Assembly Instruction

ARBOR BENCH

HARDWARE

Made in Bolivia - r10

Page 1 of 2

4 - large

bolts (B)

6 x 45

Missing hardware?

Please call 800.606.6387 for replacements.

Thank you for purchasing the Arbor Bench. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and

prepare for assembly, place the contents on a carpeted

or padded area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

NOTE: Do not fully tighten

the bolts until all bolts are

installed.

TOOLS REQUIRED

2 - allen wrenches

(included)

1 Fit notches of each crossbar into corresponding

holes of 2 leg frames as shown. Loosely attach each

leg with 1 bolt (C). Do not fully tighten the bolts until

all bolts are installed.

COMPONENTS

Customer Service 800.967.6696 | Latest instructions availabe at www.crateandbarrel.com

4 - small

bolts (A)

6 x 40

3 - crossbars

2 - leg frames

1 - seat

leg frame

crossbar

8 - bolt

caps (D)

6 - bolts (C)

(6 x 35)

PAGE 1
ARBOR BENCH HARDWARE 4 - small bolts (A) 4 - large bolts (B) 6 - bolts (C) 8 - bolt caps (D) 6 x 40 (6 x 35) Thank you for purchasing the Arbor Bench. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
ARBOR BENCH NOTE: Do not fully tighten bolts until all bolts are installed. leg assembly D D A A B STEP 1 STEP 2 B D D seat B D A B D D A A D D 2 STEP 1) Position seat upside down onto a clean, padded surface as shown. Fit notches of leg assembly into seat as shown. STEP 2) Per diagram, loosely attach each leg with corresponding bolts (A or B) and 1 bolt cap (D). With 1 allen wrench, hold cap and fully tighten large bolt with remaining allen wrench.