Instruments, Features and Controls Switches CHIEF Auxiliary Light Switch CHIEFTAIN Auxiliary Light Switch Power Switch Power Switch Saddlebag Lock Switch 23
Instruments, Features and Controls Switches Symbol Switch Emergency Flasher Switch (Hazard Switch) Description The hazard switch activates and cancels the emergency flashers. See page 25. High/Low Headlight The high/low headlight beam switch toggles the headlight between high beam and low beam. See page Beam Switch 27. 24 Auxiliary Light Switch Press the auxiliary light switch to turn the auxiliary lights off or on. See page 27. Horn Switch To sound the horn, press the horn switch.
Switches Instruments, Features and Controls Power Switch Engine Stop/Run Switch The power switch is attached to the fuel tanks on the center console. Press and release the power switch to enable or disable all electrical power to the vehicle. The power switch does not have to be on to start the engine. See page 26. To disable all electrical power if the motorcycle is moving and the engine is running, press and hold the power switch for more than three (3) seconds.
Instruments, Features and Controls Switches Engine Starter Switch Saddlebag Lock Switch Read the engine starting procedures before starting the engine. See page 70. The power switch does not have to be on to start the engine. Press and hold the starter switch to engage the one-touch starting feature, which activates the electrical system and starts the engine. The engine stop/run switch must be in the RUN position and the transmission must be in neutral.
Instruments, Features and Controls Switches Ignition/Light Switch High/Low Headlight Beam Switch The headlights automatically come on when the engine is started. The high/low headlight beam switch toggles the headlight between high beam and low beam. To activate the high beam, press the upper portion of the switch. To activate the low beam, press the lower portion of the switch. The headlights operate only when the engine is running.
Instruments, Features and Controls Instrument Cluster (CHIEF) The instrument cluster includes the speedometer, indicator lamps and Multi-Function Display (MFD). Speedometer Indicator Lamps MFD Indicator Lamps Lamp Indicates Turn Signal The turn signal indicator flashes when the left, right, or both turn signals (hazard) are active. If there is a problem in the signal system, the lamps will flash at twice the normal rate. Cruise Control Status Amber Lamp: Cruise control is enabled, but not set.
Instrument Cluster (CHIEF) Instruments, Features and Controls Multi-Function Display (MFD) The power switch must be ON to access the MFD. Use the mode switches to toggle through the modes of the multifunction display and to change settings in the display. LEFT-TOGGLE Clutch Lever Modes Available Odometer Trip Odometer 1 Trip Odometer 2 Clock Gear Indicator Engine Speed Average Fuel Economy DC Voltage Ambient Air Temperature Fuel Range Odometer The odometer displays total distance traveled.
Instruments, Features and Controls Instrument Cluster (CHIEF) Multi-Function Display (MFD) Display Units (Standard/Metric) The display can be changed to display either standard or metric units of measurement. Distance Fuel Standard Display Miles U.S. Gallons Temperature Time Fahrenheit 12-Hour Clock Metric Display Kilometers I = Imperial Liter = Liters Gallons Celsius 24-Hour Clock 1. Turn the ignition off. 2. Wait 10 seconds. 3. Press and hold the LEFT-TOGGLE switch while pressing the power switch.