Crestron DM-RMC-100-S DigitalMedia 8G™ Fiber Receiver & Room Controller 100 Operations & Installation Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON This device includes an aggregation of separate independent works that are each generally copyrighted by Crestron Electronics, Inc., with all rights reserved.
Regulatory Compliance As of the date of manufacture, the DM-RMC-100-S has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. Federal Communications Commission (FCC) Compliance Statement This device complies with part 15 of the FCC Rules.
Crestron DM-RMC-100-S DigitalMedia 8G™ Fiber Receiver 100 Contents DigitalMedia 8G™ Fiber Receiver & Room Controller 100: DM-RMC-100-S 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Applications..............................................................................................
Crestron DM-RMC-100-S DigitalMedia 8G™ Fiber Receiver 100 DigitalMedia 8G™ Fiber Receiver & Room Controller 100: DM-RMC-100-S Introduction The DM-RMC-100-S provides a one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G™ Fiber receiver and control interface, providing a single HDMI® output along with Ethernet, RS-232 and IR control ports.
DigitalMedia 8G™ Fiber Receiver 100 Crestron DM-RMC-100-S DigitalMedia 8G DigitalMedia 8G provides a one-wire digital AV distribution and control network. Engineered for ultra high bandwidth and ultimate scalability, DM 8G handles uncompressed video beyond high definition with support for HDCP, Deep Color, and 3D, plus high bitrate 7.1 audio formats including Dolby® TrueHD and DTS-HD Master Audio ™, uncompressed multichannel PCM audio, and high-speed Ethernet, all over one simplex multimode fiber.
Crestron DM-RMC-100-S DigitalMedia 8G™ Fiber Receiver 100 Low-Profile Installation The DM-RMC-100-S mounts on a wall, ceiling, or other flat surface. It fits easily behind a flat panel display or above a ceiling-mounted projector. All connections and LED indicators are positioned on the sides, ensuring optimal access and visibility for a clean, serviceable installation.
DigitalMedia 8G™ Fiber Receiver 100 Crestron DM-RMC-100-S Specifications Specifications for the DM-RMC-100-S are listed in the following table.
Crestron DM-RMC-100-S DigitalMedia 8G™ Fiber Receiver 100 DM-RMC-100-S Specifications (Continued) SPECIFICATION DETAILS Video Input Resolutions (Continued) 720 x 480 @ 30 Hz (480i), 720 x 576 @ 25 Hz (576i), 1920 x 1080 @ 25 Hz (1080i25), 1920 x 1080 @ 30 Hz (1080i30), plus any other resolution allowed by HDMI up to 165 MHz pixel clock Interlaced Output Resolutions Matched to input Audio Input Signal Type DM 8G Fiber Output Signal Type HDMI Formats Dolby Digital, Dolby Digital EX, Dolby ® Digi
DigitalMedia 8G™ Fiber Receiver 100 Crestron DM-RMC-100-S DM-RMC-100-S Specifications (Continued) SPECIFICATION DETAILS Dimensions Height 6.09 in (155 mm) Width 5.60 in (143 mm) Depth 1.
Crestron DM-RMC-100-S DigitalMedia 8G™ Fiber Receiver 100 Physical Description This section provides information on the connections, controls and indicators available on your DM-RMC-100-S. DM-RMC-100-S Physical View (Front View) DM-RMC-100-S Physical Views (Left and Right Side Views) Operations & Installation Guide – DOC.
DigitalMedia 8G™ Fiber Receiver 100 Crestron DM-RMC-100-S DM-RMC-100-S Overall Dimensions (Front View) 5.60 in (143 mm) 5.55 in (141 mm) 4.63 in (118 mm) 5.44 in (139 mm) DM-RMC-100-S Overall Dimensions (Bottom View) 1.00 in (26 mm) 5.87 in (150 mm) 8 • DigitalMedia 8G™ Fiber Receiver 100: DM-RMC-100-S Operations & Installation Guide – DOC.
Crestron DM-RMC-100-S DigitalMedia 8G™ Fiber Receiver 100 DM-RMC-100-S Overall Dimensions (Left and Right Side Views) 6 1 2 7 8 3 4.95 in (126 mm) 6.09 in (155 mm) 9 4 10 5 11 12 Connectors, Controls & Indicators # CONNECTORS1, CONTROLS & INDICATORS 1 HDMI OUT LED 2 HDMI OUT 3 COM (1) 5-pin 3.5 mm detachable terminal block, bidirectional RS-232 port; Up to 115.2k baud, hardware and software handshaking support 4 IR (1-2) (1) 4-pin 3.
DigitalMedia 8G™ Fiber Receiver 100 Crestron DM-RMC-100-S Connectors, Controls & Indicators (Continued) # CONNECTORS1, CONTROLS & INDICATORS 5 LAN4 PIN 1 AMBER LED PIN 8 GREEN LED 6 DESCRIPTION (1) 8-pin RJ-45 female, shielded, with two LED indicators; 10BASE-T/100BASE-TX Ethernet port, Green LED indicates Ethernet link status; Amber LED indicates Ethernet activity PIN SIGNAL PIN SIGNAL 1 2 3 4 TX + TX RX + N/C 5 6 7 8 N/C RX N/C N/C (1) 6-32 screw, chassis ground lug (1) SC female opti
Crestron DM-RMC-100-S DigitalMedia 8G™ Fiber Receiver 100 Setup Network Wiring When wiring the DM network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. CAUTION: Failure to use Crestron power supplies could cause equipment damage or void the Crestron warranty. • Provide sufficient power to the system. • For DigitalMedia 8G Fiber wiring, CresFiber 8G is recommended.
DigitalMedia 8G™ Fiber Receiver 100 Crestron DM-RMC-100-S Installation To prevent overheating, do not operate this product in an area that exceeds the environmental temperature range listed in the table of specifications. The DM-RMC-100-S mounts on a flat surface such as a wall or ceiling. The DM-RMC-100-S can also be mounted on a rack rail. Mounting on a Flat Surface To mount the DM-RMC-100-S on a flat surface such as a wall or ceiling, use four mounting screws (not included).
Crestron DM-RMC-100-S Rack Mounting DigitalMedia 8G™ Fiber Receiver 100 To mount the DM-RMC-100-S on the left or right rail of a rack, use two rack mounting screws (not included). The following illustration shows mounting of the DM-RMC-100-S on the right rail of a rack. Mounting the DM-RMC-100-S on Rack Rail (Right Rack Rail Shown) Rack Mounting Screws (Not Included) Hardware Hookup Make the necessary connections as called out in the illustrations on the following page.
DigitalMedia 8G™ Fiber Receiver 100 Crestron DM-RMC-100-S Hardware Connections for the DM-RMC-100-S (Left Side) HDMI OUT: Digital Video/Audio Output COM: To RS-232 Device IR: To IR Controllable Device LAN: 10BASE-T/100BASE-TX Ethernet to Local Network Device Hardware Connections for the DM-RMC-100-S (Right Side) Ground DM IN MMF/SC: From DM Switcher, Transmitter, or Other DM Device 24 VDC: From Power Pack (Included) 14 • DigitalMedia 8G™ Fiber Receiver 100: DM-RMC-100-S Operations & Installation
Crestron DM-RMC-100-S DigitalMedia 8G™ Fiber Receiver 100 Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron Web site. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at http://support.crestron.com. First-time users will need to establish a user account.
DigitalMedia 8G™ Fiber Receiver 100 Crestron DM-RMC-100-S Locating the DM-RMC-100-S in the Device Library The system tree of the control system displays the DM-RMC-100-S in the appropriate slot with a default IP ID as shown in the following illustrations. In the first example, the DM-RMC-100-S is used with the DMCO-40 output card in a DM-MD8X8 switcher. In the second example, the DM-RMC-100-S is used with the C2ENET-2 card in an Ethernet slot on the control system.
Crestron DM-RMC-100-S DigitalMedia 8G™ Fiber Receiver 100 C2ENET-2 Device, Slot 8 (Using Ethernet Slot on Control System) 2. If additional DM-RMC-100-S devices are to be added, repeat step 1 for each device. Each DM-RMC-100-S device is assigned a different IP ID. 3. If necessary, double-click a device to open the “Device Settings” window and change the IP ID. “Device Settings: Crestron DM-RMC-100-S” Window NOTE: The ID code specified in the SIMPL Windows program must match the IP ID of each unit.
DigitalMedia 8G™ Fiber Receiver 100 Crestron DM-RMC-100-S Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade it is necessary to establish communication. Once communication has been established, files (for example, firmware) can be transferred to the device. Finally, the IP table of the device can be configured.
Crestron DM-RMC-100-S DigitalMedia 8G™ Fiber Receiver 100 USB Communication via DM Switcher PC Running Crestron Toolbox DM Switcher USB DM-RMC-100-S DM 8G Fiber To establish USB communication between the PC and the DM switcher: Via LAN Port 1. Use the Address Book in Crestron Toolbox to create an entry using the expected communication protocol (USB).
DigitalMedia 8G™ Fiber Receiver 100 4. Crestron DM-RMC-100-S (Optional) If additional changes to TCP/IP settings are desired, do the following: a. Assign an IP address, IP mask, and default router for the DM-RMC-100-S via the Crestron Toolbox (Functions | Ethernet Addressing). b. Close the “System Info” window. c. In Crestron Toolbox, change the Address Book entry for the DM-RMC-100-S so that it uses the IP address assigned in step 4a. d.
Crestron DM-RMC-100-S DigitalMedia 8G™ Fiber Receiver 100 IP Configuration If the DM-RMC-100-S is used in a standalone configuration (i.e., not connected to a DM switcher), use Crestron Toolbox to create the IP table entry of the DM-RMC-100-S. NOTE: If the DM-RMC-100-S is connected to a DM switcher, the IP table entry of the DM-RMC-100-S is created automatically. 1. Use the Device Discovery Tool to find the IP address of the DM-RMC-100-S.
DigitalMedia 8G™ Fiber Receiver 100 Crestron DM-RMC-100-S Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. DM-RMC-100-S Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Device is not communicating with the network. Use Crestron Toolbox to poll the network. Verify network connection to the device.
Crestron DM-RMC-100-S DigitalMedia 8G™ Fiber Receiver 100 DM-RMC-100-S Troubleshooting (Continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION LAN LED does not illuminate green. LAN network cable is not connected to the LAN port or to the 10BASE-T/ 100BASE-TX compatible device. Verify LAN network cable connection to the LAN port and to the compatible network device. LAN network cable is not the proper type. Verify that network cable complies with EIA/TIA 568 and the CAT5 specification.
DigitalMedia 8G™ Fiber Receiver 100 Crestron DM-RMC-100-S Future Updates As Crestron improves functions, adds new features and extends the capabilities of the DM-RMC-100-S, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision. Check the Crestron Web site periodically for manual update availability and its relevance.
Crestron DM-RMC-100-S DigitalMedia 8G™ Fiber Receiver 100 Return and Warranty Policies Merchandise Returns / Repair Service 1. 2. 3. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
DigitalMedia 8G™ Fiber Receiver 100 Crestron DM-RMC-100-S GNU General Public License Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed. PREAMBLE The licenses for most software are designed to take away your freedom to share and change it.
Crestron DM-RMC-100-S DigitalMedia 8G™ Fiber Receiver 100 You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee. 2.
DigitalMedia 8G™ Fiber Receiver 100 Crestron DM-RMC-100-S modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6.
Crestron DM-RMC-100-S DigitalMedia 8G™ Fiber Receiver 100 This page is intentionally left blank. Operations & Installation Guide – DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations & Installation Guide – DOC. 7067B (2028765) 02.11 Specifications subject to change without notice.
