PAIRING OUTLIER AIR IN 2 EASY STEPS We advise users to charge the earbuds right out the box to enjoy Outlier Air's full potential. STEP Remove both earbuds from the charging case. © Bluetooth The light indicator will blink in red and blue, Bluetooth a meaning that your Creative Montpelier Air i now in Lure vise tn dear Suetonius devices Bluetooth pairing mode. Device name Operator Received dies ® On your device (e.g.
REASSIGNING THE MAIN UNIT: To use a different earbud as the main unit, simply place the intended secondary unit back into the charging case while they're both in use. The unit that is still connected to your device will automatically be assigned as the main unit. This process may take up to PAIRING TO A SECOND BLUETOOTH DEVICE: Disconnect the Outlier Air from your existing device. Press and hold the button of the main unit for 3 seconds to enter into Bluetooth pairing mode.
BATTERY & LED LIGHT INDICATOR LUE AND RED UE, LUE, SLO Initial Pairing Mode Standby mode; ready to FLASHING connect to previously-paired Connected device RED, FLASH RED, SL HING Low battery FLASHING Fully charged Charging [in charging case} Left Earbud Earbuds Charging Right Earbud Charging Case FF Charging, less than Charging, more than Fully charged 30% power 30% power
CHARGING After you've placed the earbuds back into the charging case, make sure that both the ear buds flash a slow, red LED light. This means that both earbuds are now connected to the charging case, and are in the midst of charging. if it doesn't, readjust and push the earbuds into the charging case lightly. A USE Type C-to-A cable has also been provided for you. IN-EAR FITTING Outlier Air comes with 2 earbud sizes so you can customize accordingly.