Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

TOOLS REQUIRED

Allen Wrench (included)

Phillips Head Screwdriver

Hammer

1 A. Lay 1 leg frame on its side with the tube fittings

facing up. Slide 2 top rails over tube fittings, making sure

brackets face each other and holes in legs and fittings are

aligned.

B. Secure each rail with 2 machine screws. Do not fully

tighten the screws at this point.

12 - machine screws

10 - wood screws

Thank you for purchasing the Alto High Dining

Table. This page lists all the contents included in

the box. Please take time to identify the hardware

as well as the individual components of this product.

As you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect

them from damage.

COMPONENTS

1 - tabletop

2 - top rails

2 - leg frames

1 - bottom rail

x 2

ALTO HIGH DINING TABLE

Page 1 of 2

Made in China

4 - tube caps

Missing hardware? Please call 800.606.6387 for replacements.

10 - washers

PAGE 1
ALTO HIGH DINING TABLE HARDWARE 10 - wood screws 12 - machine screws 4 - tube caps 10 - washers Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Alto High Dining Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ALTO HIGH DINING TABLE A A B B 2 A. Slide bottom rail over tube fitting. B. Secure with 2 machine screws. Do not fully tighten. 3 A. Fit other leg frame into ends of top & bottom rails. B. Secure leg frame to rails with 2 machine screws per rail. Do not fully tighten. A x 12 B 4 A. Place tabletop on the floor with the pre-drilled holes facing up. With the assistance of another adult, place leg frame assembly on tabletop, aligning holes in tabletop and metal brackets on leg frame.