Safety Instructions

ManualsBrandsCREE Lighting ManualsElectronicsWireless Controller

of3

LPN00838X0004A0_A

Connected Max Scene Controller

Smart In-Wall5-Button Scene Controller

Includes: CMACC-CMSC-UNV-WH

IMPORTANT SAFEGUARDS

When using electrical equipment, basic safety precautions should

always be followed including the following:

READ AND FOLLOW

ALL SAFETY

INSTRUCTIONS

1. Before installing Wireless Scene Controller turn offthe power at

the circuit breaker.

Couper l’alimentation avant l’installation

2. These Wireless Scene Controller must be installed in accordance

with the national and local building codes and electrical wiring

codes including wiring methods and wiring connections. If you

are not familiar with these codes and requirements, consult a

qualified electrician.

Ce produit doit être installé conformément à NEC ou votre code

électrique local. Si vous n’êtes pas familier avec ces codes et ces

exigences, veuillez contacter un électricien qualifié.

3. Indoor use only and suitable for damp locations.

Pour usage interieur seulement et convient aux emplacements

humides.

4. Any changes or modifications to these devices not explicitly

approved by manufacturer could void your authority to operate this

equipment.

SAVE THESE INSTRUCTIONS

FOR FUTURE REFERENCE

INSTALLATION INSTRUCTIONS

INSTRUCTIONS D’INSTALLATION

• Voltage: 120-277V, 60Hz

• Depth in Wall: 1.5"

• For ease of installation, Cree recommends the use of a deep wall

box.

• NOT FOR USE WITH METALLIC FACEPLATES.

• Type 1 enclosure & IP20 Indoor use

• Operating Temperature limit of the control: 0 to 35C

• Panel function for Connected Max Smart LEDlights

• Pollution degree 2 Suitable for normal household aircirculation

• Rated impulse voltage: 4000 V

UNIT DESCRIPTION

The Smart In-Wall 5-Button Scene Controller is used with Cree Lighting app to provide wireless preset/scene control of Connected Max Smart LED

lights. Personalize to control or change scenes at the push of button.

LOAD TYPES

Smart In-Wall 5-Button Scene Controller support Cree Lighting Connected Max Smart LED light.

CMACC-CMSC

SCENE CONTROLLER

CMACC-CMSC-UNV-WH

Summary of content (4 pages)

PAGE 1
Connected Max Scene Controller Smart In-Wall 5-Button Scene Controller Includes: CMACC-CMSC-UNV-WH INSTALLATION INSTRUCTIONS INSTRUCTIONS D’INSTALLATION IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS CMACC-CMSC SCENE CONTROLLER CMACC-CMSC-UNV-WH 1. Before installing Wireless Scene Controller turn off the power at the circuit breaker. Couper l’alimentation avant l’installation 2.
PAGE 2
1 2 CMACC-CMSC Top Button/ Button 1 NEUT Button 2 Status LED GND label location Button 3 LINE LED Button 4 Button 5 SUPPLY LEADS SMART IN-WALL 5-BUTTON SCENE CONTROLLER FEATURES • Personalizetocontrolorchange scenesat the push of a button. See Figure 1. • Provides preset scene control from a single-gang push-button wall station. • Personalizedscenesmaybeassigned toeachofthe5buttons.SeeFigure1. • Presetscenesmayassignlightlevels, colortemperatures(CCT), orboth.
PAGE 3
Wall Control Troubleshooting Issue Wireless Scene Controller LED does not blink Resolution STEP 1: Down the free App (Search for Cree Lighting). Check wiring (LINE/NEUT/GND required) STEP 2: Resetthecontrollerandverifythe LEDflashes fast continuously. STEP 3: Check wiring (LINE/NEUT/GND required). Wireless Scene Controller will not join a network SCENE CONTROLLER PAIRING INSTRUCTIONS Resetthecontrollerandverifythe LEDflashes fast continuously.
PAGE 4
© 2020 Cree Lighting, Acompanyof IDEAL INDUSTRIES. All rightsreserved. Forinformationalpurposes only.Content is subject to change. See www.creelighting.com/warranty for warranty and specifications. Cree ® and the Cree logo are registered trademarks and the Cree SmartCast Technology logo is a trademark of Cree, Inc. SmartCast ® , is a registered trademark of Cree Lighting, A company of IDEALINDUSTRIES. www.creelighting.