CREATOR CORPORATION(CHINA) CROSS Series Mixed Matrix Switcher User 's Manual V1.
The meaning of symbols ■Safety instructions For your safe and correct use of equipments, we use a lot of symbols on the equipments and in the manuals, demonstrating the risk of body hurt or possible damage to property for the user or others. Indications and their meanings are as follow. Please make sure to correctly understand these instructions before reading the manual. This is A level product, which may cause radio interference in the living environment.
Important note Warning In order to ensure the reliable performance of the equipment and the safety of the user, please observe the following matters during the process of installation, use and maintenance: The matters needing attention of installation ◆Please do not use this product in the following places: the place of dust, soot and electric conductivity dust, corrosive gas, combustible gas; the place exposed to high temperature, condensation, wind and rain; the occasion of vibration and impact .
Preface CROSS series mixed matrix switcher User 's Manual mainly introduces the operation methods of CROSS-MAX0808,CROSS-MAX1616,CROSS-MAX3232,their main performance parameters and common fault solutions. This manual is only used as user instruction, not for a repair service usage. The functions or related parameters may be changed since the date of issue, please inquire the supplemental information from CREATOR Electronics or local distributors. The copyright of this manual belongs to CREATOR Electronics.
Catalog Chapter 1 Summary ................................................................................................................................. 1 1.1 Equipment ................................................................................................................................ 1 1.2 Features Characteristics .......................................................................................................... 1 1.3 Specifications.....................................................
4.2.3 Xin-CAT8 Input Card Function Characteristics ............................................................ 24 4.2.4 Xin-COMP8 Input Card Function Characteristics ........................................................ 24 4.2.5 Xin-SF8 Input Card Function Characteristics .............................................................. 24 4.3 Output Card ............................................................................................................................ 24 4.3.
CROSS Series Mixed Matrix Switcher User 's Manual 1 Chapter 1 Summary CROSS series mixed matrix switcher is a matrix signal switcher with flexible configuration. With high-performance hardware design, it perfectly supports a variety of high-definition digital / analog signal switching process, and supports bi-directional RS-232, bidirectional IR signal distribution switching function.
CROSS SeriesSeries Mixed Matrix Switcher User 'sSwitcher Manual CROSS Mixed Matrix 2 User 's Manual The positive fast channel signal support fast channel support DVI 1.0 protocol, 3D protocol of HDMI 1.4, HDCP 1.
CROSS SeriesSeries Mixed Matrix Switcher User 'sSwitcher Manual CROSS Mixed Matrix 1.4 User 's Manual Controller Installation The matrix controller uses all metal box ,it can be mounted on a standard19inch cabinet, steps are as follows: CREATOR CHINA 2013-08 WWW.CREATOR1997.
CROSS SeriesSeries Mixed Matrix Switcher User 'sSwitcher Manual CROSS Mixed Matrix 1.5 User 's Manual System Connection Diagram CREATOR CHINA 2013-08 WWW.CREATOR1997.
CROSS SeriesSeries Mixed Matrix Switcher User 'sSwitcher Manual CROSS Mixed Matrix User 's Manual Chapter 2 Hardware Description 2.1 CROSS-MAX0808 Panel View front panel: rear panel: CREATOR CHINA 2013-08 WWW.CREATOR1997.
CROSS SeriesSeries Mixed Matrix Switcher User 'sSwitcher Manual CROSS Mixed Matrix 2.2 User 's Manual CROSS-MAX1616 Panel View front panel: rear panel: CREATOR CHINA 2013-08 WWW.CREATOR1997.
CROSS SeriesSeries Mixed Matrix Switcher User 'sSwitcher Manual CROSS Mixed Matrix 2.3 User 's Manual CROSS-MAX3232 Panel View front panel: CREATOR CHINA 2013-08 WWW.CREATOR1997.
CROSS SeriesSeries Mixed Matrix Switcher User 'sSwitcher Manual CROSS Mixed Matrix User 's Manual rear panel: CREATOR CHINA 2013-08 WWW.CREATOR1997.
CROSS SeriesSeries Mixed Matrix Switcher User 'sSwitcher Manual CROSS Mixed Matrix 2.4 2.4.1 4 - Matrix’s Connection with 5 GND 6 - - Peripherals 7 - - 8 - - Input Interface Description 9 - - Xin-DVI8, Xin-HDMI8, Xin-CAT8, Xin-COMP8, Xin-SF8 input card can be combined into any input signal type. 2.4.2 Output Interface Description Xout-DVI8, Xout-HDMI8, Xout-CAT8, Xout-SF8 output cards can be combined into any output signal type. 9 User 's Manual Signal ground 2.4.
CROSS SeriesSeries Mixed Matrix Switcher User 'sSwitcher Manual CROSS Mixed Matrix 4 GND 10 User 's Manual Signal ground 2.4.7 The Connection between Matrix and Extended Keyboard Connect the matrix controller KEYBOARD interfaces with matrix interfaces of extended keyboard MCP100 one by one according to silk screen with line, you can control the matrix. Details can be found in CR-MCP100 matrix keyboard user’s manual. 2.4.8 Matrix Network Interface 2.4.8.
CROSS SeriesSeries Mixed Matrix Switcher User 'sSwitcher Manual CROSS Mixed Matrix T568B linear order 1 Wh ite ora nge 2 3 ora nge Wh ite gre en 4 5 blu e Wh ite blu e 6 7 gre en Wh ite bro wn 8 bro wn Direct line: two ends connected according to T568B wire order standard. Cross-line: One end connected according to T568A line order, the other connected according toT568B linear order standard.
CROSS SeriesSeries Mixed Matrix Switcher User 'sSwitcher Manual CROSS Mixed Matrix 23 T.M.D. S. Clock + 24 T.M.D.S .Clock- User 's Manual 12 2.4.10 DB15 Male Socket Transfer Line (S terminal, RCA head) 2.4.10.1 DB15 Male Socket Transfer Line Definitions 2.4.11 PB-900 Power Supply Box Note:Optional accessory power supply box PB-900 is used for CROSS-MAX3232 redundant power cold backup, and supports quick change on scene.
CROSS SeriesSeries Mixed Matrix Switcher User 'sSwitcher Manual CROSS Mixed Matrix User 's Manual CREATOR CHINA 2013-08 WWW.CREATOR1997.
CROSS SeriesSeries Mixed Matrix Switcher User 'sSwitcher Manual CROSS Mixed Matrix User 's Manual Chapter 3 Control Panel Operating Instructions 3.1 Matrix Panel Description CROSS-MAX0808 front panel: CROSS-MAX0808 rear panel: CREATOR CHINA 2013-08 WWW.CREATOR1997.
CROSS SeriesSeries Mixed Matrix Switcher User 'sSwitcher Manual CROSS Mixed Matrix User 's Manual CROSS-MAX1616 front panel: CROSS-MAX1616 rear panel: CREATOR CHINA 2013-08 WWW.CREATOR1997.
CROSS SeriesSeries Mixed Matrix Switcher User 'sSwitcher Manual CROSS Mixed Matrix User 's Manual CROSS-MAX3232 front panel: CREATOR CHINA 2013-08 WWW.CREATOR1997.
CROSS SeriesSeries Mixed Matrix Switcher User 'sSwitcher Manual CROSS Mixed Matrix User 's Manual 17 CROSS-MAX3232 rear panel: and video, infrared, and serial, corresponding to ① INPUTS SELECTION——Input channel selection key Signal input channel selection key is used to select input channel of mixed-signals of audio and video, infrared and serial, corresponding to 8/16/32 input ports on rear panel.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher User 's Manual 18 controller to call the switching status of the preset group. central control of system SAVE:Used in CROSS-MAX0808/1616/3232 controller to save the current switching state to specified default group. ENTER:Short Press to confirm the switching selection , perform switching action. 11 Power input port The system supports AC100 ~ 240V 50/60Hz input 1.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher 3.2.1 Switching Operation Example Example: synchronously switch the first channel audio and video, and RS-232 and IR control signals to the output channels of no.3, no.4 channel The steps are as follows: 1, Press switching mode "V / RS” button, lamp is lit. 2. Press input channel "1" key, the key lamp is lit. 3 Press output channels "3,4" keys, the key lamps are lit.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher 3.3.2 User 's Manual 20 Software Startup Turn off the matrix and computer power. The matrix RS-232 interface and the computer's RS-232 communication port are connected with a randomly distributed communication line; Power on matrix and computer; run the Matrix Net Tool Setup.exe of randomly distributed CD-ROM on the control computer, after installation, you can enter the control software interface. 3.3.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher User 's Manual 21 system installation equipment needed by server (matrix controller), the client simply need a computer which can access the Internet. 3.4.3 Connection Diagram System Connection is simple. Connect interface one-to-one, as shown in the following diagram: Figure 2-3 3.4.4 Instructions The following instructions will choose "TP-link" router as an example to illustrate, as follows: 3.4.4.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher User 's Manual Figure 2-6 Figure 2-7 3.4.4.2 Remote Bind Controlled Device Settings Before you can make the remote bind to the matrix controller, first you should know IP of public network connected by the matrix controller,. Only then, can you start setting. Set as follows: The client PC run TCP / UDP debugging software, create a TCP Client connection, fill in the IP address (i.e.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher User 's Manual 23 Chapter 4 Input, Output Card Instructions 4.1 Card Type Name / Model Xin-HDMI8 input card Xin-DVI8 input card Xin-CAT8 input card Xin-COMP8 input card Xin-SF8 input card Xout-HDMI8 output card Xout-DVI8 output card Xout-CAT8 output card Xout-SF8 output card FAN ASSEMBLY fan assembly card BC-100 blank card Radiating card CREATOR CHINA 2013-08 WWW.CREATOR1997.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher 4.2 Input Card 4.2.1 Xin-HDMI8 Input Card Function Characteristics 8 HDMI-A bus interface input; The longest input distance is up to 20M; Support EDID editing function; Is compatible with the HDMI1.4 standard, HDCP1.3 protocol, DVI1.0 protocol; Maximum support resolution: HDPC: 1920x1200P@60_24bit; HDTV: 1920x1080P@60_36bit; 4.2.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher User 's Manual 25 HDPC: 1920x1200P@60_24bit; HDTV:1920x1080P@60_36bit. 4.3.4 Xout-SF8 Output Card Function Characteristics 8 high-speed single core SC fiber interface output; Using multimode fiber OM3 input, the longest distance up to300M; Maximum support resolution: HDPC: 1920x1200P@60_24bit; HDTV:1920x1080P@60_36bit. 4.4 4.4.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher User 's Manual 26 Model Xin-DVI8(DVI input card) Xout-DVI8(DVI input card) Specifications Interface 8 DVI-D female interface / card Signal strength T.M.D.S. +/- 0.4Vpp Minimum / maximum level T.M.D.S. 2.9V/3.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher Model Specifications Xin-HDMI8(HDMI input card) Minimum / maximum level T.M.D.S. 2.9V/3.3V Impedance 50 Ω EDID Optional function Maximum DC offset error User 's Manual default EDID and 27 Xout- HDMI 8(HDMI output card) load N/A 15mV The recommended maximum input / output distance Less than 20 meters, in the 1920x1200@60 (recommended the use of certified DVI special wire.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher User 's Manual Model Xin-CAT8(Twisted pair input card) Specifications Maximum DC offset error 28 Xout-CAT8(Twisted pair output card) 15mV The recommended maximum input / output distance Less than 20 meters, in the1600x1200@60 (recommended the use of certified HDMI special wire. Such as Molex TM wire) Less than 7 meters, in the1600x1200@60 (recommended the use of certified HDMI special wire.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher User 's Manual Model Specifications 29 Xin-COMP8 Interface HD-15 Interface Signal type Composite video CV Y/C video Component video YPbPr VGA video 0dB 0dB 0 dB 0 dB 150MHz @ -3dB 150MHz @ -3dB 350MHz @ -3dB 380 MHz Differential phase error 0.1°,3.58-4.43 MHz 0.1°,3.58-4.43 MHz 0.1°,3.58-4.43 MHz Differential gain error 0.1% , 3.58-4.43 MHz 0.1% , 3.58-4.43 MHz 0.1% , 3.58-4.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher CROSS-MAX0808 Specifications Model User 's Manual 30 CROSS-MAX1616 CROSS-MAX3232 The baud rate and protocol Baud rate: 9600, data bits: 8,stop bit : 1, no parity The serial control port structure 2 = TX,3 = RX,5 = GND KEYBOARD control KEYBOARD control 4 bit 3.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher User 's Manual 31 Chapter 5 Instruction sets Communication protocol Baud rate :9600 bps(default) Data bits:8bits Stop bits:1bit Parity:None Flow control: None Instruction symbols description [Y1], [Y2],... , [Yn] represent the corresponding output ports [TX1], [TX2],... , [TXn] represent the corresponding input serial port / infrared transmitting channels; [RX1], [RX2],...
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher ASCII Instructions (Computer to the matrix) User 's Manual 32 Return(matrix to computer) For example [X1]W[Y1]. Audio and video input [X1] connected to audio and video output [Y1] serial Input port / infrared receiving channel [RX1] connected to the serial output port/ infrared transmitting channel [TY1](AV forward,RS232/IR forward and reverse channel switching) AV:[X1]->[ Y1] RS:[RX1]->[TY1] IR:[RX1]->[TY1] 1W1.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher ASCII Instructions (Computer to the matrix) User 's Manual Command functions Return(matrix to computer) 33 For example AV:[X1]-> [Yn] [X1]A[Y1],[Y2],… ,[Yn]. One-way audio and video input[X1] connected to the multi-channel audio and video output [Y1],[Y2],…,[Yn] AV:[X1]-> [Y1] AV:[X1]-> [Y2] … AV:[X1]-> [Yn] 1A1,2,3. [X1]B[Y1],[Y2],… ,[Yn].
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher ASCII Instructions (Computer to the matrix) User 's Manual 34 Return(matrix to computer) For example One-way infrared receiving channel output port[RY1] connected to the multi-channel infrared transmitting channel input port [TX1] ,[TX2],…,[TXn](IR reverse channel switching) ~IR:[RY1]->[TX1] ~IR:[RY1]->[TX2] … ~IR:[RY1]->[TXn] 1~Q1,2,3. [RY1]~T[TX1],[T X2],…,[TXn].
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher ASCII Instructions (Computer to the matrix) User 's Manual 35 Return(matrix to computer) Command functions For example transmitting channel [TXn] Note: All the switching instructions can be sent in multi-items and multi-types at the same time, such as (1V1.1R1.1Q2.2~R1.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher User 's Manual 36 0*[Y1]! Disconnect one-way audio and video output [Y1] B:OFF->[Y1]! 0*1! [Y1]$. Disconnect one-way audio and video output [Y1] B:OFF->[Y1]! 1$. Disconnect multiplex audio and video output [Y1],[Y2],…,[Yn] B:OFF->[Y1]! B:OFF->[Y2]! … B:OFF->[Yn]! 1,2,3$. [TY1],[TY2],…, [TYn]R$.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher User 's Manual [TX1],[TX2],…,[TXn] All$. Disconnect all audio and video[Yn] and serial input/output port / nfrared transmitting channel [TXn],[TYn] 37 RS:OFF->[TX2]! IR:OFF->[TX2]! … RS:OFF->[TXn]! IR:OFF->[TXn]! All A/V/R/I Closed. All$. Inquire channel connection ASCII Instructions (Computer to the matrix) Status[X1],[X2], …,[Xn]. Inquire[X1],[X2] ,…,[Xn].
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher ASCII Instructions (Computer to the matrix) Status. Inquire.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher User 's Manual 39 Security Settings instructions ASCII Instructions (Computer to the matrix) Command functions Return(matrix to computer) For example /%Lock; Lock the control panel keyboard System Locked! /%Lock; /%Unlock; Unlock the control panel keyboard System Unlocked! /%Unlock; Note: the panel can be locked or unlocked only by serial command.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher ASCII Instructions (Computer to the matrix) User 's Manual 40 Command functions Return(matrix to computer) For example Query the status that one-way or multiplex audio and video cannot be output from which output channel A: [X1]!>[Yn] ! V: [X1]!>[Yn] ! … A: [X2]!>[Yn] ! V: [X2]!>[Yn] ! … A: [Xn]!>[Yn] ! V: [Xn]!>[Yn] ! … QueryF1,2, 3.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher User 's Manual 41 ASCII Instructions (Computer to the matrix) Command functions Return(matrix computer) <#GAR [192]. [168]. [0]. [1]> Set matrix gateway GAR:[192].[168].[0].[ 1] <#GAR192.168.0.1> <#SUBR [255]. [255]. [255]. [0]> Set matrix mask SUBR:[255].[255].[25 5].[0] <#SUBR255.255.255.0> <# SHAR 0x[00]. 0x[11]. 0x[22]. [0x33]. [0x44].
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher User 's Manual 42 ASCII Instructions (Computer to the matrix) Command functions Return(matrix computer) Fastswitch. Switch to a fast mode (default) FASTSWITCH! Fastswitch. RWEDID. Load the first output port of the EDID to all input port EDID-OK!( success) EDID-FAIL!(Failure) RWEDID. DefaultEDID. Restore the system default EDID to all input port EDID-OK! DefaultEDID. [Y1]D[X1], [X2],…[Xn].
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher ASCII Instructions (Computer to the matrix) User 's Manual Return(matrix computer) Command functions 43 to For example automatically exit after the use of the command, and the port activated by output card debugging mode automatically become invalid . EXITSET. Exit component card debugging mode state Command OK! EXITSET. COMP8 card commands - video switching operation instruction 01C02.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher User 's Manual 44 ASCII Instructions (Computer to the matrix) Command functions Return(matrix computer) 03C15. The OSD menu leftward setting Command OK! 03C15. 04C15. The OSD menu rightward setting Command OK! 04C15. 07C15. Automatically adjust the screen settings Command OK! 07C15. 08C15. Automatically adjust function enable Command OK! 08C15. 09C15.
CROSS seriesSeries mixed matrix switchMatrix User 's Manual CROSS Mixed Switcher User 's Manual 45 serial instructions for serial switcher instruction. 3.NO matter forward or reverse switch of infrared and serial signal, one way can be switched to another or more ways, multiple ways cannot be switched at the same time to one way. CREATOR CHINA 2013-08 WWW.CREATOR1997.
CREATOR CORPORATION(CHINA) Copyright by CREATOR Last Revision:08/2013