 4. Turn the VOLUME control clockwise or counterclockwise (or press the or buttons) to select a new letter (uppercase or lowercase) or number. Move the cursor by pressing the buttons under the < or > symbols. The hostname can be up to 64 characters in length. To delete a character, position the cursor under the character to be deleted and press the button under Del.
DigitalMedia Presentation Systems 3. Crestron DMPS-100/200/300-C/300-C-AEC Press MENU to return to the “Network Setup” menu. Control Setup Basic control system operations can be performed from the DMPS-100/200/300-C front panel using the “Control Setup” menu. Access the “Control Setup” Menu Change the Backlight Level Access the “Control Setup” menu: 1. Access the “Setup Menu” as described on page 40. Press the or buttons until Control Setup is displayed on the LCD. 2.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System NOTE: This information can also be viewed using Crestron Toolbox. For more information, refer to the Crestron Toolbox help file. 1. Access the “Control Setup” menu as described on page 58. 2. Press the or buttons until Info is displayed on the LCD and press ENTER to display the “Info” menu. “Info” Menu 3. To view program information, press the button under REMS. “Program Boot Directory” Screen 4.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC 12. To view information on the DMPS-100/200/300-C operating system, press the button under OPS. Operating System Information Screen 13. Press the buttons under the symbols << or >> to view the information that cannot fit on the display. 14. Press the MENU button to return to the “Info” menu. 15. To return to the “Control Setup” menu, press MENU. Review System Messages The DMPS-100/200/300-C stores system messages in a message log.
Crestron DMPS-100/200/300-C/300-C-AEC 3. DigitalMedia Presentation System To set the date, press the button under DATE. The date controls are displayed. Date Controls Screen 4. 5. To set the month, press the button under MO. To set the day, press the button under DAY. To set the year, press the button under YR. A pair of brackets appears around the selected part of the date. Press the or buttons to increase or decrease the value of the selected part of the date. 6.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC “Restore Defaults” Screen (Audio Settings Only) 3. Press the or buttons until Aud. settings only is displayed on the LCD and press ENTER. “Reset all audio?” Confirmation Screen 4. To restore factory default audio settings, press the or buttons until Yes is displayed on the LCD and press ENTER. To cancel, press the or buttons until No is displayed on the LCD and press ENTER. Restore all factory default settings: 1.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System “Front Panel Lock” Controls Screen 3. Press the or buttons to toggle between On and Off. The current setting is indicated with an asterisk (*). 4. Press ENTER to save the desired setting and return to the “Control Setup” menu. Default System Operation The following describes operation of a default system. Turn On the System Turn on the system: 1.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. DMPS-100/200/300-C Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION An unexpected response is received from the control system. Network devices are not communicating with the control system.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System “Passthrough Mode” in the Crestron 2-Series Control Systems Reference Guide (Doc. 6256). System Monitor The System Monitor allows reloading of firmware into the DMPS-100/200/300-C in the event that it cannot be loaded in the normal mode. If the system does not function, perform the following procedure: 1. Disconnect all Crestron USB devices from the PC. 2. On the DMPS-100/200/300-C, press and release the HW-R button.
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC 10. At the Toolbox prompt, type erase and press Enter. The following text appears in Toolbox: Erasing ->25%->50%->75%->100% Done icon and select Firmware… to display the “Firmware” dialog 11. Click the box, then click Browse. 12. Find and select the correct firmware file (.CUZ or .zip) and click Open. 13. In the “Firmware” dialog box, click Send. A “Confirmation” dialog box opens asking if the right file has been selected.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System equation to calculate the cable length value on the equation’s left side. Cable Length Equation Make sure the cable length value is less than the value calculated on the right side of the equation. For example, a Cresnet run using 18 AWG Crestron Certified Wire and drawing 20 watts should not have a length of run more than 333 feet (101 meters). If Cresnet HP is used for the same run, its length could extend to 1250 feet (381 meters).
DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC Future Updates As Crestron improves functions, adds new features, and extends the capabilities of the DMPS-100/200/300-C, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision. Check the Crestron website periodically for manual update availability and its relevance.
Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from Crestron. To obtain warranty service for Crestron products, contact an authorized Crestron dealer. Only authorized Crestron dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 7219E (2031708) 05.14 Specifications subject to change without notice.