350W
Install the 2040 profile with four M4*14 hexagon socket head cap screws are used to; 用4颗M4*14内六角圆柱头螺丝锁紧2040型材;
Insert the printing platform into the component installed in the second step; 将打印平台插进第二步装好的组件;
Install the T-type Screw Rod 安装T型丝杆
6
M5 M5
13 For the first leveling :Set the Z-axis → move down 10mm → remove the motor ; 初始调平:设置移动轴Z轴→向下移动10mm→解除电机;
14 Press the printing platform to the bottom→ move up 10mm in Z-axis → return the motor to zero.
15
16
17
18
280 260 310 280 260 310
Notes 笔记