User Guide

UK / Singapore /
Malaysia
EU / Hong Kong /
Saudi Arabia / UAE
USA / Japan /
Taïwan
China Korea
Australia
Place the AC plug on the power adapter,
then push it back down until you hear a
click.
Pull the power adapter’s clip down to
release the AC plug from its attachment.
GETTING STARTED WITH
THE CREATIVE T60!
Here are a few quick things to run through to get you started!
POWERING THE CREATIVE T60
To power up the Creative T60, plug in the AC power adapter to a power
point, and press once on the power button.
1. Connect (A) to (C) to link up the left and right speakers satellites
2. Connect (B) to the back of the right satellite, plug in the AC power
adapter to a power point (D)
3. Press the power button located a the front of the right speaker satellite
REGION-SPECIFIC AC PLUGS
Creative T60 features a power adapter with interchangeable AC plugs,
suitable for use in multiple regions. The interchangeable AC plugs are
bundled accordingly based on the region that you’re in.
GUIDE TO REPLACING THE
INTERCHANGEABLE AC PLUGS
ATTACHING THE AC PLUG TO THE POWER ADAPTER
REMOVING THE PLUG FROM THE POWER ADAPTER
CONNECTINGTHECREATIVET60
TO YOUR DEVICES
BLUETOOTH5.0
Connect and stream audio wirelessly from your devices to the
Creative T60 via these steps:
1. Ensure that the Creative T60 is powered on
2. Press once on the Power Button
3. Ensure that the LED indicator is Blinking Blue, indicating that it has
entered Bluetooth pairing mode
4. Search for Creative T60 on your devices, and select to pair
5. Once connected, the LED indicator still stop blinking and remain
Solid Blue
CONTROLS
A. VOLUME BUTTON
B. POWER BUTTON / AUDIO SOURCE BUTTON
C. SURROUND BUTTON
Activate this during movies, games, and music for a more immersive
listening experience
SPEAKER / HEADPHONES SWITCH BUTTON
Toggle audio output between Creative T60 speakers and a connected
headset
D. CLEAR DIALOG BUTTON
Suitable for drama-binge, online meetings, and in-game
communications to hear spoken dialogs clearly
BUTTON ACTION LED INDICATOR
Press X1
Solid Red: Power off, Connected to
Wall Socket
Solid Purple: USB Audio Connected
Blinking Blue:Bluetooth Pairing
Solid Blue:Bluetooth Connected
Solid Cyan: AUX-in Connected
Press and Hold 2s LED Off: Power On
Press X1
Solid White: Clear Dialog On
LED Off: Clear Dialog Off
Press X1
Solid White: Surround On
LED Off: Surround Off
Press and Hold 2s
Speakers Mode > Headphones Mode
/ Headset Mode
TOGGLINGBETWEENSOURCES
Press the power button once to toggle between the different sources.
SMARTCOMMSKIT VIA CREATIVE APP
FOR WINDOWS 10 USERS
Download the Creative app to your Windows 10 PC (Version 1703 and later)
from Creative Worldwide Support siteand access our all-newCreative app
featuring the SmartComms Kit, a suite of smart communication features
to simplifythe way you communicate, including auto mute via
VoiceDetect, and removing background noiseson both sides of a
conference call with our noise cancellation features, NoiseClean-in
andNoiseClean-out.
Follow these easy steps:
1. Start by downloading the Creative app from Creative Worldwide
Support siteand install it into your Windows PC.
2. Ensure that the Creative T60 is plugged into your PC.
3. Access the SmartComms Kit module through the Creative App;
make sure it is switched on.
VOILA, YOU'RE DONE.
For those who prefers to have more control over the features, whether it
is to readjust your environmental noise level or your mic mute delay
timing, check the Advanced box found inside the SmartComms Kit
module on the app.
MASTER RESET
Master Reset is reserved for scenarios where users encounter problems
such as Bluetooth pairingproblems or other connectivity issues. Follow
the steps below to reset your Creative T60:
1. Press and hold both Clear Dialog and Surround buttons for 5s
2. The Creative T60 will return to USB mode once Master Reset is
complete
And that's it, you're ready to go.