Installation Instructions

ManualsBrandsCREE Lighting ManualsElectronics802.15.4 Radio module

Revision A

January 2019

SmartCast

Wireless Integration Module

Available Part Numbers

Part Number

Description

WIM-CMA-OEM SmartCast Wireless Integration Module

Purpose of Document

This document is intended to provide fixture manufacturers with the information needed to properly integrate the

SmartCast

Wireless Integration Module controls with their fixtures in order to provide a SmartCast

enabled fixture that

can integrate with the SmartCast Intelligence Platform™.

Table of Contents

Driver Connection..........................................................................................................2

Physical Mounting Considerations ..............................................................................2

Dimensions...................................................................................................................2

Fascia Plate..................................................................................................................2

Mounting Features .......................................................................................................3

Orientation....................................................................................................................3

Keep Out ......................................................................................................................4

Wiring Considerations ..................................................................................................4

Packaging.......................................................................................................................4

FCC .....................................................................................Error! Bookmark not defined.

Summary of content (5 pages)

PAGE 1
Installation Instructions Revision A January 2019 SmartCast® Wireless Integration Module Available Part Numbers Part Number WIM-CMA-OEM Description SmartCast Wireless Integration Module Purpose of Document This document is intended to provide fixture manufacturers with the information needed to properly integrate the SmartCast® Wireless Integration Module controls with their fixtures in order to provide a SmartCast ® enabled fixture that can integrate with the SmartCast Intelligence Platform™.
PAGE 2
Product Overview The SmartCast® Wireless Integration Module (WIM) is a modular system intended to be mounted onto an existing light fixture or be mounted directly into the ceiling and leverage Cree’s SmartCast™ technology to automate setup, drive data acquisition, enable remote control, and provide energy savings for the user.
PAGE 3
Example Fascia Fascia Snap Features Example Fixture Base Mounting Features The SmartCast Wireless Integration Module is designed to be installed into the fixture from room side and the module includes release features within the snaps so that the module can be removed and replaced if needed. Base Dimensions: Example Base Mount. **Dimensions are in mm. Refer to 3D models for exact dimensions and snap interfaces.
PAGE 4
Keep Out Mounting Thickness:  Suitable for use in mounting thicknesses up to 1mm. Separation from Metal:  Maintain 0.25 inches (12.7mm) from metallic walls 0.25 in (6.35mm) Wiring Considerations Minimum Depth Required: **Measured from maximum fascia height. 1.60 in (40.5mm) EMC Considerations: The SmartCast Wireless Integration module can support up to 25ft cable lengths, however, long cable lengths can cause unintentional EMC compliance failures.
PAGE 5
FCC COMPLIANCE STATEMENT CAUTION: Changes or modifications not expressly approved could void your authority to use this equipment. This device complies with Part 15 of the FCC Rules.