Assembly Instruction

HARDWARE
TOOLS REQUIRED
COMPONENTS
Made in China - r06 Page 1 of 1
Thank you for purchasing the Alfresco Bench. This page
lists all the contents included in the box. Please take time
to identify the hardware as well as the individual compo-
nents of this product. As you unpack and prepare for
assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are required to safely assemble this product.
ALFRESCO BENCH
Missing hardware?
Please call 800.606.6387
for replacements.
1 - benchtop
allen wrench (included)
4 - legs
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
8 - bolt
caps
NOTE: Do not over
tighten the bolts
leg
benchtop
1 A) With the assistance of another adult, place benchtop
upside down onto a clean, padded surface. Fit 4 legs over
sleeves on benchtop as shown.
B) Secure legs to benchtop by tightening pre-installed bolts as
shown using an allen wrench. Do not over tighten the bolts.
C) Cover all exposed bolts with 8 bolt caps.
Assembly is now complete.
A
C
leg
sleeve
bolt cap
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. It is recommended to use coasters to protect
surface from heat and water and to cover the bench if left
outdoors for the winter.
To remove small scratches, the benchtop can be lightly sanded
with a 0000 extra fine steel wool or very fine sand paper.
Remember to always sand in the direction of the wood grain.
B