Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Allegro Wine Tower

ALLEGRO WINE TOWER

ASSEMBLY HARDWARE

TOOLS REQUIRED

Made in China - r07

Page 1 of 4

2 - front wine

rack panels

1 - back panel

Missing hardware?

Please call 800.606.6387 for replacements.

2 - side panels

(1 left, 1 right)

Thank you for purchasing the Allegro Wine Tower. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

(We recommend the use of hand tools instead of power tools)

1 - phillips

bolt

4 - screws

1 - pull12 - wood

dowels

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

COMPONENTS

1 - top panel

1 - adjustable shelf

1 - bottom panel

3 - back wine

rack panels

1 - drawer assembly

16 - allen

bolts

16 - spring

washers

16 - flat

washers

6 - shelf/

drawer pins

phillips head screwdriver

allen wrench (included)

1 - shelf

4 - legs

1 - support panel

Summary of content (4 pages)

PAGE 1
ALLEGRO WINE TOWER ASSEMBLY HARDWARE 16 - allen bolts 1 - phillips bolt 4 - screws 16 - spring washers 16 - flat washers 12 - wood dowels 6 - shelf/ drawer pins 1 - pull Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Allegro Wine Tower. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
ALLEGRO WINE TOWER right side panel left side panel fixed shelf 1 Insert 4 wood dowels into left and right side panels as shown. NOTE: Make sure groove of side panels are assembled as shown 2 Insert 4 wood dowels into fixed shelf as shown. NOTE: Make sure groove of side panels and bottom panel are assembled as shown right side panel left side panel NOTE: Do not over tighten the bolts 3 A) Fit dowels of fixed shelf into corresponding holes of left side panel and right side panels.
PAGE 3
ALLEGRO WINE TOWER back panel top panel 5 Carefully slide back panel into corresponding grooves of assembled unit as shown. 6 Fit dowels of assembled unit into corresponding holes of top panel as shown. Secure with 4 flat washers, 4 spring washers and 4 allen bolts using an allen wrench. C leg B leg 7 Loosely attach 3 legs to assembled unit as shown with 2 flat washers, 2 spring washers and 2 allen bolts per leg.
PAGE 4
ALLEGRO WINE TOWER back wine rack panel front wine rack panel pull 9 Slide 3 back wine rack panels into corresponding slots of 2 front wine rack panels. A drawer pins adjustable shelf shelf pins NOTE: Make sure slated edge is assembled towards the back 10 Attach pull to drawer assembly with 1 phillips bolt using a screwdriver. B drawer assembly wine rack assembly C 11 A) With the assistance of another adult, place unit upright. Insert 4 shelf pins at desired shelf height.