Crestron CHV-TSTATRF infiNET™ Thermostat Operations & Installation Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2006 Crestron Electronics, Inc.
Crestron CHV-TSTATRF infiNET™ Thermostat Contents InfiNET™ Thermostat: CHV-TSTATRF 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Specifications .............................................................................................................. 3 Physical Description..........
Crestron CHV-TSTATRF infiNET™ Thermostat InfiNET™ Thermostat: CHV-TSTATRF Introduction Features and Functions • • • • • Wall mount heat/cool thermostat For baseboard, forced air and heat pump HVAC systems Crestron system integration via infiNET™ wireless network ⇒ 2.
infiNET™ Thermostat Crestron CHV-TSTATRF InfiNET™ Thermostat The CHV-TSTATRF is a wireless networked thermostat featuring infiNET wireless technology. The CHV-TSTATRF is designed to be installed easily in place of a conventional type thermostat without requiring additional control network wiring. Although it can be used as a standalone thermostat, the CHV-TSTATRF delivers enhanced functionality as part of a complete Crestron Home® automation system communicating via the infiNET wireless control network.
Crestron CHV-TSTATRF infiNET™ Thermostat Specifications Specifications for the CHV-TSTATRF are listed in the following table. CHV-TSTATRF Specifications SPECIFICATION DETAILS Wireless RF Transceiver Two-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.6 MHz), IEEE 802.15.
infiNET™ Thermostat Crestron CHV-TSTATRF CHV-TSTATRF Specifications (Continued) SPECIFICATION Weight DETAILS 6.7 oz (189.9 g) Available Accessories C2N-MNETGW InfiNET Gateway/Transceiver C2N-MNETRPT InfiNET Repeater 1. Requires setup with Crestron Toolbox™. 2. The latest software versions can be obtained from the Crestron website. Refer to the NOTE following these footnotes. 3. Crestron 2-Series control systems include the AV2 and PRO2.
Crestron CHV-TSTATRF infiNET™ Thermostat CHV-TSTATRF Overall Dimensions (Front and Side Views) 1.03 in (2.60 cm) 5.53 in (14.05 cm) 1 3 4.50 in (11.43 cm) 2 4 5 CHV-TSTATRF Overall Dimensions (Rear View) 3.27 in (8.30 cm) Operations & Installation Guide – DOC.
infiNET™ Thermostat Crestron CHV-TSTATRF CHV-TSTATRF (Connection View, front the front with cover removed) 6 6 Connectors, Controls & Indicators # CONNECTORS, CONTROLS & INDICATORS DESCRIPTION 1 MODE BUTTON* Cycles through available System Modes: OFF, HEAT, AUX HEAT ONLY (for heat pump or dual-fuel systems only) and COOL. 2 FAN BUTTON2 Toggles fan setting between FAN AUTO and FAN ON. 3 RAISE BUTTON Raises the setpoint. 4 LOWER BUTTON Lowers the setpoint.
Crestron CHV-TSTATRF infiNET™ Thermostat Industry Compliance FCC ID: EROCWD1013 Compliance Statement (Part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation. Warning (Part 15.
infiNET™ Thermostat Crestron CHV-TSTATRF Setup Identity Code The MNET ID of the CHV-TSTATRF has been factory set to 01. After an infiNET device is added to an infiNET network, its MNET ID must be changed to a value that can be addressed by the control system program (03 to 20). The MNET IDs of multiple CHV-TSTATRF devices in the same system must be unique. MNET IDs are changed from a personal computer (PC) via the Crestron Toolbox™.
Crestron CHV-TSTATRF infiNET™ Thermostat 7. Insert batteries (included). 8. Turn system power ON. NOTE: Installers should have a strong working knowledge of HVAC systems. Installation view Operations & Installation Guide – DOC.
infiNET™ Thermostat Crestron CHV-TSTATRF Hardware Hookup Make the necessary connections as called out in the illustration that follows this paragraph. Apply power after all connections have been made.
Crestron CHV-TSTATRF infiNET™ Thermostat 2. Place the CHV-TSTATRF in the SETUP mode by doing the following: a. Press and hold the FAN button. b. While the FAN button is being held, press and hold the RAISE and LOWER buttons simultaneously. c. Hold all three buttons for five seconds, after which the unit will enter SETUP mode. 3. Once in SETUP mode, the display will indicate the currently selected “Setup Parameter/Function”.
infiNET™ Thermostat Crestron CHV-TSTATRF 2. Once in SETUP mode, the display will indicate the currently selected “Setup Parameter/Function”. Press and release the MODE button quickly (must be released within one second) to change to the next Parameter/Function in the list. When “UA” is displayed, the CHV-TSTAT is ready to release the gateway. 3. Press either RAISE or LOWER to execute the gateway release function. 4. To exit from SETUP mode, press the FAN button on the CHV-TSTATRF.
Crestron CHV-TSTATRF infiNET™ Thermostat Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at http://support.crestron.com. First-time users will need to establish a user account.
infiNET™ Thermostat Crestron CHV-TSTATRF SIMPL Windows is Crestron’s premier software for programming Crestron control systems. It is organized into two separate but equally important “Managers”. Configuration Manager Configuration Manager is the view where programmers “build” a Crestron control system by selecting hardware from the Device Library.
Crestron CHV-TSTATRF infiNET™ Thermostat C2Net Device, Slot 9 • Additional CHV-TSTATRF devices are assigned different MNET ID numbers as they are added. • If necessary, double click a device to open the “Device Settings” window and change the MNET ID, as shown in the following figure. “CHV-TSTATRF Device Settings” Window • Programming Manager The ID code specified in the SIMPL Windows program must match the MNET ID of each unit.
infiNET™ Thermostat Crestron CHV-TSTATRF Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade it is necessary to establish communication. Establishing Communication Use Crestron Toolbox for communicating with the CHV-TSTATRF; refer to the Crestron Toolbox help file for details.
Crestron CHV-TSTATRF infiNET™ Thermostat • Upgrade CHV-TSTATRF firmware via Crestron Toolbox. ⇒ Establish serial communications with the CHV-TSTATRF and display the “System Info” window. ⇒ Select Functions | Firmware… to upgrade the CHV-TSTATRF firmware. For details on uploading and upgrading, refer to the SIMPL Windows help file or the Crestron Toolbox help file. Operations & Installation Guide – DOC.
infiNET™ Thermostat Crestron CHV-TSTATRF Operation Setup Mode After the CHV-TSTATRF is installed, it is necessary to set it up for a particular heating/cooling system. The choices available on the Setup screens depend on the type of system selected. Place the CHV-TSTATRF in the SETUP mode by doing the following: 1. Press and hold the FAN button. 2. While the FAN button is being held, press and hold the RAISE and LOWER buttons simultaneously. 3.
Crestron CHV-TSTATRF infiNET™ Thermostat NOTE: While in SETUP Mode, a period of one minute with no button activity will cause the CHV-TSTATRF to revert to standard operation. The following table shows the available Setup Parameter/Functions.
infiNET™ Thermostat Crestron CHV-TSTATRF SETUP Mode Parameters/Functions (Continued) PARAMETER/ FUNCTION 1. 2. 3. 4. 5. 6. 7. 8.
Crestron CHV-TSTATRF infiNET™ Thermostat NOTE: Aux Heat Only mode can only be accessed when Heat/Cool Type has been set to “Heatpump” or “Dual-Fuel Heatpump”. When the System mode is set to Heat, the unit will make a “Heat Call” whenever the current setpoint is above the ambient temperature. When the System mode is set to Cool, the unit will make a “Cool Call” whenever the current setpoint is below the ambient temperature. The unit will make a “Fan Call” whenever the Fan setting is ON.
infiNET™ Thermostat Crestron CHV-TSTATRF adjustment is 4 degrees per second (or 4 half degrees per second if “Half Degree Setpoints” is set to true and the Temperature Scale is set to Celsius). LDC Display Operation CHV-TSTATRF LCD Display F C OFF AUTO HOLD H C F A The LCD display on the CHV-TSTATRF will display the current ambient temperature in degrees F or C (if the display is set to Fahrenheit or Celsius respectively), except when the display is being used for other purposes such as Setup.
Crestron CHV-TSTATRF infiNET™ Thermostat The “HOLD” element is displayed whenever the HOLD setting is active. When the CHV-TSTATRF detects a low battery condition (approximately one month of battery life remaining), the display will alternate “Lo” in place of the ambient temperature once per second. Operations & Installation Guide – DOC.
infiNET™ Thermostat Crestron CHV-TSTATRF Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. CHV-TSTATRF Troubleshooting TROUBLE No display Device does not function.
Crestron CHV-TSTATRF infiNET™ Thermostat CHV-TSTATRF Troubleshooting (Continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Cannot change temperature setting The upper or lower temperature limits were reached Heat Setpoint range is 38º to 89ºF (3º to 32ºC) Cool Setpoint range is 59º to 99ºF (15º to 37ºC) or 38º to 99ºF (3º to 37ºC) extended cool mode enabled System cycles too quickly Anticipator setting too low Reprogram anticipator setting (refer to “Setup Mode” which begins on page 18) High t
infiNET™ Thermostat Crestron CHV-TSTATRF List of Related Reference Documents DOCUMENT TITLE 2-Series Control Systems Reference Guide C2N-MNETGW infiNET Gateway/Transceiver Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876].
Crestron CHV-TSTATRF infiNET™ Thermostat Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business entity) and Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, which includes computer software and as applicable, associated media, printed materials and “online” or electronic documentation (the “Software”).
infiNET™ Thermostat Crestron CHV-TSTATRF If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformity with Your valid licenses from Crestron of its authorized agent.
Crestron CHV-TSTATRF infiNET™ Thermostat Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
infiNET™ Thermostat Crestron CHV-TSTATRF This page is intentionally left blank. 30 • infiNET™ Thermostat: CHV-TSTATRF Operations & Installation Guide – DOC.
Crestron CHV-TSTATRF infiNET™ Thermostat This page is intentionally left blank. Operations & Installation Guide – DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations & Installation Guide – DOC. 6490 (2015101) 09.06 Specifications subject to change without notice.
