Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Made in Taiwan - r01 Page 1 of 2

Thank you for purchasing the Antenna Desk. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ANTENNA DESK

Missing hardware? Please call 800.606.6387 for replacements.

1 - table top 2 - large

crossbars

2 - small

crossbars

1 Fit left and right back legs into small crossbar

with 2 small bolts per leg as shown. Do not fully

tighten the bolts until further instructions.

2 - back legs

(1 left, 1 right)

2 - front legs

(1 left, 1 right)

small

crossbar

left

back leg

right

back leg

8 - small

bolts

8 - large

bolts

6 - adhesive

pads

4 - adjustable

feet

NOTE: Do not fully

tighten the bolts

allen wrench

(included)

PAGE 1
ANTENNA DESK HARDWARE 8 - small bolts 8 - large bolts 4 - adjustable feet 6 - adhesive pads Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Antenna Desk. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ANTENNA DESK NOTE: Do not fully tighten the bolts large crossbar small crossbar front leg assembly right front leg back leg assembly long crossbar left front leg 2 Loosely attach left and right front legs to small crossbar with 2 small bolts per leg. 3 With the assistance of another adult attach large crossbar to front and back leg assembly with 4 large bolts per crossbar as shown. At this point fully tighten all bolts with an allen wrench.