Brochure

Chem-Crest
®
2003
Heavy-duty industrial strength
ultrasonic liquid detergent concentrate
Description
Chem-Crest 2003 is a heavy duty liquid detergent
concentrate with a broad spectrum of uses on
hard to clean contaminants.. It is useful in many
applications demanding removal of various tough
contaminants from the automotive industry to
general maintenance cleaning to heat exchangers,
as well as others. Chem-Crest 2003 is mildly
inhibited to help prevent flash rusting, and is free-
rinsing.
Substrate Compatibility
Chem-Crest 2003 is safe on various metals, such
as copper and steels, glass, plastics, hard rubber
articles, and ceramics, when used as directed. It
can be used with aluminum for short exposure
periods to remove tough contaminants.
Typical Contaminants Removed
Chem-Crest 2003 is effective on various
contaminants such as oils, greases, particulate
matter, carbon residues, dried on fuel, and crude
fuel residues, as well as general contaminants.
Operating Conditions
Chem-Crest 2003 is typically used at 10% by volume in
ultrasonic applications. Normal operating temperatures:
120 - 180°F, dependent on the material makeup of the
substrate, and the contaminants being removed.
Contact your Crest representative for product-line
specific recommendations. Recommended rinsing water
temperature: 110 - 150°F.
Physical Data
Flash Point: None
Specific Gravity: 1.04
pH: 10% solution = 11.0 +/- 0.6
Solubility in Water: Complete
Volatiles: N/A
**These are typical values and do not constitute
specifications.
Storage Conditions and Disposal Methods
Avoid freezing conditions. Dispose in accordance
with Federal, State, and Local regulations and
procedures.
Safety Precautions
See Safety Data Sheet
Availability
Chem-Crest 2003 is available in cases of (4) x 1-gallon
plastic bottles, 5-gallon pails, 55-gallon containers, and
custom bulk sizes.
For further information on this product, please contact
the Chemical Sales Office at:
Crest Ultrasonics Corp.
18 Graphics Dr
P.O. Box 7266
Ewing, NJ 08628
P: [phone]
F: [phone]
[e-mail]
Crest Ultrasonics maintains sales offices in the United
States, Malaysia, Singapore, Japan, Germany, the United
Kingdom, India, and France.
Our chemicals are blended at our Philadelphia, PA office,
Custom Blends, Inc. – A Division of Crest Ultrasonics.
Disclaimer: All statements, technical information and recommendation contained herein are based on tests or other information
available to us which we believe to be reliable, but the accuracy or completeness thereof is not guaranteed and are made without
representation or warranty. They are presented for your own investigation and verification. Products discussed are sold without
warranty, expressed or implied, in law or fact and upon the condition that purchasers make their own tests to determine the suitability
of such products to their particular purpose. We shall not be liable for any injury, loss or damage direct or consequential, arising out of
use or the inability to use the product. It is the user’s obligation and responsibility to determine that any use of the product or the
information may infringe on patent rights.